Intermetro PCD11A, PCD5, PCD7, PCD8, SSD16 General Manual

®

®

Item # ______________________________________________

METRO

®

SUPER ERECTA SLIDE SYSTEM

• Versatile: The Metro Super Erecta Slide System

permits total adaptability of slides and tote boxes
to any 21- or 24 inch-wide (530 or 610mm) Super
Erecta Shelf® open-wire unit. Slides are available
in four sizes and can be positioned quickly and
easily on new or existing units without the use of
tools. Adaptable boxes are available in six sizes,
with varying widths, lengths, and depths.

• Flexible: The Metro Super Erecta Slide System

allows positioning of slides and tote boxes in
vertical, horizontal, or freestyle arrangements, for
maximum utilization of shelf space. 3", 6", and 8"
(76, 152, and 203mm) box depths, in a variety of
lengths and widths, hold a wide range of contents.
The three different box depths, in different
combinations, permit adjustment of shelf spacing
from 12" to 19" (305 to 483mm).

• Easy To Reposition: Repositioning of slides

avoids being “locked in” to one arrangement, as
with permanent vertical, or welded single slide
systems. As requirements change, reposition the
slides on the existing unit or move them to another
Metro stationary or mobile unit.

Job ________________________________________________

Vertical Placement

Super Erecta Slide System

• Adaptable: Customize a wide range of Metro

products, such as exchange carts (shown), stem
caster carts, utility carts, specialty carts, stationary
shelving, and the TopTrack™ High-Density Storage
System, with the Super Erecta Slide System.

• Chrome Slides: Open wire, one-piece slides in

four sizes are easily positioned or repositioned
without tools. Slides install easily by snapping
securely into place on overhead shelf.

• Tote Boxes: Offered in seven sizes for complete

adaptability to Super Erecta Slides. Made of tough
thermoplastic (ABS), these boxes provide years of
service. Tote box dividers and lids are available as
accessories.

• Easy To Clean: Open-wire slide construction

allows for ease of cleaning, on or off the unit.

InterMetro Industries Corporation

®

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

Horizontal Placement

10.07

Freestyle Placement

Copyright © 2000 InterMetro Industries Corp.

Job ________________________________________________

®

®

10.07

METRO

®

SUPER ERECTA SLIDE SYSTEM

SPECIFICATIONS

Super Erecta® Slide System: A super space-saving solution. Using
Super Erecta® wire units 21" or 24" (530 or 610mm) wide, tote boxes
and this innovative slide system, you have the flexibility to create a
custom configuration that can be positioned quickly on new or
existing units without the use of tools. Finish is nickel-chrome wire
with clear protective coating.

Outside Slide Dimensions Approx.

Cat. No. (in.) (mm) (in.) (mm) Adaptable Boxes (lbs.) (kg)

SS2NC 101/4x203/8x215/8 260x517x549 24 610 MTB93030W, MTB93060W, MTB93080W 43/4 2.2
SS3NC 101/4x14x171/8 260x355x435 21 530 MTB93035W, MTB93060W, MTB93080W 31/2 1.6
SS4NC 101/4x251/8x171/8 260x638x435 21 530 MTB93030W,* MTB93060W,* MTB93080W* 5 1.8

*Fits SS4NC wilh box turned sideways.

Load Rating: 25 lbs. (163kg) per level, not to exceed 50 lbs. (227kg) per unit.

Metro Totes Divider Box Line: Metro’s Divider Tote Box Line offers safe and efficient storage of items in bulk, or in compartmentalized
fashion with the use of optional dividers. Manufactured of polypropylene material, these injection-molded totes are available in white
and can be stored and transported in a variety of standard Metro productions (e.g. PT Slide Trucks, Super Slide Systems, etc.).

Cat. No. Fits Slides (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (cu. ft.) (cu. m.) (lbs.) (kg)

TB92035NAT SS3NC 161/2x107/8 419x276 147/8x91/4 378x235 31/2 89 3.0 76 .24 0.79 1.5 .68
TB92060NAT SS3NC 161/2x107/8 419x276 147/8x91/4 378x235 6 152 5.5 140 .44 1.44 2.33 1.1
TB92080NAT SS3NC 161/2x107/8 419x276 147/8x91/4 378x235 8 203 7.5 191 .60 1.97 3.13 1.4
TB93030NAT SS2NC** 221/2x171/2 572x445 201/4x151/8 514x384 3 76 2.5 64 .44 1.44 2.57 1.2
TB93060NAT SS2NC** 221/2x171/2 572x445 201/4x151/8 514x384 6 152 5.5 140 .97 3.18 4.0 1.8
TB93080NAT SS2NC** 221/2x171/2 572x445 201/4x151/8 514x384 8 203 7.5 191 1.32 4.33 5.25 2.4

*Loading height restrictions when using covers or stacking totes.

**Fits SS4NC slide when turned sideways.

Height/Width/Length Fits Shelf Pkd. Wt.

Outside Dimensions Approx.

(includes lip) Inside Dimensions Height Tote Box
Length/Width Length/Width O.D. I.D.* Capacity Wt.

Super

Erecta Slide

system in

place on

shelf

Accessories

Covers & Dividers

For Tote Box Insert Cover Dividers Tote

TB92035NAT CI92000NAT

TB92060NAT CI92000NAT

TB92080NAT CI92000NAT

TB93030NAT CI92000NAT

TB93060NAT CI92000NAT

TB93080NAT CI92000NAT

Shelf Spacing — To determine the spacing required between shelves, total the depths of the tote boxes chosen for a given slide,
and add 4" (100mm) to that total. The table below illustrates tote box combinations and their corresponding shelf spacing.

Short DS92035NAT 11
Long DL92035NAT 7
Short DS92060NAT 11
Long DL92060NAT 7
Short DS92080NAT 11
Long DL92080NAT 7
Short DS93030NAT 15
Long DL93030NAT 11
Short DS93060NAT 15
Long DL93060NAT 11
Short DS93080NAT 15
Long DL93080NAT 11

Maximum

Snap-On Card Holder

Clear vinyl with clear window.

Cat. No. (in.) (mm) Description

OP2501CLR 41/2x73/4 114x199 Fits 6" & 8" (150x203mm)

OP2535CLR 3x5 76x127 Fits 6" & 8" (150x203mm)

Size

Tote Boxes

Tote Boxes

Tote Box Combinations (Per Slide)

Tote Box Depths (76 + 152mm) (152 + 152mm) (76 + 230mm) (152 + 230mm) (76 + 76 + 76mm) (76 + 76 + 152mm) (76 + 76 + 230mm)

Shelf Spacing Required 13" 16" 16" 19" 13" 16" 19"

Super Erecta Slide System

Manufactured by:

®

3" + 6" 6" + 6" 3" + 9" 6" + 9" 3" + 3" + 3" 3" + 3" + 6" 3" + 3" + 9"

(330mm) (406mm) (406mm) (483mm) (330mm) (406mm) (483mm)

InterMetro Industries Corporation

North Washington Street, Wilkes-Barre, PA 18705
Phone: [phone] • Fax: [phone]

For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com

Information and specifications are subject to change

without notice. Please confirm at time of order.

L02-201

Rev. 9/00

Printed in U.S.A.