Intermec G4000, AT-MC1008/GB, AT-MC1008/SP, AT-FS708/POE Compliance Insert

G4000 Compliance Insert

For Users in the United States and Canada

Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.

The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.

Caution: No user-serviceable parts.
Attention: Il ne contient aucune pièce réparable par l’utilisateur.

FCC Digital Emissions Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.

Canadian Digital Apparatus Compliance

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Conformité aux normes canadiennes sur les appareils numériques

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.

For Users Outside of the United States or Canada

Caution: This marking indicates that the user should read all included documentation before use.

Caution: No user-serviceable parts.

CE Marking: Refer to the Declaration of Conformity for a list of the EU Directives and Standards that this product complies with.

Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten

Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.

Vorsicht: Enthält keine Teile, die vom Benutzer gewartet werden können.

CE-Kennzeichnung: Die Konformitätserklärung enthält eine Liste der EU-Richtlinien und Normen, denen das Produkt entspricht.

Para usuários fora do Canadá ou dos Estados Unidos

Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso.

Cuidado: Este equipamento não contém peças que possam ser reparadas pelo usuário.

Marcas CE: Consulte na Declaração de Conformidade a lista de Diretivas e Normas da União Européia com as quais este produto está em

conformidade.

Para usuarios fuera de Canada o de los Estados Unidos

Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.

Precaución: No hay piezas a las cuales pueda dar servicio el usuario.

Marcas de la CE: Remítase a la Declaración de Conformidad para ver una lista de las Directrices y Estándares de la UE con los cuales cumple

este producto.

Worldwide Headquarters

6001 36th Avenue West
Everett, Washington 98203
U.S.A.

tel [phone]
fax [phone]

www.intermec.com

2007 Intermec Technologies

©

Corporation. All rights reserved.

G4000 Compliance Insert

*072246-003*

P/N 072246-003