Intermec 6642 User Manual

Charger Specifications

AC Adapter Power (18V 1.5A)
LEDs Power, Charge
Power Consumption 27W
Operating
Temperature

41° to 95° F (5–35C)

Storage Temperature -4° to 140° F

(-20–60C)

Dimensions 5.9” x 10.86”x 2.12”

(150 x 276 x 54mm)

Weight 2 lbs (917g) AC

Adapter and Charge
Unit

Battery Charge Time

Battery Operating
Time

Approximately 3–5
hours

Approximately 2.5 to 4
hours

WARNING: High temperatures will degrade the performance of these

batteries. Store ONLY in a cool, dry location.

Spent batteries MUST be recycled.
Contact local authorities for a nearby battery recycling program.

 Intermec is a trademark of Intermec Technologies Corporation.
 Copyright 2000 Intermec Technologies Corporation. All rights reserved.

PN: 962-000-012

Revision A

December 2000

*962000012*

P/N 962-000-012 Revision A

6642 EXPANSION BATTERY
CHARGER GUIDE

Packing List

Guide P/N: 962–000–012
AC Adapter/Charger P/N: 871–006–030
Charger Unit P/N: 871–008–060
AC Power Cable P/N: 871–006–050

"

NOTE: This Battery Charger permits external charging of two

Intermec–labeled Lithium–Ion Battery Packs, P/N
317–106–001, rated 11.1 V 3600 mAH only.

Charger Indicator LEDs

Power Green

Charge

Orange
Flashing (80%)
Steady (90%)

Green (Fully Charged)

Error Condition Red

Setup–Connecting the AC Adapter/Charger to the
Charge Unit

1. Unpack the unit and follow the steps outlined below.

WARNING: Use only the AC Adapter P/N 871-006-030 supplied with

the 6642. Use of other AC adapters or AC adapter cords
could result in fire or equipment damage.

Battery Insertion

1. Set the battery lock to the unlocked position on the expansion battery
before inserting it into the charger.

2. Open the battery connector cover on the charging slot.

3. Slide the battery into the slot.

4. Slide the battery downward until it “snaps” in the battery charge slot.

5. Slide the battery lock to the locked position.

"

NOTE: When batteries are charged at different intervals,

one battery is fully charged first, then the second
battery is charged.

Battery Removal

6. Battery removal is the reverse of installation.

7. When charging is completed, disconnect the AC adapter and the
power cord.