Page 1
MODEL ST01 Series
Self-Adjusting Wall Switch Timer
Easy-Set Guide
This Easy-Set Instruction Sheet may be helpful in setting up common timer programs.
Refer to the Installation and User Instructions Sheet for more information.
To Clear the Timer
Press ON/OFF to review Dawn time.
Press and hold down the ON/OFF button.
1.
Using a paper clip or pen, press and release
2.
the RESET button, which is to the lower right of
the + button.
Continue holding ON/OFF until you see
3.
the screen.
4.
Release ON/OFF.
5.
Wait until you see 12:00 am in
Setting the Time and Date
1.
Press MODE to display
2.
Press ON/OFF.
3.
Press + or – to set your hour for the current
time of day.
4.
Press ON/OFF.
Press + or – to set your minutes for the current
5.
time of day.
6.
Press ON/OFF.
7.
Press + to advance the year if needed.
8.
Press ON/OFF.
9.
Press + or – to change the month.
10.
Press ON/OFF.
11.
Press + or – to change the date.
12.
Press ON/OFF. Make sure it’s the correct day of
the week. If not, go back and check the year.
13.
Press ON/OFF to choose DST (Daylight Saving
Time)
•
Press + to select
DST, or
•
Press + again to select
set for DST.
14.
Press ON/OFF to choose zone.
15.
Press + to select your zone. (Refer to map in
the Install Sheet for proper zone).
SETUP.
Man if you do not observe
MANual mode.
Auto to automatically
INIT on
16.
Press ON/OFF twice to review Dusk time.
17.
Press ON/OFF twice to save.
18.
Programming Dusk ON/Dawn OFF
1.
Press MODE to display PGM.
2.
Press ON/OFF three times to choose
3.
Press ON/OFF to choose the days you need,
then press + to change days from
WeeKenD
4.
Press ON/OFF to
5.
Press + to go to Program 2.
6.
Press ON/OFF twice to display
7.
Press ON/OFF to choose the days you need,
then press + to change days from
WeeKenD, or individual day.
8.
Press ON/OFF to
9.
Press MODE to display
Programming Dusk ON/Fixed Time OFF
Press MODE to display PGM.
1.
Press ON/OFF three times to choose
2.
Press ON/OFF to choose the days you need,
3.
then press + to change days from
WeeKenD, or individual day.
Press ON/OFF to
4.
Press + to go to Program 2.
5.
Press ON/OFF twice to display
6.
Press + until you get to 12:00 pm.
7.
Press ON/OFF.
8.
Press + or – to set the hour of the
9.
Press ON/OFF.
10.
, or individual day.
SAVE your work.
DAWN.
SAVE your work.
AUTO.
SAVE your work.
DAWN.
(Continued on the back)
DUSK.
ALL, M-F,
ALL, M-F,
DUSK.
ALL, M-F,
OFF time.
Page 2
Press + or – to set the minutes of the OFF time.
11.
Press ON/OFF to choose the days you need,
12.
then press + to change days from
WeeKenD, or individual day.
Press ON/OFF to SAVE your work.
13.
Press MODE to display
14.
Programming Fixed Time ON/Fixed Time OFF
Press MODE to display PGM.
1.
Press ON/OFF button three times to choose
2.
DUSK.
3.
Press + to change it to 12:00 pm.
4.
Press ON/OFF.
5.
Press + or – to set the hour for the
6.
Press ON/OFF.
7.
Press + or – to set the minutes.
8.
Press ON/OFF to choose the days you need,
then press + to change days from
WeeKenD
9.
Press ON/OFF to
10.
Press + to go to Program 2
11.
Press ON/OFF twice to display
Press + to change it to 12:00 pm.
12.
Press ON/OFF.
13.
Press + or – to set the hour for the
14.
15.
Press ON/OFF.
16.
Press + or – to set the minutes.
17.
Press ON/OFF to choose the days you need,
then press + to change days from
WeeKenD
18.
Press ON/OFF to
Press MODE button to display
19.
, or individual day.
SAVE your work.
, or individual day.
SAVE your work.
AUTO.
ALL, M-F,
ON time.
ALL, M-F,
Dawn.
OFF time.
ALL, M-F,
AUTO.
158ST13136
Loading...