Inter-M RME-6108 User Manual

Operation Manual

Remote MIC Extender

RME-6108

* Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean)

do not have handles installed due to customer preference.

REMOTE MIC EXTENDER

Welcome

Welcome

A personal welcome to you from the management and employees of Inter-M

All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value,
and we are delighted you have purchased one of our products.

We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete
satisfaction, we will endeavor to make things right.

Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

*WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g.

near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do
not fall and liquids are not spilled into the enclosure through openings.

*CLASS 2 WIRING (Adjacent to speaker terminal): The speaker output of this apparatus can exceed 10 Watts and could be a shock injury.

Connection to speakers should be performed by a skilled person.
*Do not install this equipment in a confined space such as a book case or similar unit.
*This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
*This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
*

It has heed to be easy to disconnect the device. To disconnect the device from power, separate AC input cable from inlet or unplug the AC Cord.

*

The socket-outlet shall be installed near the equipment and shall be easily accessible.

CAUTION

*These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing

other than that contained in the operating instructions unless you are qualified to do so.

NOTE
*This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

This symbol is intended to alert the user to the
presence of important operation and maintenance
(servicing) instructions in the literature accompanying
the appliance.

Caution: To prevent electric shock do not use this (polarized) plug with

an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade exposure.

Attentions: Pour préve nir les chocs électriques ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de courant
on une autre sortie de courant, sauf si les lames peuvent
étre insérées à fond sans en laisser aucune partie à
découvert.

REMOTE MIC EXTENDER

1

RME-6108

Contents

Contents

Unpacking .......................................................................................................................................2

Installation

Environment....................................................................................................................................2

Important Safety Instructions.............................................................................................................2

Features............................................................................................................................................3

Equipment Setting and Checking.................................................................................................4

Front Panel ......................................................................................................................................5

Rear Panel .......................................................................................................................................6

Applications ....................................................................................................................................7

Block Diagram ................................................................................................................................8

Specifications ..................................................................................................................................9

Service............................................................................................................................................10

Procedures....................................................................................................................................10

Schematic.....................................................................................................................................10

Parts List .......................................................................................................................................10

Warranty .......................................................................................................................................10

"We, Inter-M to apply the appropriate set of E4 & Class A for Electromagnetic Environment Condition."

REMOTE MIC EXTENDER

2

RME-6108

Installation

Unpacking

Unpacking

Although your RME-6108 is neither complicated nor difficult to operate, we recommend you take a few minutes
to read this brief manual and familiarize yourself with the important information regarding product features,
setup and operation.

As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely
event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.

Installation

Environment

Never place this product in an environment which could alter its performance or reduce its service life. Such
environments usually include high levels of heat, dust, moisture, and vibration.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

S3125A

S3125A

REMOTE MIC EXTENDER

3

RME-6108

Features

Features

Features

- REMOTE MIC EXTENSION

When three (3) or more remote mics (RM-6024) are needed, an RME-6108 can connect up to eight (8)
additional remote mics (RM-6024). Two RME-6108 can be linked to enable a maximum of sixteen (16) remote
mics (RM-6024).

- PRIORITY SETTING FUNCTION (RM1~ RM8)

• Sets the priority for each INPUT terminal. (Initial value: RM1>RM2> . . . . . . >RM8)

• Priority can be set using Windows software provided by Inter-M.

- RS-422 COMMUNICATION INTERFACE

• Long-distance transmitting to remote mic is possible [Max.1KM].
(it is recommended that use within 500M)

REMOTE MIC EXTENDER

4

RME-6108

Equipment Setting and Checking

Equipment Setting and Checking

1. Connect RM1 or RM2 output terminal to rear panel (ECS-6216).

2. Connect REMOTE MIC (RM-6024) to the input terminal of rear panel (RME-6024), Maximum 8ea.

3. Number selection of RM-6024 is based on which ECS-6216 connecting terminal is used (RM1~ RM2) as
shown below:

1) When an RME-6108 is connected to RM1 terminal, remote mics (RM-6024) No.1~ No.8 are numbered as

follows:

2) When an RME-6108 is connected to RM2 terminal, remote mics (RM-6024) No.9~ No.16 are numbered
as follows:

ECS-6216P

RME-6108

RME-6108

RM-1 RM-2

RM-6024 RM-6024

Choose among equipment
number from 9 to 16

Choose among equipment
number from 1 to 8

RME Input Terminal RM1 RM2 RM3 --- RM7 RM8

RM Equipment Number 1 2 3 --- 7 8

RME Input Terminal RM1 RM2 RM3 --- RM7 RM8

RM Equipment Number 9 10 11 --- 15 16

RM1

INPUT

AUDIO

OU

RM2

INPUT

T

AUDIO

OUT

만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지 마십시오.

OUTPUT

RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8

만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지 마십시오.

OUTPUT

RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8

INPUT

INPUT

DC 24V

DC 24V

제품명칭 : REMOTE MIC EXTENDER
모델명 :

RME 6108

정격입력 :

DC 24V, 150mA

제조자명 :
고객지원팀

TEL : [phone]

제품명칭 : REMOTE MIC EXTENDER
모델명 :

RME 6108

정격입력 :

DC 24V, 150mA

제조자명 :
고객지원팀

TEL : [phone]

REMOTE MIC EXTENDER

5

RME-6108

Front Panel

Front Panel

1. RM(REMOTE MIC) OPERATION DISPLAY LED (1CH ~ 8CH)

- It displays connection and operation of RM for each channel.

- If RM is connected normally, it will be on and flicker in TALK mode.

- If it is not connected or it has a problem in communication, it will be OFF.

2. STAND-BY LED

- Solid green indicates “ready to use”; blinking green indicates communication problem.

1

2

REMOTE MIC EXTENDER

6

RME-6108

Rear Panel

Rear Panel

1. OUTPUT TERMINAL

- Outputs the DATA and Audio signal of selected RM among 8 inputs.

2. INPUT TERMINAL (1CH ~ 8CH)

- Used to connect with RM.

3. DC INPUT TERMINAL

- Power input terminal. Check polarity before connecting DC 24V.

- When connecting to PD (Power Distributor), connect to unswitched terminal.

PIN NO. Function

1 RS-422 Data - TX+
2 RS-422 Data - TX­3 RS-422 Data - RX­4Live Data
5 GND
6 RS-422 Data - RX+
7 Balanced Audio Output - HOT
8 Balanced Audio Output - COLD

PIN NO. Function

1 RS-422 Data - RX+
2 RS-422 Data - RX­3 RS-422 Data - TX­4 Live Data Input
5 GND
6 RS-422 Data - TX+
7 Balanced Audio Output - HOT
8 Balanced Audio Output - COLD

OUTPUT

만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지 마십시오.

RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8

INPUT

DC 24V

321

제품명칭 : REMOTE MIC EXTENDER
모델명 :

RME 6108

정격입력 :

DC 24V, 150mA

제조자명 :
고객지원팀

TEL : [phone]

REMOTE MIC EXTENDER

7

RME-6108

Applications

Applications

REMOTE MIC

MIC SW

DC OUT

24V

CONTROL OUT (TO AUTO ANN)

MATRIX

AUTO. ANN

EXT IN

EXT INT

PRE IN REMOTE IN 2 REMOTE IN 1 TIMER IN AUTO ANN IN PRE OUT

SIREN/VOLUME

T

12 0

EP-6216

만일 기재에 이상이 있을 경우

RM1

감전 또는 화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지
마십시오.

제품명칭 : EMERGENCY COMBINATION

SYSTEM

모델명 :

ECS 6216P

정격전압 :

DC 24V, 900mA

제조자명 :
고객지원팀

TEL : [phone]

PD

TIMER

EMG PANEL

12345678

FIRE
SENSOR

910111213141516

/

8

INPUT

INPUT

COM

EXT

AMP
INPUT

LINK IN LINK OUT UPGRADE

1234 5678

91011

INPUT

SPEAKER
OUTPUT

OUTPUT

OUTPUT

RM2

INPUT

AUDIO

T

OU

1234 567

HEHCECEHCEHC EEHCEHCEHC HC HCHCHCHC HCHCHCHC

91011

만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지 마십시오.

만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니
캐비넷을 열거나 내부를 만지지 마십시오.

AUDIO

OUT

12 13 14 15 16

RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8

RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8

TERM.

LOAD OPEN

12 13 14 15 16

SOURCE 1

ECS-6216P

RS 232

SOURCE 2

ADDRESS

12345678910

DC 24V

DC 24V

DC 24V

RME-6108

제품명칭 : REMOTE MIC EXTENDER
모델명 :

RME 6108

정격입력 :

DC 24V, 150mA

제조자명 :
고객지원팀

TEL : [phone]

RME-6108

제품명칭 : REMOTE MIC EXTENDER
모델명 :

RME 6108

정격입력 :

DC 24V, 150mA

제조자명 :
고객지원팀

TEL : [phone]

ADDRESS SETTING: 1~8

RM-6024/6012KP

HD

ADDRESS SETTING: 9~16

RM-6024/6012KP

HD

REMOTE MIC EXTENDER

8

RME-6108

Block Diagram

Block Diagram

RS-422

RS-422

RS-422

RS-422

RS-422

RS-422

RS-422

RS-422

RS-422

RS-422

REMOTE MIC EXTENDER

9

RME-6108

RME-6108

Channel 8CH
Communications Protocol RS-422 (Maximum 1km/3,280 feet)
Operating Temperature -10°C ~ +40°C/14°F ~ 104°F
Power Source DC 24V
Weight (Set) 2.8kg/6.17lbs
Dimensions (Set) 482(W)x44(H)x280(D)mm/19(W)x1.7(H)x11(D)in

Specifications and design are subject to change without notice.

Specifications

Specifications

DIMENSIONS

440

280

5

482

44

REMOTE MIC EXTENDER

10

RME-6108

Service

Service

Procedures

Take steps to insure the problem is not related to operator error or other products within the system. Information
provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the
problem is related to the product contact your warranty provider as described in the warranty section of this
manual.

Schematic

A Schematic is available by contacting your warranty provider.

Parts List

A Parts List is available by contacting your warranty provider.

Warranty

Warranty

Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions
of warranty for a given product may be determined first by locating the appropriate country which the product
was purchased in, then by locating the product type.

To obtain specific warranty information and available service locations contact Inter-M directly or the
authorized Inter-M Distributor for your specific country or region.

13

RME-6108

NOTE

2

RME-6108

NOTE

REMOTE MIC EXTENDER

3

RME-6108

MADE IN KOREA

January 2012 127748

Inter-M, Ltd. (Korea) began operations in 1983.

Since then, Inter-M has grown to become one of the largest manufacturers
of professional audio and commercial sound electronics equipment in the world.

Inter-M has gained worldwide recognition for its own branded products,
as well as private label manufacturing of electronics sold under other names (OEM).

The company is no longer just a Korean company, but rather a global company
that is truly international in scope, with factories and offices in Korea and China,
and sales and marketing operations located in Japan, Europe, and the U.S.A.

With more than 850 employees around the globe,
Inter-M is well-poised for further growth and expansion.

Inter-M Americas, Inc.

13875 Artesia Blvd. Cerritos, CA 90703 USA
TEL : [phone], FAX : [phone]
Home Page : http://www.inter-m.net, E-mail : [e-mail]

Inter-M Corporation

Seoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA
TEL : [phone]~8, FAX : [phone]
Home Page : http://www.inter-m.com, E-mail : [e-mail]