Page 1
Operation Manual
Speaker Selector
PS-6116
* Rack mount products in the Western Hemisphere(North America, South America,
and the Caribbean) do not have handles installed due to customer preference.
Page 2
SPEAKER SELECTOR
Welcome
Welcome
A personal welcome to you from the management and employees of Inter-M
All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value,
and we are delighted you have purchased one of our products.
We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete
satisfaction, we will endeavor to make things right.
Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!
This symbol is intend ed to aler t the user to the
Caution
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution: To prevent electric shock do not use this (polarized) plug with
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette
WaRninG
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
*WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g.
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do
not fall and liquids are not spilled into the enclosure through openings.
*CLASS 2 WIRING (Adjacent to speaker terminal): The speaker output of this apparatus can exceed 10 Watts and could be a shock injury.
Connection to speakers should be performed by a skilled person.
*Do not install this equipment in a confined space such as a book case or similar unit.
*This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
*This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
It has heed to be easy to disconnect the device. To disconnect the device from power, separate AC input cable from inlet or unplug the AC Cord.
*
*
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Caution
*These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you are qualified to do so.
notE
*This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
presence of uninsulated “dangerous voltage” within
the prod uct’s enclos ure t hat m ay be of suffi cient
magnitude to constitute a risk of electric shock to
persons.
This symbol is intend ed to aler t the user to the
presence of important operation and maintenance
(servicing) instructions in the literature accompanying
the appliance.
an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade exposure.
fiche polarisée avec un prolongateur, une prise de courant
on une autre sortie de courant, sauf si les lames peuvent
étre insérées à fon d sa ns en laisser auc une par tie à
découvert.
Page 3
SPEAKER SELECTOR
Contents
Contents
Unpacking .......................................................................................................................................2
Installation
Environment....................................................................................................................................2
Important Safety Instructions.............................................................................................................2
Features............................................................................................................................................3
Operation ........................................................................................................................................3
Front Panel ......................................................................................................................................4
Rear Panel .......................................................................................................................................5
Applications ....................................................................................................................................6
Block Diagram ................................................................................................................................7
Specifications ..................................................................................................................................8
Service
Procedures......................................................................................................................................9
Schematic.......................................................................................................................................9
Parts List .........................................................................................................................................9
Warranty .........................................................................................................................................9
PS-6116
1
Page 4
SPEAKER SELECTOR
S3125A
Unpacking
Unpacking
Although your PS-6116 is neither complicated nor difficult to operate, we recommend you take a few minutes to
read this brief manual and familiarize yourself with the important information regarding product features, setup
and operation.
As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event
the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
Installation
Installation
Environment
Never place this product in an environment which could alter its performance or reduce its service life. Such
environments usually include high levels of heat, dust, moisture, and vibration.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
S3125A
2
PS-6116
Page 5
SPEAKER SELECTOR
Features
Features
-16 ZONE SPEAKER SELECTOR (ALL CALL, GROUP 1, GROUP 2, CH1~16)
19 push type selector switches are provided to enable you to select 16 zone speakers individually or totally.
- EASY CONFIRMING
You can confirm selected zone and the operating mode of system by using label holder and indicating LED on
the front panel.
- ALL SWITCH
You can select all zone speakers use by one switch.
- GROUP 1, GROUP 2 SWITCH
You can select group 1 speakers(CH1~8) or Group 2(CH9~16) by individual group switches.
Operation
Operation
Make certain that speakers and input sources are properly connected before switching the unit on.
Keep volume levels turned down before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This
is due to the built-in protection circuitry, designed to protect the speakers and other system components.
PS-6116
3
Page 6
SPEAKER SELECTOR
Front Panel
Front Panel
1. ALL SWITCH
You can select the all speakers at a time by using this switch.
2. GROUP 1, GROUP 2 SWITCH
You can select the group 1 speakers or group 2 speakers at a time by using these switches.
3. OPERATING MODE INDICATORS
These indicators show operating modes of system.
TIMER: It shows that the system is operated by timer.
REMOTE: It shows that the system is operated by remote control equipment.
4. 1-16 SPEAKER SELECTOR SWITCH
You can select the group 1 speakers or group 2 speakers at a time by using these switches.
4
PS-6116
Page 7
Rear Panel
C
H16 CH15 CH14 CH13 CH12 CH11CH10 CH9 CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1
REMO
TE
( )
(
)
( )
(
)
AMP IN 1
AMP IN 2
A
LL
GROUP1
G
ROUP2
TIMER
DC INPUT
24V
1 2
654
3
Rear Panel
SPEAKER SELECTOR
1. DC INPUT TERMINALS
These terminals are for connection to DC 24V power source.
2. 16 SPEAKER OUTPUT TERMINALS
These terminals are for connection of speaker lines to deliver power output to speakers.
Be careful not to change the Hot and Common Lines.
3. AMP INPUT TERMINALS
These terminals are for connection to speaker output of power amplifier. Be careful not to change the Hot and
Common Lines.
4. REMOTE CONTROL TERMINALS(ALL, GROUP 1, GROUP 2)
You can select the the all speakers, Group 1 speakers or Group 2 speakers by these remote control terminals.
5. TIMER, REMOTE CONTROL INDICATOR TERMINALS
These terminal are for connection to indicator output terminals of timer or remote control equipment.
PS-6116
5
Page 8
SPEAKER SELECTOR
PS-6116
PA-6312/6324
P
D-6359
CLIP
-10dB
-40dB
OUTPUT&PROTECTION
PROT
PUBLIC ADDRESS POWER AMPLIFIER
PA-231 2
P
OWER
O
N
O
FF
PA-6312/6324
CLIP
-10dB
-40dB
OUTPUT&PROTECTION
PROT
PUBLIC ADDRESS POWER AMPLIFIER
PA-231 2
POWER
ON
O
FF
PD-9359A
CH16 CH15 CH14 CH13 CH12 CH11 CH10 CH9 CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1
R
EMO
T
E
( )
( )
( )
( )
AMP IN 1
AMP IN 2
A
LL
GROUP1
G
ROUP2
TIMER
DC INPUT
24V
SPEAKER 1SPEAKER 16
Applications
Applications
6
PS-6116
Page 9
Block Diagram
Block Diagram
SPEAKER SELECTOR
PS-6116
7
Page 10
SPEAKER SELECTOR
)
(
Specifications
Specifications
PS-6116
Speaker Selection 16 Channels, All, Group 1, Group 2
ELECTRICAL
16 Channels, All, Group 1, Group
Indicators
Timer Mode, Remote Mode
Power Source 24V DC
GENERAL
Weight 3.3kg/7.27lb
Dimensions 482(W)x44(H)x280(D)mm/19(W)x1.7(H)x11(D)in
* Specifications and design are subject to change without notice.
※ DIMENSIONS
8
PS-6116
Page 11
SPEAKER SELECTOR
Service
Service
Procedures
Take steps to insure the problem is not related to operator error or other products within the system. Information
provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the
problem is related to the product contact your warranty provider as described in the warranty section of this
manual.
Schematic
A Schematic is available by contacting your warranty provider.
Parts List
A Parts List is available by contacting your warranty provider.
Warranty
Warranty
Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions
of warranty for a given product may be determined first by locating the appropriate country which the product
was purchased in, then by locating the product type.
To obtain specific warranty information and available service locations contact Inter-M directly or the
authorized Inter-M Distributor for your specific country or region.
PS-6116
9
Page 12
Inter-M, Ltd. (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers
of professional audio and commercial sound electronics equipment in the world.
Inter-M has gained worldwide recognition for its own branded products,
as well as private label manufacturing of electronics sold under other names (OEM).
The company is no longer just a Korean company, but rather a global company
that is truly international in scope, with factories and offices in Korea and China,
and sales and marketing operations located in Japan, Europe, and the U.S.A.
With more than 850 employees around the globe,
Inter-M is well-poised for further growth and expansion.
Inter-M Americas, Inc.
13875 Artesia Blvd. Cerritos, CA 90703 USA
TEL : +1-562-921-0313, FAX : +1-562-921-0370
Home Page : http://www.inter-m.net, E-mail : info@inter-m.net
Inter-M Corporation
Seoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA
TEL : +82-2-2289-8140~8, FAX : +82-2-2289-8149
Home Page : http://www.inter-m.com, E-mail : overseas@inter-m.com
MaDE in KoREa
www.inter-m.com
June 2012 131267
Loading...