Interlogix TruVision TVB-4402, TruVision TVB-4405, TruVision TVB-2405, TruVision TVB-4404, TruVision TVB-2404 Installation Manual

TruVision HD

-TVI 720P and

1080P

Bullet Camera

Installation Guide

P/N 1073164-EN • REV C • ISS 22NOV17

Installation Guide 1

Contents

Product overview 2
Camera description 5
Installation 8

Built-in heater in the TVB-2405/4405

camera 12

Program 13
Menu trees 18
Specifications 20
Legal and regulatory information 22

2 Installation Guide

Product overview

This is the installation guide for TruVision 720P and

1080P HD-TVI bullet camera models:

 TVB-2402 (720P Bullet, 2.8 to 12 mm VF lens,

PAL)

 TVB-4402 (720P Bullet, 2.8 to 12 mm VF lens,

NTSC)

 TVB-2404 (1080P Bullet, 2.8 to 12 mm VF

lens, PAL)

 TVB-4404 (1080P Bullet, 2.8 to 12 mm VF

lens, NTSC)

 TVB-2405 (1080P Bullet, 2.8 to 12 mm

motorized VF lens, PAL)

 TVB-4405 (1080P Bullet, 2.8 to 12 mm

motorized

Installation Guide 3

Package contents

 Camera with power

and video output
cables

 4 screws and 4

anchors for wall or
ceiling installation

 Back box

 Screws M4.8 × 18,

4 pcs to attach the
back box

 Template

 Hex wrench

Hole A: for cables routed through the wall

A

Drill Template

1

1

1

2

2

2

2

Screw hole 1: for integrative bracket

Screw hole 2: for conduit back box

4 Installation Guide

• Installation guide

• WEEE disposal

sheet

 CD

• Video test cable

Installation Guide 5

Camera description

Figure 1: Camera description

1. 960H analog output
(black)

2. TVI output (gray)

3. Power cable

4. Camera body

5. Sun shield

6. Lens

7. Mounting bracket

8. Back box

Note: Please check the camera output settings
before setting up a system. The TVI video output
can be only connected to a DVR with a TVI signal
input. The 960H analog output supports a standard

8

2

7

3

1

5

6

4

6 Installation Guide

960H analog monitor (or test monitor), an encoder,
or a DVR.

For 720P VF bullet cameras, TVB-2402 / TVB-4402,
the 960H analog and TVI output cannot be used at
the same time. Use the built-in switch to select the
camera video output.

For 1080P VF bullet cameras, such as TVB­2404/TVB-4404 and TVB-2405/TVB-4405, the built­in switch is used to enable/disable the WDR feature.
When the WDR feature is enabled, the 960H analog
output will be blocked.

Note: When making adjustments to the VF lens
bullet camera, it is important to tighten the access

cover for the area that contains the video test cable
connector, OSD menu button, and the 960H analog
/WDR/TVI selection switch. The access cover

should be rotated until it is tight up against the
camera body.

Installation Guide 7

Figure 2: TVB-2402 /TVB-4402

Focus

Zoom

OSD menu button

Switch (Up= 960H

analog

/ Down = TVI)

BNC output (for video

test cable)

Figure 3: TVB-2404 /TVB-4404

Focus

Zoom

OSD menu button

Switch (Up= 960H

analog

/ Down =

WDR)

BNC output (for video

test cable)