Interlogix TruVision NVR 50, truvision 21 Quick Start Manual

TruVision NVR 50 Quick Start
Guide

P/N 1072605A-EN

• REV 1.0 • ISS 13MAR13

Copyright

© 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of United

Technologies Corporation. All rights reserved.

Trademarks and

patents

The TruVision and Interlogix names and logos are trademarks of United
Technologies.

Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.

Contact

information

www.interlogix.com or www.utcfireandsecurity.eu

DVR 41 Quick Start Guide 1 : EN

Figure 1: Back panel connections

1. Connect to one CCTV monitors (BNC-type
connectors): Main monitor

2. Connect one audio input to RCA connectors.

3. Connect to a RS-232 device.

4. Connect to a network.

5. Connect to an optional eSATA device such as
SATA HDD, CD/DVD-RM.

6. Connect to a power cord.

7. Connect to speakers for audio output.

8. Connect to a VGA monitor.

9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.

10. Connect to an optional USB device such as a
mouse, CD/DVD burner or HDD.

11. Terminate the line to the dome cameras using
this RS-485 switch. Default is Off.

12. Connect to a PTZ control.

13. Connect to a keyboard (KTD-405 shown)

14. Connect up to 16 alarm input cables to relay
outputs.

15. Connect up to four alarm relay outputs.

16. Connect to ground.