Interlogix POE302-SP Specsheet

IFS Line / Network Transmission

POE302-SP
IEEE 802.3at

Power over Gigabit Ethernet
Splitter (PoE+)

OVERVIEW

The IFS Power over Gigabit Ethernet Splitter provides the ability to
use IEEE 802.3at power source equipment (PSE) as part of a cost­effective and efficient power distribution cable management solution
for non-PoE Ethernet edge devices.

By using a PoE enabled Ethernet device, such as an Ethernet
PoE switch or other PSE type device, Ethernet data and PoE
(56VDC) can be transferred up to 100 meters (328 ft.) on a
single network cable.

At the point of deployment, the IFS Power over Gigabit Ethernet
Splitter can be used to separate Ethernet data and provide 12VDC
or 24VDC power to a non-PoE edge device on the network. This
device facilitates easier network planning by eliminating restrictions
of edge device placement near AC power outlets and reduces
the need for AC wiring and installation costs while delivering
higher reliability.

STANDA R D FE ATURES

Installation

• Compact size

• Plug-and-play PoE Self-powered design

• Standalone or wall-mount installation

• Can be used with the IFS POE302-MS Injector or
other PSE IEEE 802.3at compliant devices

Standards Compliance

• Supports 10/100/1000Base-TX Ethernet

• IEEE 802.3/802.3u/802.3ab

• Complies with IEEE 802.3at PoE Standard

PoE Circuit

• Auto-detect of PoE IEEE 802.3at equipment
providing protection from incorrect installation

• Current overload detection

• PoE Ready/In-use LED indicator

Physical Ports

• One RJ-45 connector for data and 56VDC input from power
sourcing equipment (PSE)

• One RJ-45 connector for data

• One power connector for power output to a non-PoE device

• Dip-switch selectable DC voltage output 12VDC@2A max.
or 24VDC@1A max.

Network Cable

• For use with EIA568 Category 5 or better cables

• Can be deployed up to 100m (328 ft.) from Power
Sourcing Equipment (PSE)

Warranty

• 3-year warranty

utcfireandsecurity.com

interlogix.com

POE302-SP

DC Out

Ethernet

PoE In

24V 12V

POE302-SP

Gigabit PoE-AT Splitter

DC Out

Ethernet

24V 12V

North America

T 855-286-8889

Asia

T 852-2907-8108

IEEE 802.3at

Power over Gigabit Ethernet Splitter (PoE+)

Ethernet Description

Data Rate

IEEE Standards

EIA/TIA-568 Standards

Power Over Ethernet (PoE)

PoE Standard

PoE Input Pin Assignment

PoE Input Voltage

Connectors & Indicators

Ethernet + DC In 1 x RJ-45 connector (10/100/1000Base-TX - IEEE 802.3at PoE PD for Data + DC in)
Ethernet Data 1 x RJ-45 connector (10/100/1000Base TX for data out)
DC Output 5.5 x 2.5 mm DC receptacle
LED Indicator PoE Ready/In-use

Electrical and Mechanical

Input Power

Output Power

Maximum Powered Devices

Enclosure

Dimensions (W x D x H)

Weight

Environmental

MTBF

Operating Temperature

Storage Temperature

Relative Humidity

Standards Compliance

Regulatory

EMI

EMS

10/100/1000Mbps

IEEE802.3 10Base-T Ethernet
IEEE 802.3u 10/100 BaseTX Ethernet
IEEE 802.3ab 1000TX Ethernet
IEEE 802.3at Power over Ethernet/PD

10 Base-T 2 pair UTP Cat 3,4,5 to 328 ft. (100m)
100 Base-TX 2 Pair UTP Cat 3,4,5,5e to 328 ft. (100m)
1000 Base-T 2 Pair UTP Cat 5,5e,6 to 328 ft. (100m)
EIA/TIA-568 100ohm (100m)

IEEE 802.3at Power over Ethernet / PD

1/2(+), 3/6(-) End-Span or 4/5(+), 7/8(-) Mid-Span

56VDC

Powered by 56VDC PoE from PSE device on RJ-45 connector

12VDC @ 2A max. or 24VDC @ 1A max. (DIP-switch selectable); 12W max.

1

Metal

3.7 x 2.7 x 1 in. (95 x 70 x 25mm)

0.4 lbs. / 111g

50,000 hrs. @ 25°C

0ºC~50ºC

-20ºC~70ºC

5%–90% (non-condensing)

FCC Part 15 Class A, CE

EN 55022, Class B; EN61000-3-2; EN61000-3-3

EN 55024

Australia

T 61-3-9239-1200

Europe

T 32-2-725-11-20

Dimensional DiagramsSpecifications

POE302-SP

Gigabit PoE-AT Splitter

3.7 in.

(95mm)

PoE In

Ready

Power in-use

2.7 in.
(70mm)

1 in.

(25mm)

Ordering Information

POE302-SP

Note: No power adapter required.

Power over Gigabit Ethernet (PoE+)

Latin America

T 561-998-6114

PoE In

Ethernet

PoE-IEEE 802.3at

24V 12V

DC Out

1 in.

(25mm)

Typical Application

Ethernet PoE Switch

(PSE Device)

Ethernet Switch

(non-PoE)

AC Power

DATA

Power

PoE Injector

(PSE Device)

DATA + 56VDC Power

Cat 5e Cable

100m (328 ft) Max.

56VDC Power

POE302-MS

DATA +

Cat 5e Cable

PoE Splitter

POE302-SP

12VDC or 24VDC Power

PoE Splitter

POE302-SP

12VDC or 24VDC Power

DATA

DATA

Non-PoE

IP Camera

Non-PoE

IP Camera

interlogix.com

utcfireandsecurity.com

Specications subject to change without notice.

© 2012 Interlogix, A UTC Fire & Secu rity Company

All rig hts reser ved.

203-3498 2012/02 (68666F)