Interlogix POE302-MS Specsheet

Product Data Sheet

POE302-MS

Gigabit Power over Ethernet Injector (PoE+)

Overview

The IFS Gigabit Power over Ethernet Injector is a quick and
easy solution that can be used when a network device does not
provide the functionality as a power source equipment (PSE),
such as a non-PoE switch, and yet the edge device being
deployed is a PoE powered device (PD).\This module provides
the ability to combine Gigabit Ethernet data and PoE on a
single category cable for deployment of a PoE powered edge
device up to 100m (328 ft.). This provides a cost-effective and
efficient power distribution cable management solution for a
PoE-centric IP network.\The 100m (328 ft.) distance is based on
the EIA-568 standard and is the maximum distance between
two Ethernet devices. The IFS Power over Gigabit Ethernet
Injector can be deployed at any location within the 100m
(328ft.) cable run; however, typically this device would be
installed closer to the non-PoE device.\This device facilitates
easier network planning by eliminating restrictions of edge
device placement near AC power outlets and reduces the need
for AC wiring and installation costs while delivering higher
reliability.

Standard Features

E Plug-and-play design
E Can be used with other IEEE 802.3at compliant devices
E Supports 10/100/1000-TX Ethernet
E Auto-detect of PoE IEEE 802.3at and 802.3af equipment

providing protection from incorrect installation

E Current overload detect
E PoE Ready/In-use LED indicator
E Can deploy data and PoE on a single Category cable up to

100m (328 ft.) to a PoE powered (PD) edge device

POE302-MS

Gigabit Power over Ethernet Injector (PoE+)

Specifications

Ethernet

Data Rate 10/100/1000Mbps

Throughput (packet per
second)

IEEE Standards

EIA/TIA-568 Standards

Power Over Ethernet (PoE)

PoE Standard IEEE 802.3at Power over Ethernet / PSE

PoE Power Supply Type Mid-Span / Type B

PoE Output Pin
Assignment

PoE Output Voltage 56VDC

Connectors & Indicators

Ethernet + DC Out

Ethernet Data In

DC Input 5.5 x 2.5 mm DC receptacle

LED Indicator 1-power; 1-PoE Ready/In-use

Electrical & Mechanical

Input Power 56VDC @ 0.53A

PoE Output Power 56VDC, 30 watts max., 700mA

Maximum Powered
Devices

Enclosure Metal

Dimensions (W x D x H) 3.7 x 2.75 x 1.0 in.; (95 x 70 x 25mm)

Weight .3 lbs. / 83g

Environmental

MTBF >50,000 hrs. @ 25°C

Operating Temperature 0ºC~50ºC

Storage Temperature -10ºC~70ºC

Relative Humidity 5%-90% (non-condensing)

Accessories

PS56VDC65W-US 56VDC 65W Power Supply

PS56VDC65W-UK 56VDC 65W Power Supply

PS56VDC65W-EU 56VDC 65W Power Supply

148810pps@64Bytes

IEEE 802.3 10Base T / IEEE 802.3u 1000Base­TX / IEEE 802.3ab 1000Base-T / IEEE 802.3at
PoE+

10 Base-T 2 pair UTP Cat 3,4,5 to 328ft (100m)

100 Base-TX 2 Pair UTP Cat 3,4,5,5e to 328Ft
(100m)

1000 Base-T 2 Pair UTP Cat 5,5e,6 to 328ft
(100m)

EIA/TIA-568 100ohm STP (100m)

4/5(+), 7/8(-)

1 x RJ-45 connector (10/100/1000Base-TX with
IEEE 802.3at PoE PSE for data + DC out)

1 x RJ-45 connector (10/100/1000Base TX for
data in)

1

Ordering Information

Part No. Description

POE302-MS

Gigabit Power over Ethernet Injector (PoE+)

As a company of innovation, UTC Fire & Security reserves the right to change product
specifications without notice. For the latest product specifications, visit UTC Fire & Security
online or contact your sales representative.
POE302-MS-2015-05-20 12:40:00 Released :08-MAY-12