Interlogix POE302-EX Specsheet

IFS® Line / Network Transmission

POE302-EX
IEEE 802.3af/at

PoE+ and Ethernet Data Extender

OVERVIEW

The IFS® Power over Ethernet Extender is a quick and easy solution
that can be used when a Powered Device (PD) needs to be installed
beyond the 100 meter (328 ft.) distance limitation of Ethernet. The
module can be powered from any network switch with PoE or from
an IFS Mid-Span Power Injector.

This module provides the ability to extend Ethernet data and PoE
power on a single network cable for remote deployment of an
Ethernet powered device (PD) i.e. IP camera, access control panel,
VoIP or wireless access point (WAP).

The IFS POE302-EX is powered via the PoE power provided by a
PoE switch or injector and thus does not require an external power
adapter. Each extender requires 3.2 watts of PoE power providing
the remaining power to the next extender or PD device.

Up to three POE302-EX extenders can be daisy-chained at
328 ft. (100m) intervals, based on the EIA-568 standard, to extend
Ethernet data and PoE power up to 984 ft. (300m). Maximum
distance (or hops) is dependent upon the remaining PoE power
available to meet the PD power requirements.

The POE302-EX facilitates easier network planning by eliminating
restrictions of edge device placement near AC power outlets
and reducing the need for AC wiring and installation costs while
delivering higher reliability. This results in a cost-effective remote
power and data distribution cable management solution for a
PoE-centric IP network.

STANDARD FEATURES

Installation

• Compact size

• Plug-and-play PoE self-powered design

• Standalone or wall-mount installation

• Can be used with an IFS PoE Injector or other
IEEE 802.3af or 802.3at compliant PSE equipment

Standards Compliance

• Supports 10/100/1000Base-TX Ethernet

• Complies with IEEE 802.3/802.3u/802.3ab

• Complies with IEEE 802.3af or 802.3at PoE Standard

PoE Circuit

• Auto-detect of PoE IEEE 802.3af or 802.3at equipment
providing protection from incorrect installation

• Current overload detection

• LED Indicators for PoE In, PoE Out, Data

• Requires 3.2 watts of PoE power to operate

Physical Ports

• One RJ45 port for data with PoE In

• One RJ45 connector for data with PoE Power Out

Network Cable

• For use with EIA568 Category 5 or better cables

• Can be daisy-chained to extend data and PoE on a single
network cable a maximum of 984 ft. (300m).

Warranty

• 3-year warranty

interlogix.com

Specifi cations

Ethernet Description

Data Rate

Throughput (packet per second)

IEEE Standards

Latency

Maximum Frame Size

EIA/TIA-568 Standards

Power Over Ethernet (PoE)

PoE Standard

PoE Power Supply Type

PoE Output Pin Assignment

PoE Output Power
with Multiple Extenders

Connectors & Indicators

Ethernet + PoE In

Ethernet + PoE Out

LED Indicators

Electrical & Mechanical

Input Power (from PoE switch
or mid-span injector)

PoE Output Power

Power Consumption

Enclosure

Dimensions (W x D x H)

Weight

Environmental

MTBF

Operating Temperature

Storage Temperature

Relative Humidity

Standards Compliance

Regulatory

EMI

EMS

10/100/1000Mbps

14.8Mpps@64Bytes

IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control

4.285

9K Bytes

Category 5 or better

IEEE 802.3af or IEEE 802.3at

Mid-Span / Type B (No external power adapter required)

4/5(+), 7/8(-)

PoE-at 52VDC Power Source (PSE)

100m (328 ft.) up to 24.6 watts
200m (656 ft.) up to 19.2 watts
300m (984 ft.) up to 13.8 watts
400m (1310 ft.) up to 9.4 watts

1 x RJ-45 (PD Mid-Span)

1 x RJ-45 (PSE Mid-Span)

1 PoE In, 1 PoE Out , 1 Data LNK/ACT

Powered by an IEEE 802.3at PSE Device (injector or switch)

48VDC @ 270mA, 52VDC @ 510mA

3.2 Watts (max.)

Metal (Wall-mountable)

3.7 x 2.75 x 1 in. (94 x 70 x 26mm)

0.43 lbs/197g

>50,000 hrs. @ 25°C

-10°C~60°C

-40°C~85°C

5%~95% (non-condensing)

FCC Part 15 Class A, CE

EN 55022 CLASS A
EN61000-3-2
EN61000-3-3

EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC/EN 60950-1

PoE-af 48VDC Power Source (PSE)

100m (328 ft.) up to 11.9 watts
200m (656 ft.) up to 8.4 watts
300m (984 ft.) up to 4.9 watts