IFS POE201-MS/4
4-Port PoE-af Injector
User Manual
P/N 1072580 • REV R00.04 • ISS 31JAN13
Copyright
Trademarks and
patents
Intended use Use this product only for the purpose it was designed for; refer to
Manufacture
Certification
FCC compliance This equipment has been tested and found to comply with the
ACMA compliance Notice! This is a Class A product. In a domestic environment
Canada This Class A digital apparatus complies with Canadian ICES-
European Union
directives
Contact information For contact information see our Web site: www.interlogix.com
Contact support www.interlogix.com/customer support
© 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of
United Technologies Corporation. All rights reserved.
The IFS POE201-MS/4 4-Port PoE-af Injector and logo are
trademarks of United Technologies.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
the data sheet and user documentation for details. For the latest
product information, contact your local supplier or visit us online
at www.interlogix.com.
UTC Fire & Security Americas Corporation, Inc.
2955 Red Hill Avenue
Costa Mesa, CA 92626-5923, USA
EU authorized manufacturing representative:
UTC Fire & Security B.V., Kelvinstraat 7,
6003 DH Weert, The Netherlands
N4131
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
You are cautioned that any changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
this product may cause radio interference in which case the user
may be required to take adequate measures.
003.
Cet appareil numérique de la classe A est conforme á la norme
NMB-003du Canada.
2004/108/EC (EMC Directive): Hereby, UTC Fire & Security
Americas Corporation, Inc. declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
.
Contents
Package Contents 1
Product Features 1
Product Overview 3
LED Indicators 4
Hardware Installation 4
Before Installation 4
Injector Installation 4
Troubleshooting 6
Appendix A: Network Connection 7
RJ-45 Pin Assignments 7
Specifications 9
Contacting Technical Support 10
IFS POE201-MS/4 4-Port PoE-af Injector User Manual i
Package Contents
Thank you for purchasing the IFS POE201-MS/4, an IEEE
802.3af High Power over Ethernet Injector Hub.
Open the package containing the Ethernet Injector Hub and
carefully unpack it. The box should contain the following items:
● POE201-MS/4 x1
● User Manual x1
If any of these items are missing or damaged, please contact
your distributor or IFS Sales Rep. If possible, retain the original
carton and packaging material and use them again to repack
the product in case there is a need to return it to us for repair.
Product Features
The IFS POE201-MS/4 is a 4-Port IEEE 802.3af Power over
Ethernet injector hub complies with IEEE 802.3, IEEE 802.3u
and IEEE 802.3af standards. Equipped with 4 10/100Base-TX
Fast Ethernet ports, the POE201-MS/4 supports full 48V DC
power for any remote IEEE 802.3af powered device (PD) like
Wireless LAN Access Point, IP Phone, and IP Camera.
Providing up to 70 watts, the, POE201-MS/4 provides
sufficient power for up to 4 remote devices.
There are 8 RJ-45 ports on the POE201-MS/4. The ports on
the right panel function as "Data" and the other half on the left
panel function as "Data and Power". Each of the "Data and
Power" port has an injector which inserts DC Voltage into the
CAT 5 cable allowing the cable between the Injector and
Splitter to transfer data and power simultaneously.
• Complies with IEEE 802.3, IEEE 802.3u, 10/100Base-TX
• Complies with IEEE 802.3af, 48V DC power over unused
twisted-pair wires
• 4-Port IEEE 802.3af in-line mid-span power injector box
IFS POE201-MS/4 4-Port PoE-af Injector User Manual 1