Interlogix 600-1053-4-ZX-AT, 600-1053-4-ZX-RG, 600-1053-4-ZX-TM, 600-1053-4-ZX-VZ Specsheet

Intrusion

Wireless
GSM & CDMA
Modules

For use with Concord 4 Systems

Overview

New cellular modules enable the Concord® 4 to communicate
signals wirelessly over either GSM/GPRS or CDMA cellular networks.
This provides users with Alarm.com’s secure wireless signaling
and convenient functionality including real-time event notification,
Web-based remote monitoring and other home system control
capabilities.

The digital wireless communication also enables secure alarm
reporting to any central station, whether or not a phone line is
installed at the system location. Users can remotely monitor and
control their security system via smartphone, tablet or via the
Alarm.com website. Features include viewing system status and
history, arming and disarming the system, setting up user codes,
and creating customized email and text message notifications for
any type of alarm or non-alarm activity at the property.

Additionally, using the Z-Wave
added functionality of controlling Z-Wave class devices such as
lighting and thermostats. These cellular modules also support two­way voice over cellular (with the addition of a SuperBus 2000 Audio
Verification Module), allowing users to speak directly to a central
station in the event of an emergency.

®

enabled modems provides the

Standar d F e atur eS

• Cellular coverage of greater than 95% of North America’s population

• Remote monitoring and control for convenient system access

system anytime, anywhere

• Remote programming via AirFx

without expensive “truck rolls”

• Z-wave class modems enable homeowners to control lighting,

thermostat and more

• Two-way Voice over cellular allows homeowners to speak directly
to a central station during emergencies (standard on all models)

• Cellular module can be located up to 90 ft. (27.4m) from the main

control panel for optimum cellular performance

• LED status lights display signal strength and simplify troubleshooting

™

toolkit troubleshoots issues

The modules interface with the Concord 4 panel data bus
and are powered by the battery or an auxiliary 12VDC power
supply (600-1019 SuperBus 2-amp power supply). Status LEDs
on the module allow for cellular signal strength checking, as well as
troubleshooting during installation. The cellular module can be used
as the primary means of communication or as a backup to a landline
phone connection.

interlogix.com

Wireless
GSM & CDMA
Modules

For use with Concord 4 Systems

Specifications

Compatibility Concord® 4 panels

Power requirements

Power/data bu s One four-wire SuperBus auto addressing power/communication data bus
Inputs One hardwired zone input

Cellular network

LED Indicators PWR, BUS, AUTO, Wireless communication status (5)

Dimensions (H x W x D) 5.25 x 4.125 x 1 in. (133 x 105 x 25 mm)

Case material High-impact, ABS plastic, Belgian gray
Operating temperature 32 to 120ºF (0 to 49ºC)
Storage temperature -30 to 140ºF (-34 to 60ºC)

Humidity 90% relative humidity
Listings FCC Part 15, IC, PTCRB

12V nominal, 65mA (continuous) 1600mA (instantaneous peaks) maximum

(from battery or auxiliary power supply)

Quad Band GSM/GPRS 3G (operates on the 850, 900, 1800 and 1900 MHz

ba n ds), AT&T

™

or T-Mobile® or Dual Band CDMA/1xRTT (3G), Verizon

North America

T 855-286-8889

®

Latin America

T 561-998-6114

Ordering Information

600-1053-4-ZX-AT AT&T GSM/GPRS Cellular Modem; Z-Wave® Enabled
600-1053-4-ZX-RG Rogers GSM/GPRS Cellular Modem; Z-Wave Enabled (Canada Use Only)
600-1053-4-ZX-TM T-Mobile GSM/GPRS Cellular Modem; Z-Wave Enabled
600-1053-4-ZX-VZ Verizon CDMA Cellular Modem; Z-Wave Enabled
600-1019 SuperBus 2000 2-Amp Power Supply

Z-Wa ve® is a registered US tr ademar k of Zensys A /S.
Compli es with FCC a nd Indust ry Canada regulations.

interlogix.com

Specifications subject to change without notice.

© 2013 Interlogix.

All rights reser ved.

Interlogix is par t of UTC Climate, Controls & Security,

a unit of United Technologies Corporation.

302-3648 2013/09 (76231)