Interlogix 600-1021-95R, 600-1040, 80-953-4, 80-966-4, 80-978-4 Specsheet

...
GE
Intrusion Solutions
Security
Concord™ 4 is a full-featured security system for residential and commercial intrusion as well as residential fire detection that complies with false alarm standards. Easy to install and simple to use, Concord’s modular design and advanced software provide outstanding system flexibility to meet the needs of virtually any residential or commercial security application.
High standards
The panel comes standard with eight hardwire zone inputs, including a 2-wire smoke detector loop that can handle up to 20 detectors. A built-in RF receiver with 96-zone capacity (600-1021-95R only) provides instant compatibilty with the complete line of GE Security Learn Mode sensors. Two programmable outputs can be set up to activate external devices during an alarm or other system event.
Easy expansion
Expand Concord’s capabilities by adding SuperBus® 2000 8Z Input Modules for eight additional zones per module, or SuperBus 2000 4-Relay Output Modules to add four more output points. SnapCards also add to system zone inputs and outputs. Each card (one per panel) connects easily to the panel circuit board inside the cabinet for a clutter-free, professional installation. Increase RF coverage area by adding up to four SuperBus 2000 RF receivers or SuperBus 2000 RF transceivers. Each receiver supports all 96 zones.
Expand the system even further with a Phone Interface/Voice Module for on- and off-site system control using touch-tone phones. The module includes a speaker output that provides on-site voice status and alarm messages.
Adding a SuperBus 2000 Energy Saver Module lets users control heating and air conditioning. The Power Line Carrier Power Transformer adds X10 light control. The Wireless Gateway Module allows users to control and monitor the status of the system from the Alarm.com Web site.
Increase power capability for system peripherals with a SuperBus 2000 2-amp Power Supply Module with battery backup. The module provides 2 amps at 12 VDC.
Effortless programming
Conduct quick and easy on-site programming with alphanumeric touchpads and a menu-driven text interface with shortcut menu numbers. A quick programming menu makes it even easier to install smaller, basic systems. For off-site programming, use Enterprise® downloader software (version 3.1 and later).
Concord 4
Macro keys (available only on ATP 2100 and ATP 2600 touchpads) simplify system operation. Pressing a single button performs a system command, eliminating the need to enter in an entire command string. Each of the four macro buttons on these touchpads can be programmed to perform one system command per partition. System commands up to 14 key presses can be programmed.
Macro keys can be used to create custom arming levels. For example, a user might create an arming level that would automatically bypass selected interior sensors to create a special “Night” mode setting.
Standard Features
• Six partitions and eight built-in hardwire zones—96 zones maximum
as either hardwire, wireless, or combination
• 96 wireless zones standard onboard (600-1021-95R only)
• Two onboard programmable outputs
• Compatible with all GE Security crystal and SAW Learn Mode sensors
• SIA CP-01 False Alarm Reduction Standard compliant
• 2- and 4-wire smoke detector compatibility
• Panel auxiliary power provides 1 amp
• Built-in 12-watt siren driver
Additional Features
• 230 user-programmable access codes with programmable authority levels
• Latchkey numeric paging with optional keychain touchpad activation
• Audio verication in partition 1 with VOX mode
(requires Interrogator
• 250-event history buffer viewable from any alphanumeric keypad,
Downloader, or automation device
• Keyswitch arming using a hardwire or wireless zone
• Programmable on site using alphanumeric touchpads or off site
using Enterprise
• Time and status displayed on all touchpads
• 16 schedules available for scheduled lighting and outputs
®
200)
Concord 4
Powerful, expandable security with Learn Mode technology
GE
Security
North America T 888-GE-SECURITY 888-437-3287
Asia T 852-2907-8108 F 852-2142-5063
Australia T 61-3-9239-1200 F 61-3-9239-1299
Europe T 32-2-725-11-20 F 32-2-721-40-47
Latin America T 305-593-4301 F 305-593-4300
www.gesecurity.com
Specifications subject to change without notice.
© 2010 General Electric Company All Rights Reserved
Specifications
Power supply
Required transformer Class II, 16.5 VAC, 40 VA, 60 Hz
Backup battery
Battery backup time
Battery test
Transformer fuse Non-replaceable fuse Panel auxiliary voltage output
Communication formats
Dialing
Formats supported
Capabilities
Inputs
Input zones
Databus format
Databus capacity Up to 16 devices
12 VDC, 4.5 Ah or 7 Ah re­chargeable, sealed, lead-acid 24 hours (when fully charged, with appropriate external load) 15 minutes under load every 24 hours (every 4 hours for UL installations)
Current-limited, 1.0 A max. @ 12 V DC
DTMF or pulse with integrated line seizure relay SIA Digital II (300 bps) or Contact ID 3 central station phone numbers and 5 pager phone numbers
96 max. hardwire or wireless; 8 hardwire zones built in, 96 zone wireless capacity built in (600-1021-95R only) SuperBus 2000 with auto-enrolling capability
Outputs
OUT1/+12V (output 1)
OUT2/OC (output 2) Open-collector, 300 mA max
Auxiliary power output
Environmental
Operating temperature
Storage temperature
Relative humidity 90% max., noncondensing
Physical
Dimensions (HxWxD)
Weight 5 lb., 10 oz. (2.5 kg)
Chassis material
Color Beige
Regulatory
12 VDC, 1.0 A (max. combined with auxiliary power output)
Regulated, current limited, self-resetting 12 VDC: 1.0 A (max. combined with output 1)
32 to 120°F (0 to 49°C); up to 140°F (60°C) under temporary conditions
-30 to 140°F (-34 to 60°C)
14.0 x 12.0 x 3.0 in. (356 x 305 x 76 mm)
0.048-in. (1.2 mm) 16 gauge steel, punched and formed
FCC Parts 15 and 68 UL 985, UL 1023, UL 1635 UL 1610 (600-1040 panel only), cUL SIA CP-01 2000 False Alarm Prevention
Ordering Information
Concord 4 panels
600-1021-95R Concord 4 RF panel
600-1040
Expansion options
60-620-01 SuperBus 2000 energy saver module (ESM) 60-756 Combo input/output SnapCard 60-757 8Z hardwire input SnapCard 60-758 4-output SnapCard 60-770 SuperBus 2000 4 output module 60-774 SuperBus 2000 8Z input module 60-783-02 SuperBus 2000 automation module 60-777-01 SuperBus 2000 phone interface and voice module
60-821-95
600-1053 SuperBus 2000 GSM module 600-1019 SuperBus 2000 2.0 A power supply module 600-1025-01-95R SuperBus 2000 transceiver module
Concord 4 Commercial (does not include 96 zone wireless receiver)
SuperBus 2000 commercial transceiver module (compatible with crystal sensors and touchpads)
Touchpad options
60-597-95 HiTech handheld touchpad 60-659-95R/60-832-
95R/60-606-319.5
60-746-01/60-803-04
60-804-04
60-820 SuperBus 2000 fixed display LCD touchpad 60-983 ATP1000 alphanumeric touchpad 60-985/60-984 ATP2100 and ATP2600 alphanumeric touchpads 600-1020 FTP1000 fixed english touchpad
Transformer options
600-1023
600-1023-CN
600-1024
Crystal, SAW and encrypted Learn More keychain touchpad
SuperBus 2000 2x16 and 2x20 LCD alphanumeric touchpads
SuperBus 2000 2x20 vacuum fluorescent display alphanumeric touchpad
16.5 V, 40 VA standard transformer, UL listed for U.S. applications
16.5 V, 40 VA standard transformer, cUL/CSA listed for Canadian applications
16.5 V, 40 VA power line carrier transformer, UL listed for U.S. applications
910-3243 2010/01 (60105)
Loading...