Intel S3210SHLC - Entry Server Board Motherboard, SC5299UP - Server Chassis Tower, SC5299-E UP, SC5299-E DP, SC5299-E WS User Manual
...
Intel® Entry Server Chassis SC5299-E
UP/DP/WS/BRP User Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products
Intel Order Number D37596-004
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel® server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel
Corporation can not be held responsible if components fail or the server board does not operate correctly when used
outside any of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006-2010, Intel Corporation. All Rights Reserved
ii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
®
Server Deployment Toolkit CD and/or at http://support.intel.com/support/
Intel
motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Intel
oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
®
Server Deployment Toolkit CD
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Intel
vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
®
Server Deployment Toolkit CD ou bien rendez-
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
重要安全指导
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Intel
support/motherboards/server/sb/cs-010770.htm.
®
Server Deployment Toolkit CD y/o en http://support.intel.com/
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide iii
Safety Information
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and
will most likely result in noncompliance with product regulations in the region(s) in which
the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on
your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a
tab, take care when using needle nosed pliers to remove or install a jumper; grip the
narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides
can damage the contacts inside the jumper, causing intermittent problems with the
function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or
other tool you use to remove a jumper, or you may bend or break the pins on the board.
iv Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Preface
About this Manual
Thank you for purchasing and using the Intel® Entry Server Chassis SC5299-E.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and repairing this server chassis. This document provides a brief overview of
the features of the chassis, a list of accessories or other components you may need,
troubleshooting information, and instructions on how to add and replace components on
the Intel
/support.intel.com/support/motherboards/server/chassis/sc5299-e/.
Manual Organization
Chapter 1 provides a brief overview of the Intel® Entry Server Chassis SC5299-E. In this
chapter, you will find a list of the server chassis features, photos of the product, and
product diagrams to help you identify components and their locations.
Chapter 2 provides instructions on adding and replacing components. Use this chapter for
step-by-step instructions and diagrams for installing or replacing components such as the
fans, power supply, drives, and other components.
®
Entry Server Chassis SC5299-E. For the latest version of this manual, see http:/
At the back of this book, you will find technical specifications, regulatory information,
"getting help" information, and the warranty.
Product Contents, Order Options, and Accessories
This server chassis is compatible with the following Intel® Server Boards:
• Intel
• Intel
• Intel
• Intel® Server Board S5000XSL
• Intel® Server Board S3000AH
• Intel® Server Board S3200SHV
• Intel® Server Board S3210SHLC
• Intel® Server Board S3210SHLX
Your Intel
®
Server Board S5000XVN
®
Server Board S5000VSA
®
Server Board S5000PSL
®
Entry Server Chassis SC5299-E ships with the following items:
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide v
Preface
• A power factor correction (PFC) power supply, installed in the chassis. Wattage of
power supply will depend on the model of server chassis you purchased. Three power
supply configurations are available.
• A box of hardware components, referred to below as the "hardware kit"
• Fan cable, installed in the chassis
• Chassis intrusion switch, installed in the chassis
• Front panel, installed in the chassis
• Attention document, in the chassis product box
• Intel® Entry Server Chassis SC5299-E Quick Start User's Guide, in the chassis
product box
• Four M3 screws for installing 5.25-in drive component, in the hardware kit
• Fifteen 6-32 screws for mounting the server board to the chassis, in the hardware kit
• USB cable
In addition, you may need or want to purchase one or more of the following accessory
items for your server:
Processor, memory FBDIMMs, hard drive, CD-ROM or DVD-ROM drive, RAID
controller, operating system.
For information about which accessories, memory, processors, and third-party hardware
have been tested and can be used with your server board, and for ordering information for
®
Intel
products, see http://support.intel.com/support/motherboards/server/chassis/sc5299-
e/compat.htm.
Additional Information and Software
If you need more information about this product or information about the accessories that
can be used with this server chassis, use the following resources. These files are available
at http://support.intel.com/support/motherboards/server/chassis/sc5299-e/
Unless otherwise indicated in the following table, once on this Web page, type the
document or software name in the search field at the left side of the screen and select the
option to search "This Product."
For this information or
software
For in-depth technical
information about this
product, including
dimensions and power
characteristics
If you just received this
product and need to install
it
®
Intel
Entry Server Chassis SC5299-E Technical Product
Specification
®
Intel
Entry Server Chassis SC5299-E Quick Start User's Guide in
the product box
Use this Document or Software
vi Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Preface
For this information or
software
For virtual system tours
and interactive repair
information
Accessories or other Intel
server products
Hardware (peripheral
boards, adapter cards) and
operating systems that
have been tested with this
product
To make sure your system
falls within the allowed
power budget
For software to manage
your Intel
®
server
Use this Document or Software
A link to the SMaRT Tool is available under "Other Resources" at the
right side of the screen at
http://support.intel.com/support/motherboards/server/chassis/
sc5299-e
Spares and Configuration Guide
Tested Hardware/Operating Systems List
Power Budget Tool at
http://support.intel.com/support/motherboards/server/chassis/
sc5299-e
®
System Management Software
Intel
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide vii
Preface
viii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Contents
Safety Information ..................................................................................................... iii
Important Safety Instructions ................................................................................................ iii
Wichtige Sicherheitshinweise ............................................................................................... iii
Consignes de sécurité .......................................................................................................... iii
Instrucciones de seguridad importantes ............................................................................... iii
Warnings ............................................................................................................................... iv
Preface .........................................................................................................................v
About this Manual .................................................................................................................. v
Manual Organization ..............................................................................................................v
Product Contents, Order Options, and Accessories ..............................................................v
Additional Information and Software ..................................................................................... vi
Server Chassis Features ............................................................................................1
Component Identification .......................................................................................................3
Front View Components ................................................................................................3
Internal Components .....................................................................................................5
Back Panel Components ...............................................................................................7
Front Panel ....................................................................................................................8
Peripheral Devices .................................................................................................................9
Hard Disk Drives ............................................................................................................9
Front Bezel Assembly ..........................................................................................................10
Rack-Mounted Systems .......................................................................................................10
Mechanical Locks ................................................................................................................11
Accessories and Order Codes .............................................................................................11
Hardware Installations and Upgrades ....................................................................13
Before You Begin .................................................................................................................13
Tools and Supplies Needed ........................................................................................13
System References .....................................................................................................13
Removing and Installing the Left Side Cover .......................................................................13
Removing the Left Side Cover .....................................................................................13
Installing the Left Side Cover .......................................................................................14
Removing and Installing the Right Side Cover ....................................................................15
Removing the Right Side Cover ..................................................................................15
Installing the Right Side Cover ....................................................................................16
Removing and Installing the Front Bezel Assembly ............................................................17
Removing the Front Bezel Assembly ..........................................................................17
Installing the Front Bezel Assembly ............................................................................18
Removing and Installing the Processor Air Duct .................................................................19
Removing the Processor Air Duct ...............................................................................19
Installing the Processor Air Duct .................................................................................20
Installing or Removing a Server Board ................................................................................20
Installing and Removing a Fixed Hard Drive .......................................................................26
Installing a Fixed Hard Drive .......................................................................................26
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide ix
Removing a Fixed Hard Drive ..................................................................................... 32
Installing or Removing a DVD-ROM or CD-ROM Drive ...................................................... 35
Installing a DVD-ROM or CD-ROM Drive ................................................................... 35
Removing a CD-ROM or DVD-ROM Drive ................................................................. 37
Installing the Removing PCI Add-in Boards ........................................................................ 38
Installing PCI Add-in Boards ....................................................................................... 38
Removing PCI Add-in Boards ..................................................................................... 40
Replacing the Front Panel Board ........................................................................................ 42
Replacing a System Fan ..................................................................................................... 46
Replacing a Fixed Power Supply ........................................................................................ 49
Installing an Additional Hot Swap Power Supply Module (BRP configuration only) ............ 52
Replacing a Hot Swap Power Supply (BRP configuration only) .......................................... 53
Replacing a Hot Swap Power Supply Cage (BRP configuration only) ................................ 54
Installing Feet for a Pedestal-configured Chassis ............................................................... 59
Hot Swap Drive Cage Upgrade Install Instructions (optional) ..............................61
Before You Begin ................................................................................................................ 61
Kits Required ............................................................................................................... 61
Tools and Supplies Needed ........................................................................................ 61
System References ..................................................................................................... 61
Installing a Hot Swap Hard Drive Cage with a SAS/SATA or SCSI Backplane .................. 62
Installing a Hot Swap Hard Drive ........................................................................................ 73
Rack Mount Kit Install Instructions (optional) .......................................................81
Before You Begin ................................................................................................................ 81
Tools and Supplies Needed ........................................................................................ 81
System References ..................................................................................................... 81
Setting up a Rack-configured Chassis ................................................................................ 81
Technical Reference .................................................................................................93
Cable Routing ...................................................................................................................... 93
Power Supply Specifications ............................................................................................... 93
420-W Single Power Supply Input Voltages ............................................................... 93
420-W Single Power Supply Output Voltages ............................................................. 93
550-W Single Power Supply Input Voltages ............................................................... 94
550-W Single Power Supply Output Current ............................................................... 94
670-W Single Power Supply Input Voltages ............................................................... 94
670-W Single Power Supply Output Voltages ............................................................. 94
650-W Single Power Supply Input Voltages ............................................................... 95
650-W Single Power Supply Output Voltages ............................................................. 95
System Environmental Specifications ................................................................................. 95
A. Safety Information ................................................................................................97
English ................................................................................................................................. 97
Server Safety Information ........................................................................................... 97
Safety Warnings and Cautions .................................................................................... 97
Intended Application Uses .......................................................................................... 98
Site Selection .............................................................................................................. 98
Equipment Handling Practices .................................................................................... 98
Power and Electrical Warnings ................................................................................... 98
System Access Warnings ........................................................................................... 99
Rack Mount Warnings ............................................................................................... 100
x Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Electrostatic Discharge (ESD) ...................................................................................100
Other Hazards ...........................................................................................................101
Deutsch ..............................................................................................................................102
Sicherheitshinweise für den Server ...........................................................................102
Sicherheitshinweise und Vorsichtsmaßnahmen ........................................................102
Zielbenutzer der Anwendung .....................................................................................103
Standortauswahl ........................................................................................................103
Handhabung von Geräten .........................................................................................103
Warnungen zu Netzspannung und Elektrizität ..........................................................104
Warnhinweise für den Systemzugang .......................................................................105
Warnhinweise für Racks ............................................................................................106
Elektrostatische Entladungen (ESD) .........................................................................106
Andere Gefahren .......................................................................................................107
Français .............................................................................................................................108
Consignes de sécurité sur le serveur ........................................................................108
Sécurité: avertissements et mises en garde ..............................................................108
Domaines d’utilisation prévus ....................................................................................109
Sélection d’un emplacement .....................................................................................109
Pratiques de manipulation de l’équipement ...............................................................109
Alimentation et avertissements en matière d’électricité .............................................110
Avertissements sur l’accès au système .....................................................................111
Avertissements sur le montage en rack ....................................................................112
Décharges électrostatiques (ESD) ............................................................................112
Autres risques ............................................................................................................113
Español ..............................................................................................................................114
Información de seguridad del servidor ......................................................................114
Advertencias y precauciones sobre seguridad ..........................................................114
Aplicaciones y usos previstos ....................................................................................115
Selección de la ubicación ..........................................................................................115
Manipulación del equipo ............................................................................................115
Advertencias de alimentación y eléctricas .................................................................116
Advertencias el acceso al sistema ............................................................................117
Advertencias sobre el montaje en bastidor ...............................................................118
Descarga electrostática (ESD) ..................................................................................118
B. Installation/Assembly Safety Instructions .......................................................125
English ...............................................................................................................................125
Deutsch ..............................................................................................................................127
Français .............................................................................................................................130
Español ..............................................................................................................................132
Italiano ...............................................................................................................................134
C. Getting Help ........................................................................................................137
World Wide Web ................................................................................................................137
Telephone ..........................................................................................................................137
U.S. and Canada .......................................................................................................137
Europe .......................................................................................................................137
In Asia-Pacific region .................................................................................................138
Japan ........................................................................................................................138
Latin America .............................................................................................................138
D. Intel® Server Issue Report Form ...................................................................... 141
E. Warranty ..............................................................................................................145
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide xi
Limited Warranty for Intel® Chassis Subassembly Products ............................................ 145
Extent of Limited Warranty ................................................................................................ 145
Warranty Limitations and Exclusions ................................................................................ 146
Limitations of Liability ................................................................................................ 146
How to Obtain Warranty Service ....................................................................................... 146
Telephone Support .................................................................................................... 147
Returning a Defective Product .................................................................................. 147
F. Regulatory and Compliance Information .........................................................149
Product Regulatory Compliance ........................................................................................ 149
Product Safety Compliance ....................................................................................... 149
Product EMC Compliance - Class A Compliance ..................................................... 150
Certifications / Registrations / Declarations .............................................................. 150
Product Regulatory Compliance Markings ................................................................ 151
Electromagnetic Compatibility Notices .............................................................................. 152
FCC Verification Statement (USA) ............................................................................ 152
Industry Canada (ICES-003) ..................................................................................... 153
Europe (CE Declaration of Conformity) ..................................................................... 153
VCCI (Japan) ............................................................................................................ 153
BSMI (Taiwan) .......................................................................................................... 154
Korean Compliance (RRL) ........................................................................................ 154
Regulated Specified Components ............................................................................. 154
Restriction of Hazardous Substances (RoHS) Compliance .............................................. 155
End of Life / Product Recycling ......................................................................................... 155
xii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
List of Figures
Figure 1. Front View of Intel® Entry Server Chassis SC5299-E................................................. 1
Figure 2. Front View Components (with Front Bezel Assembly)................................................ 3
Figure 3. Front View Components (without Front Bezel Assembly)........................................... 4
Figure 4. Internal Components (DP/WS/BRP Configuration)..................................................... 5
Figure 5. Internal Components (UP Configuration).................................................................... 6
Figure 6. Back Panel Components.............................................................................................7
Figure 7. Front Panel Components ............................................................................................8
Figure 8. Optional Peripheral Devices (DP/WS/BRP configuration shown)............................... 9
Figure 9. Mechanical Locks......................................................................................................11
Figure 10. Removing Left Side Cover ...................................................................................... 14
Figure 11. Installing Left Side Cover ........................................................................................ 14
Figure 12. Removing Right Side Cover from Chassis.............................................................. 15
Figure 13. Re-installing Right Side Cover on Chassis .............................................................16
Figure 14. Removing Front Bezel Assembly (DP/WS/BRP configuration shown) ................... 17
Figure 15. Installing the Front Bezel Assembly (DP/WS/BRP configuration shown) ...............18
Figure 16. Removing Processor Air Duct................................................................................. 19
Figure 17. Installing Processor Air Duct................................................................................... 20
Figure 18. Removing Drive Cage EMI Shield from Fixed Drive Cage (DP/WS/BRP configuration
shown)................................................................................................................................21
Figure 19. Removing Fixed Hard Drive Cage (DP/WS/BRP configuration shown).................. 22
Figure 20. Removing PCI Card Guide......................................................................................22
Figure 21. Re-installing PCI Card Guide into Chassis ............................................................. 23
Figure 22. Inserting Fixed Hard Drive Cage into Chassis (DP/WS/BRP configuration only) ... 24
Figure 23. Re-attaching Drive Cage EMI Shield ......................................................................25
Figure 24. Drive Bay Slot Order ............................................................................................... 26
Figure 25. Removing Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration shown)
27
Figure 26. Removing PCI Card Guide......................................................................................28
Figure 27. Routing Hard Drive Power Cables .......................................................................... 28
Figure 28. Unlatching Drive Latch............................................................................................ 29
Figure 29. Inserting Hard Drive into Drive Cage ...................................................................... 29
Figure 30. Latching Drive Latch ...............................................................................................30
Figure 31. Drive Bay Slot Order ............................................................................................... 30
Figure 32. Cabling a Fixed Hard Drive..................................................................................... 31
Figure 33. Re-installing Drive Cage EMI Shield....................................................................... 31
Figure 34. Re-installing PCI Card Guide.................................................................................. 32
Figure 35. Removing Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration shown)
33
Figure 36. Preparing Fixed Hard Drive for Removal ................................................................ 34
Figure 37. Removing Fixed Hard Drive from Drive Bay ........................................................... 34
Figure 38. Re-installing Drive Cage EMI Shield....................................................................... 34
Figure 39. Removing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown)................ 35
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide xiii
Figure 40. Installing CD-ROM or DVD-ROM Drive (DP/WS/BRP configuration shown) ......... 36
Figure 41. Removing CD-ROM or DVD-ROM Drive (DP/WS/BRP configuration shown) ....... 37
Figure 42. Installing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown) ................. 38
Figure 43. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration shown).. 39
Figure 44. Removing PCI Slot Shield ...................................................................................... 39
Figure 45. Installing PCI Add-in Board..................................................................................... 40
Figure 46. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration shown).. 41
Figure 47. Removing PCI Add-in Board................................................................................... 41
Figure 48. Replacing PCI Slot Shield....................................................................................... 42
Figure 49. Removing Right Side Cover from Chassis ............................................................. 43
Figure 50. Unattaching Front Panel Board from Chassis ........................................................ 43
Figure 51. Removing Front Panel Board from Chassis ........................................................... 44
Figure 52. Removing Standoffs from Front Panel.................................................................... 44
Figure 53. Installing Front Panel Board in Chassis.................................................................. 45
Figure 54. Positioning Front Panel Board in Chassis .............................................................. 45
Figure 55. Re-installing Right Side Cover on Chassis............................................................. 46
Figure 56. Removing Fan Duct / System Fan Assembly (DP/WS/BRP configuration)............ 47
Figure 57. Removing System Fan from Chassis (UP Configuration)....................................... 47
Figure 58. Installing System Fan in Chassis (UP configuration).............................................. 48
Figure 59. Re-installing Fan Duct / System Fan Assembly (DP/WS/BRP configuration) ........ 48
Figure 60. Unlocking Fixed Power Supply from Chassis......................................................... 49
Figure 61. Removing Fixed Power Supply from Chassis......................................................... 50
Figure 62. Inserting Fixed Power Supply in Chassis ............................................................... 50
Figure 63. Locking Fixed Power Supply into Chassis.............................................................. 51
Figure 64. Removing Power Supply Filler Panel ..................................................................... 52
Figure 65. Inserting Additional Hot Swap Power Supply Module............................................. 52
Figure 66. Removing Hot Swap Power Supply Module from Chassis..................................... 53
Figure 67. Inserting Hot Swap Power Supply Module in Chassis............................................ 53
Figure 68. Removing Hot Swap Power Supply Module........................................................... 54
Figure 69. Detaching Hot Swap Power Supply Cage from Inside of Chassis.......................... 55
Figure 70. Detaching Hot Swap Power Supply Cage from Rear of Chassis ........................... 55
Figure 71. Removing Rear Support Bracket from Hot Swap Power Supply Cage .................. 56
Figure 72. Attaching Rear Support Bracket to Power Supply Cage ........................................ 56
Figure 73. Securing Hot Swap Power Supply Cage to Rear of Chassis.................................. 57
Figure 74. Securing Hot Swap Power Supply Cage to Inside of Chassis................................ 57
Figure 75. Re-installing Hot Swap Power Supply Module(s) ................................................... 58
Figure 76. Installing Feet on Chassis....................................................................................... 59
Figure 77. Removing Fixed Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration
shown) ............................................................................................................................... 62
Figure 78. Removing Fixed Hard Drive Cage from Chassis (DP/WS/BRP configuration shown)
63
Figure 79. Removing Stud Screws from Hot Swap Drive Cage............................................... 64
Figure 80. Attaching Latch Plate to Hot Swap Drive Cage ...................................................... 64
Figure 81. Attaching Filler Panel to Hot Swap Drive Cage ...................................................... 65
Figure 82. Removing Thumb Screws from Backplane............................................................. 65
Figure 83. Attaching Fan Bracket to Hot Swap Drive Cage (SAS/SATA drive cage illustrated)..
66
xiv Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Figure 84. Attaching Fan to Fan Bracket..................................................................................67
Figure 85. Inserting Hot Swap Drive Cage into Chassis (DP/WS/BRP configuration shown)..68
Figure 86. Cabling the SCSI Hot Swap Drive Cage (DP/WS/BRP configuration shown) ........69
Figure 87. Layout of Cable Connectors on the SAS/SATA Backplane (Backplane without ex-
pander shown)....................................................................................................................70
Figure 88. Making Six-drive SAS/SATA Hot-Swap Drive Cage Backplane without Expander
Connections (DP/WS/BRP configuration shown - fan bracket not shown in the illustration for
clarity).................................................................................................................................71
Figure 89. Making Six-drive Hot Swap Drive Cage Backplane with Expander Connections (DP/
WS/BRP configuration shown - fan bracket not shown in the illustration for clarity).......... 72
Figure 90. Opening Drive Bay Access Door.............................................................................73
Figure 91. Releasing Drive Carrier from Hot Swap Drive Cage............................................... 74
Figure 92. Removing Retention Device from Drive Carrier...................................................... 74
Figure 93. Installing Hard Drive into Drive Carrier....................................................................75
Figure 94. Re-installing Drive Carrier in Hot Swap Drive Cage................................................ 75
Figure 95. Closing Drive Bay Access Door .............................................................................. 76
Figure 96. Opening Drive Bay Access Door.............................................................................76
Figure 97. Removing Drive Carrier from Hot Swap Drive Cage............................................... 77
Figure 98. Removing Hard Drive from Drive Carrier ................................................................ 77
Figure 99. Installing Hard Drive in Drive Carrier.......................................................................78
Figure 100. Installing Plastic Retention Device in Drive Carrier............................................... 78
Figure 101. Re-installing Drive Carrier in Hot Swap Drive Cage.............................................. 79
Figure 102. Closing Drive Bay Access Door ............................................................................ 79
Figure 103. Removing Chassis Feet........................................................................................ 82
Figure 104. Removing Top Side Cover from Chassis.............................................................. 82
Figure 105. Removing PCI Card Guide....................................................................................83
Figure 106. Removing Plastic Filler Panel from Chassis (DP/WS/BRP configuration shown). 84
Figure 107. Removing Plastic Plugs (DP/WS/BRP configuration shown)................................ 85
Figure 108. Removing Rear Screws (DP/WS/BRP configuration shown)................................ 85
Figure 109. Removing Plastic Plugs from Top Side Cover ...................................................... 86
Figure 110. Installing Rack Handle on Left Side Cover............................................................86
Figure 111. Affixing Label to Front Panel................................................................................. 87
Figure 112. Installing Top Side Cover on Chassis ................................................................... 87
Figure 113. Detaching Inner Rack Rail from Rack Rail Assembly ........................................... 88
Figure 114. Attaching Inner Rack Rails to Chassis (DP/WS/BRP configuration shown) ......... 89
Figure 115. Attaching Outer Rack Rails to Rack Uprights .......................................................90
Figure 116. Installing Chassis into Rack .................................................................................. 91
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide xv
xvi Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
List of Tables
Table 1. Breakdown of Intel® Entry Server Chassis SC5299-E Configurations ......................... 1
Table 2. Server Chassis Features..............................................................................................2
Table 3. Accessories and Order Codes ...................................................................................11
Table 4. 420-W Power Supply Output Capability..................................................................... 93
Table 5. 550-W Power Supply Output Capability..................................................................... 94
Table 6. 670-W Power Supply Output Capability..................................................................... 94
Table 7. 650-W Power Supply Output Capability..................................................................... 95
Table 8. System Environmental Specifications ........................................................................ 95
Table 9. Product Regulatory Compliance Markings............................................................... 151
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide xvii
xviii Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
1 Server Chassis Features
This chapter describes the main features of the Intel® Entry Server Chassis SC5299-E.
The location of important chassis components and connections, as well as a description of
LED identification, are also presented.
AF000307
®
Figure 1. Front View of Intel
®
The Intel
Entry Server Chassis SC5299-E is a 5.2U pedestal1 server chassis and is
Entry Server Chassis SC5299-E
available in four configurations: UP (uni-processor),DP (dual-processor), WS
(workstation), and BRP (base redundant power). The chassis is designed to support the
®
Server Boards S5000XVN, S5000PSL, S5000XSL, S5000VSA, S3000AH,
Intel
S3200SHV, S3210SHLC and S3210SHLX. The type of server board supported is
dependent upon the configuration purchased. See Table 1 for a list of the Intel
®
server
boards that are supported by each server chassis configuration.
Table 1. Breakdown of Intel® Entry Server Chassis SC5299-E Configurations
Intel® Entry Server Chassis
SC5299-E
UP (Uni-processor) Intel® Server Boards S3200SHV, S3210SHLC and
DP (Dual-processor) Intel
WS (Workstation) Intel
BRP (Base Redundant Power) Intel
1. The Intel® Entry Server Chassis SC5299-E can be configured as a rack-mountable server chassis when outfitted
with the optional Rack Mount Kit (order code APP3RACKIT).
Configuration
S3210SHLX
®
Server Boards S5000VSA, S5000XSL, S5000PSL and
S3000AH
®
Server Board S5000XVN
®
Server Boards S5000VSA, S5000XSL, S5000PSL and
S3000AH
®
Intel
Server Boards Supported
1
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 1
Server Chassis Features
NOTES:
1. For updated server board support, go to http://support.intel.com/support/motherboards/server/
chassis/sc5299-e/.
Table 2 summarizes the features of the Intel® Entry Server Chassis SC5299-E.
Table 2. Server Chassis Features
Feature Description
Dimensions (pedestal) • 17.8 in (45.2 cm) high with feet; 17.6 in (44.7 cm) without feet
• 9.256 in (23.5 cm) wide
• 19.2 in ( 48.7 cm) deep
Dimensions (rack) • 9.256 in (23.5 cm) high without rack bezel; 10.3 in (26.2 cm) high
with rack bezel
• 17.6 in (44.7 cm) wide
• 19.2 in (48.7 cm) deep
Hard drive cage • One removable fixed hard drive cage that can accept up to 6 tool-
less cabled 3.5-in x 1-in hard drives.
NOTE: An optional SCSI or SAS/SATA hot swap backplane hard
drive cage (capable of handling up to 6 SCSI, SATA or SAS
hot-swappable hard drives) can be purchased to replace the
fixed hard drive cage.
Peripherals
Front panel
Front Panel LEDs and
displays
• Two tool-less 5.25-in device drive bays for CD-ROM, DVD-ROM
drive, or tape drive
• One for the DP/WS/BRP chassis configurations.
• NIC1 Activity
• NIC2 Activity
• Power / Sleep
• Hard Drive Activity
• System Status
• NMI
Power Supply Wattage of power supply is dependent on configuration of server
Fans • One 120-mm system fan
2 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
NOTE:
chassis purchased:
• UP - ships with a 420-W PFC tool-less fixed power supply
• DP - ships with a 550-W PFC tool-less fixed power supply
• WS - ships with a 670-W PFC tool-less fixed power supply
• BRP - ships with a 650-W PFC redundant power supply module
in a 1+0 configuration. An additional module can be purchased
as an accessory to create a 1+1 configuration.
• One power supply fan
1
• Processor fans for active thermal solution
• Fan with optional hot swap drive kit upgrade
• Fixed hard drive fan with WS chassis configuration
Table 2. Server Chassis Features
Feature Description
USB • Two front panel USB ports
NOTES:
1. Power supply fan integrated into power supply module.
Component Identification
Front View Components
A
Server Chassis Features
B
C
D
E
TP02345
A. 5.25-in Device Drive Bays
B. Front Panel
C. Drive Bay Access Door
D. Door Lock
E. Front Panel USB Ports
Figure 2. Front View Components (with Front Bezel Assembly)
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 3
Server Chassis Features
2
A
B
C
D
E
TP0088
A. 5.25-in Device Drive Bays
B. 3.5-in Device Drive Bay
C. Hard Drive Cage
D. Drive Bay EMI Shield (shown open)
E. Front Panel USB Ports
Figure 3. Front View Components (without Front Bezel Assembly)
4 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Internal Components
Server Chassis Features
A
L
B
C
K
D
E
J
F
G
I H
TP02033
A. Tool-less Device Bay Locks
B. 5.25-in Device Bays
C. 3.5-in Device Bay
D. Drive Bay EMI Shield
E. Drive Cage Retention Mechanism
F. PCI Add-in Card Guide
G. Front Panel USB Ports
H. Fixed Hard Drive Cage
I. Large Processor Air Duct
J. Rear Tool-less PCI Retention Mechanisms
K. Fan Duct / System Fan Assembly
L. Power Supply
Figure 4. Internal Components (DP/WS/BRP Configuration)
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 5
Server Chassis Features
A
K
B
C
J
D
E
I
F
G
J
A. Tool-less Device Bay Locks
B. 5.25-in Device Bays
C. 3.5-in Device Bay
D. Drive Bay EMI Shield
E. Drive Cage Retention Mechanism
F. PCI Add-in Card Guide
G. Front Panel USB Ports
H. Fixed Hard Drive Cage
I. Rear Tool-less PCI Retention Mechanisms
J. System Fan
K. Power Supply
H
AF002470
Figure 5. Internal Components (UP Configuration)
6 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Back Panel Components
Server Chassis Features
A
B
C
D
E
F
G
H
I
J
TP00880
A. Power Supply
NOTE: Fixed Power Supply shown. Your Power Supply may
vary depending on chassis configuration purchased
B. A/C Power In
NOTE: Fixed Power Supply shown. Your Power Supply may
vary depending on chassis configuration purchased.
C. Alternate external SCSI knockout
D. System Fan
E. I/O Shield
NOTE: I/O connectors vary, depending on the server board
installed. See your server board documentation for
port identification
F. Alternate Serial B port knockout
G. PCI Add-in Card slots
H. PCI Tool-less Card Retention Mechanisms
I. External SCSI knockout
J. Serial B port knockout
Figure 6. Back Panel Components
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 7
Server Chassis Features
Front Panel
A
B
C
D
E
F
G
H
TP02346
Callout Feature
A. Power/Sleep LED Continuous green light indicates the system has power applied to it.
B. Power/Sleep LED Powers the system off or on.
C. NMI Button Used to force system halt and dump memory contents to screen or file.
D. Reset Button Reboots and initializes the system.
E.
F.
G. Hard Drive Activity
H. Status LED Solid green indicates system ready (not supported by all server boards).
NOTES:
1. LED status may vary depending on server board integrated.
NIC 1 Activity LED
NIC 2 Activity LED
LED
1,2
Continuous amber light indicates the system is in S1 Sleep state.
No light indicates the power is off / or the system is in S4 Sleep state.
Continuous green light indicates a link between system and network.
Blinking green light indicates network activity.
No light indicates the NIC is disconnected.
Random blinking green light indicates hard drive activity (SCSI or SAS/
SATA).
Continous amber light indicates a hard drive fault.
No light indicates no hard disk drive activity.
Blinking green indicates processor or memory disabled.
Solid amber indicates a critical temperature or voltage fault, or a missing
CPU/terminator.
Blinking amber indicates a power fault, fan fault, or a non-critical
temperature or voltage fault.
No light indicates a fatal error during POST.
Function
8 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Figure 7. Front Panel Components
Peripheral Devices
The server chassis provides locations and hardware for installing hard drives, a floppy
drive, a CD-ROM drive, a DVD-ROM drive or a tape drive. The drives must be purchased
separately. The following figure shows the available options.
Server Chassis Features
A
TP02032
NOTE: It is recommended that screws be used to secure large devices if shipping chassis
integrated.
Figure 8. Optional Peripheral Devices (DP/WS/BRP configuration shown)
Hard Disk Drives
The server chassis ships with one fixed hard drive cage capable of supporting up to six
cabled 3.5-in x 1-in hard drives. Power requirements for each individual hard drive may
limit the maximum number of drives that can be integrated into the server chassis.
An optional hot-swap SCSI or SAS/SATA backplane hard drive cage (capable of handling
up to six hot-swappable SCSI, SATA or SAS hard drives) may be purchased to replace the
fixed hard drive cage. See Table 3 for order code information.
For instructions on installing hard drives, see “Installing and Removing a Fixed Hard
Drive”.
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 9
Server Chassis Features
Note: Drives can consume up to 18.4 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45C.
®
Note: The Intel
drives. See “Additional Information and Software” for an web link to a list of supported
hardware.
Entry Server Chassis SC5299-E does not support all SCSI or Serial ATA hard
Front Bezel Assembly
The front bezel assembly provides a snap-on design that allows for maximum airflow
through the server chassis.
All configurations of the server chassis ship with a two-piece front bezel assembly.
Rack-Mounted Systems
Your I nt el® Entry Server Chassis SC5299-E can be optionally mounted into a rack.
Instructions for installing your chassis into a rack are included with the rail kit.
The order number for the rack mounting kit is APP3RACKIT.
10 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Mechanical Locks
All configurations of the server chassis can support the installation of a padlock loop (see
letter “A” in the following figure) at the rear of the chassis. Additionally, the server
chassis ships with a two-position mechanical lock (see letter “B”) on the front bezel
assembly to prevent access to the hard drives and the interior of the chassis.
A
Server Chassis Features
B
Figure 9. Mechanical Locks
Accessories and Order Codes
For a complete list of spares and accessories available for your chassis, see:
http://support.intel.com/go/serverbuilder
Table 3. Accessories and Order Codes
Accessory Order Code
SAS/SATA Hot Swap Drive Bay Upgrade Kit AXX6SASDB
SCSI Hot Swap Drive Bay Upgrade Kit AXX6SCSIDB
Hot Swap Conversion Kit APP3HSDBKIT
Rack Mount Kit APP3RACKIT
AF000308
Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide 11
Server Chassis Features
12 Intel® Entry Server Chassis SC5299-E UP/DP/WS/BRP User Guide
Loading...