Intel S5000VSASCSIR, S5000VSA, SC5299-E Configuration Manual

Intel®
Server Board S5000VSA ,
Intel®
Entry Server Chassis SC5299-E,
Spares / Parts List and Configuration Guide
A reference guide to help customers order the necessary components to configure the Intel® Server Board S5000VSA and Intel® Entry Server Chassis SC5299-E
Rev 1.05 Subject to Change
April, 2010
Change History:
05/03/06 Rev 1.00: Updated with Intel® Server Board S5000VSA production information 09/19/06 Rev 1.01: Updated with SC5299-E accessories (Slim-line CD internal floppy kit) 09/19/06 Rev 1.02: Updated with latest MM# order codes following PCN 106671-02. 08/07/07 Rev 1.03: Refresh updates. 08/07/07 Rev 1.04: Updated with latest MM# order codes. 10/04/22 Rev 1.05:Updated with latest MM# order codes.
Disclaimer
All information in this document is provided in connection with Intel® products only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual applications. Intel may make changes to specifications and product descriptions at any time, without notice.
*Other brands and names may be claimed as the property of others. Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.
All products, dates, and figures are preliminary and are subject to change without any notice. Copyright © Intel Corporation 2010.
property right. Intel products are not intended for use in medical, life saving, or life sustaining
Contents
Contents............................................................................................................ 2
Production Configurations ................................................................................ 4
Production Board and KDKs ....................................................................... 4
Production Order Codes .................................................................................. 6
Production Board Accessories.................................................................... 7
Production Chassis...................................................................................... 7
Production Chassis Accessories ................................................................ 7
Production Chassis Spares......................................................................... 8
Production Configurations
Production Board and KDKs
This section contains information you need to order the production Intel® Server Board S5000VSA and Intel® Entry Server Chassis SC5299-E.
1. The production 8-DIMM SATA boxed server board S5000VSASATAR contains the following:
One Intel® production 8-DIMM SATA baseboard SKU S5000VSASATAR
CEK spring clips  ATX I/O shield and gasket  Cables: IDE, COM2, and SATA  Resource CD-ROM with utilities, drivers, documentation, and technical
information
2. The production 4-DIMM SATA boxed server board S5000VSA4DIMMR contains the following:
One Intel® production 4-DIMM SATA baseboard SKU S5000VSA4DIMMR
CEK spring clips  ATX I/O shield and gasket  Cables: IDE, COM2, and SATA  Resource CD-ROM with utilities, drivers, documentation, and technical
information
3. The production 8-DIMM SATA w/single channel SCSI adapter card boxed board S5000VSASCSIR contains the following:
One Intel® production 8-DIMM SATA baseboard SKU S5000VSASCSIR
Single channel SCSI adapter card  CEK spring clips  ATX I/O shield and gasket  Cables: SCSI, IDE, and COM2  Resource CD-ROM with utilities, drivers, documentation, and technical
information
4. The production Intel® 8 DIMMs SAS boxed server boards S5000VSASAS contain the following:
One production Intel® 8 DIMMs SAS baseboard SKU S5000VSASAS
Four SAS ports and two SATA ports  CEK spring clips  ATX I/O shield and gasket
Cables: IDE, COM2, and SATA
Resource CD-ROM with utilities, drivers, documentation, and technical information.
5. The production Intel® Server Chassis SC5299DP SKU includes:
6. The production Intel® Server Chassis SC5299BRP SKU includes:
Non-redundant 550-W PFC power supply
One non-redundant 120 mm cooling fan
Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot-swap SAS/SATA 6-
drive bay.
Cables (one each):
Front Panel Cable (24-pin baseboard header to front panel)  USB Cable (USB header to chassis front panel)
Chassis intrusion switch assembly
Quick Start Guide
Note:
No AC power cords are included  The Intel® Entry Server Chassis SC5299DP is designed to work with boxed Intel
processors that include an active heat sink.
Redundant (1+0) 650-W PFC power supply with dual-line cord support (full redundancy requires additional 650-W module which you must purchase separately)
One non-redundant 120 mm cooling fan
Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-
drive bay.
Cables (one each):
Front Panel Cable (24-pin baseboard header to front panel)  USB Cable (USB header to chassis front panel)
Chassis intrusion switch assembly
Quick Start Guide
Note:
No AC power cords are included  The Intel® Entry Server Chassis SC5299BRP is designed to work with boxed Intel
processors that include an active heat sink.
7. Common accessories include:
Hot Swap Drive Bays (all the following drive bays require the APP3HSDBKIT bracket kit when installing in an Intel
AXX6DRVGEX P: Ex pander-based 6-drive hot swap bay that supports
SAS/SATA drives. Requires two free SAS ports from the integrated SAS controller, ROMB card, or SAS RAID card.
AXX6DRV3G: 6-drive hot-swap bay that supports SAS/SATA drives. Requires
six free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS-enabled board SKU, ROMB card, or SAS RAID card.
AXX6SCSIDB (for S5000VSA board only): 6-drive hot-swap bay that supports SCSI
drives. Requires six, free SCSI ports from add-on SCSI HBA or raid card.
®
Server Board SC5299 chassis):
S5000VSASATAR
S5000VSA4DIMMR
GbE
BSA2BBR
BSA2SASBBR
BSA2VBBR
APP3RACKIT: Rack conversion kit
Production Order Codes
Board – Production
Product Code MM # UPC Qty. Included Description
S5000VSASASR
S5000VSASCSIR
901745 00735858
196116
901741 00735858
196093
901746 00735858
196109
901744 00735858
196123
901742 00735858
196208
1
1
1
1
10
Production 8-DIMM SATA Boxed Board S5000VSASATAR with six SATA ports and Dual GbE support. Includes I/O shield, gasket, cables. and Intel Server Deployment CD.
Production 4-DIMM SATA Boxed Board S5000VSA4DIMMR with six SATA ports and Dual support. Includes I/O shield, gasket, cables, and Intel® Server Deployment CD.
Production 8-DIMM SAS Boxed Board S5000VSASASR, with four SAS port, two SATA ports, and Dual GbE support. Includes I/O shield, gasket, cables, and Intel
Production 8-DIMM SATA Boxed Board w/ Single Channel SCSI Adapter Card Bundle S5000VSASCSIR with six SATA ports and Dual GbE support. Includes I/O shield, gasket, cables, and Intel Server Deployment CD.
Production 8-DIMM SATA OEM 10-pack boards with six SATA ports and Dual GbE support.
®
Server Deployment CD.
®
®
901747 00735858
196215
901743 00735858
196222
10
10
Production 8-DIMM SAS OEM 10-pack boards with four SAS ports, two SATA ports, and Dual GbE support.
Production 4-DIMM SATA OEM 10-pack boards with six SATA ports and Dual GbE support.
Production Board Accessories
Product Code
MM #
UPC
Qty.
Description
American power cord.
959
American power cord.
SC5299BRP
877864
00735858180
1
Intel® Server Chassis SC5299BRP Base Redundant
942
American power cord.
AXX6DRV3GEXP
877235
Intel® Server Chassis SC5400/SC5299-E 6-drive hot swap with
installation guide, and SATA/SAS configuration label.
AXX6DRV3G
Intel® Server Chassis SC5400/SC5299-E 6-drive hot swap non-
e
guide, and SATA/SAS configuration label.
AXX6SCSIDB
880535
0073585816
1
(For Intel® Server Board S5000VSA only) 6-drive SCSI hot-
common installation guide, and configuration label.
ASLIO
Production Chassis
877948 00735858
180733
50
Included
50 Pack: I/O shield and gasket
SC5299DP
SC5299DPNA
SC5299BRPNA
877875 00735858180
880985 00735858182
881190 00735858182
Production Chassis Accessories
Product Code
MM #
320
344
UPC
0073585818
0283
1
1
1
Qty.
Included
1
Intel® Server Chassis SC5299DP with 550-W fixed PSU, 1 chassis fan, rackable (requires rack kit), supports up to six fixed drives, upgradeable to six hot-swap drives (SAS or SATA). Supports Intel
Same as Intel® Server Chassis SC5299DP but with North
Power with one of two 650-W redundant PSU, 1 chassis fan, rackable (requires rack kit), supports up to six fixed drives, upgradeable to six Hot-Swap drives (SAS or SATA). Supports Intel North American power cord.
Same as Intel® Server Chassis SC5299BRP but with North
®
Server Board S5000VSA. No North
®
Server Board S5000VSA. No
Description
expander SATA/SAS backplane assembly. Compatible with either SAS or SATA 3.5-inch hard drives. Includes: Board, six drive carriers, two Data cables, 6-drive bay, IPMB cable, common
877237 0073585818
0306
4764
APP3HSDBKIT
882456 0073585817
7450
1
expanded SATA/SAS supported backplane assembly. Compatibl with either SAS or SATA 3.5-inch hard drives. Includes: Board, six drive carriers, six Data cables, 6-drive bay, IPMB cable, SES cable and SGPIO cable, common installation
swap drive bay for Intel® server chassis SC5299-E. Includes: Backplane board, six drive carriers, cables, 6-drive bay,
1
Hot-swap adapter bracket for use with all Intel® Server Chassis SC5299-E and Intel® Server Chassis SC5295 (except SC5295UP) chassis.
This accessory is required when using the 6-drive SATA/SAS or SCSI hot-swap drive bay.
Loading...