EES-5718 Series
Intel® Celeron® M Micro PC
Quick Reference Guide
1st Ed – 16 September 2005
Part No. 20175718A0R
EES-5718 Series
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINTST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright © 2005 Evalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
2 EES-5718 Series Quick Reference Guide
Quick Reference Guide
Disclaimer
Evalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Evalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Evalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Evalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Evalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
A Message to the Customer
Evalue Customer Services
Each and every Evalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Evalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Evalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Evalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
EES-5718 Series Quick Reference Guide
3
EES-5718 Series
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.evalue-tech.com/
If you still cannot find the answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our dealers are well trained
and ready to give you the support you need to get the most from your Evalue’s products. In
fact, most problems reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Evalue’s engineers every business day.
We are always ready to give advice on application requirements or specific information on
the installation and operation of any of our products. Please do not hesitate to call or e-mail
us.
Headquarters
Evalue Technology Inc.
7F, 228, Lian-cheng Road,
Chung Ho City, Taipei,
Taiwan
Tel : +886-2-8226-2345
Fax : +886-2-8226-2777
http://www.evalue-tech.com
E-mail: service@evalue-tech.com
China Branch Office
Evalue Technology Shanghai Inc.
Room 909, 9F, Section B, No.900,
Yisan Road, Caohejing Hi-tech Park,
Shanghai 200233, China
Tel : +86-21-5423-4170
Fax : +86-21-5423-4171
http://www.evalue-tech.com
E-mail: service.china@evalue-tech.com
Europe Branch Office
Evalue Europe A/S
Stenholtsvej 13,
3480 Fredensborg,
Denmark
Tel : +45-7025-0310
Fax : +45-4975-5026
http://www.evalue-tech.com
E-mail: service.europe@evalue-tech.com
US Branch Office
Evalue Technology Inc.
Suite 210, 200 Tornillo Way,
Tinton Falls, NJ 07712
USA
Tel: +1-732-578-0200
Fax: +1-732-578-0250
http://www.evalue-tech.com
E-mail: service.usa@evalue-tech.com
4 EES-5718 Series Quick Reference Guide
Quick Reference Guide
Product Warranty
Evalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Evalue, or which have been subject to
misuse, abuse, accident or improper installation. Evalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Evalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Evalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU type and
speed, Evalue’s products model name, hardware & BIOS revision number, other
hardware and software used, etc.) Note anything abnormal and list any on-screen
messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any
helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material authorization)
number from your dealer. This allows us to process your good return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement Order Card
and a photocopy proof of purchase date (such as your sales receipt) in a shippable
container. A product returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your
dealer.
EES-5718 Series Quick Reference Guide
5
EES-5718 Series
Contents
1. Getting started............................................................................................................7
1.1 Safety Precautions ................................................................................................7
1.2 Packing List...........................................................................................................7
1.3 System Overview...................................................................................................8
1.3.1 Front View..........................................................................................................8
1.3.2 Rear View ..........................................................................................................8
1.4 System Specifications ...........................................................................................9
1.5 System Dimensions.............................................................................................11
2. Hardware Configuration...........................................................................................12
2.1 Jumper and Connector Setting, Driver and BIOS installing.................................13
2.2 Installing Hard Disk..............................................................................................13
2.3 Installing System Memory ...................................................................................14
2.4 Installing CompactFlash......................................................................................15
6 EES-5718 Series Quick Reference Guide
Quick Reference Guide
1. Getting started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
z 1 x Intel® Celeron® M Micro PC
z 1 x Quick Reference Guide
z 1 x CD/DVD-ROM contains the followings:
— User’s Manual (this manual in PDF file)
— Ethernet driver and utilities
— VGA drivers and utilities
— Audio drivers and utilities
z 1 x Cable set includes the followings:
— 1 x PS/2 keyboard and mouse Y cable (6P-6P-6P, Mini-DIN)
— 1 x AC/DC 50W power adapter (Optional)
(90~264V/47~63 Hz/+12V/4.16A)
EES-5718 Series Quick Reference Guide
7
EES-5718 Series
1.3 System Overview
1.3.1 Front View
1.3.2 Rear View
8 EES-5718 Series Quick Reference Guide
1.4 System Specifications
System
Quick Reference Guide
CPU
BIOS
System Chipset
I/O Chipset
System Memory
SSD
Watchdog Timer
H/W Status Monitor
Display
Audio
Ethernet
Onboard Mobile Intel® µFC-BGA 479 Celeron 600 MHz with 0K L2 Cache Optional
Celeron 600 MHz with 512K Cache or Celeron 1.0 GHz with 512K Cache
Award 512 KB Flash BIOS
Intel® RG82852GM GMCH/FW2801DB ICH4
Winbond W83627HF-AW
One 184-pin DIMM socket supports up to 1 GB DDR 200/266 SDRAM
One CompactFlash Type I/II socket
Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
Monitoring system temperature, voltage, and cooling fan status. Auto throttling control
when CPU overheats
Intel® 82852GM GMCH integrated Extreme Graphics 2 controller with 64 MB display
memory
AC97 Codec, VIA VT1616 supports 5.1 CH Audio
LAN 1: Intel® 82562ET or 82551ER 100Base-Tx Fast Ethernet controller
LAN 2: Intel® 82562ET or 82551ER 100Base-Tx; optional Intel® 82540EM 1000Base-T
Fast Ethernet controller
System Indicators
HDD Type
Expansion
External I/O Ports
COM Port
LAN Port
Audio Port
USB Port
IEEE 1394 Port
Parallel Port
Mouse & KB
Power Supply Unit
Power Input
2 LED indicators show the power and HDD
LAN status shown on the back panel
Mounting kit for one 2.5" HDD
One CardBus Type II slot
1 x RS-232, 1 x RS-232/422/485
2 x RJ-45
Mic-in, Line-in, Line-out
4 x USB 2.0
1x IEEE-1394A
1 x DB-25
1 x PS/2 mini DIN
DC-in 12 ~ 24 V, 40 W (min.)
EES-5718 Series Quick Reference Guide
9
EES-5718 Series
Environment & Mechanical
Operating Temperature
Storage Temperature
Relative Humidity
Mounting
Dimension (W x H x D)
Weight
0 to 45°C (32~113°F)
-20 to +75°C (-4~167°F)
5 to 90% @ 45°C (113°F), relative humidity, non-condensing
Desktop
9.37" x 6.3" x 2.36" (238 mm x 160 mm x 60mm)
4.4 lbs (2 Kgs)
10 EES-5718 Series Quick Reference Guide
1.5 System Dimensions
Quick Reference Guide
(Unit : mm)
EES-5718 Series Quick Reference Guide
11
EES-5718 Series
2. Hardware
Configuration
12 EES-5718 Series Quick Reference Guide
Quick Reference Guide
2.1 Jumper and Connector Setting, Driver and BIOS installing
z Please refer to ECM-5716/5718 Quick Installation Guide or User’s Manual.
Note: If you need more information, please visit our website: http://www.evalue-tech.com
2.2 Installing Hard Disk
Step 1. Unscrew two screws as indicated
and take off the chassis cover.
Step 2. Place HDD in the tray and fasten
four screws.
Step 3. Put the cover back and fasten four
screws to complete the
installation.
Note: Always power down your system
when
removing the chassis cover!
EES-5718 Series Quick Reference Guide
13
EES-5718 Series
2.3 Installing System Memory
Step 1. Unscrew five screws as
indicated and take off the
chassis cover.
Step 2. Install the SDRAM.
14 EES-5718 Series Quick Reference Guide
Note: Always power down your
system when removing the
chassis cover!
2.4 Installing CompactFlash
Quick Reference Guide
Step 1. Unscrew a screw and take off the
chassis cover as indicated.
Step 2. Install the CF card.
Step 3. Put the cover back and fasten the
screw to complete the installation.
Note: Always power down your system
when removing the chassis cover!
EES-5718 Series Quick Reference Guide
15
EES-5718 Series
16 EES-5718 Series Quick Reference Guide
Loading...