INTEL 845G, 845GL, 845GE, 845PE, 845GV User Manual

Electronic Emission NoticesElectronic Emission Notices

Electronic Emission Notices

Electronic Emission NoticesElectronic Emission Notices

Federal Communications Commission (FCC) Statement (005928)Federal Communications Commission (FCC) Statement (005928)

Federal Communications Commission (FCC) Statement (005928)

Federal Communications Commission (FCC) Statement (005928)Federal Communications Commission (FCC) Statement (005928)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions contained in this manual, may cause harmful interference to radio and television communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- REORIENT OR RELOCATE THE RECEIVING ANTENNA

- INCREASE THE SEP ARATION BETWEEN THE EQUIPMENT AND THE RECEIVER

- CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT OF THE RECEIVER

- CONSULT THE DEALER OR AN EXPERIENCED AUDIO/TELEVISION TECHNICIAN

NOTE: Connecting this device to peripheral devices that do not comply with Class B

requirements, or using an unshielded peripheral data cable, could also result in harmful interference to radio or television reception.

The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

To ensure that the use of this product does not contribute to interference, it is necessary to use shielded I/O cables.

CopyrightCopyright

While every precaution has been taken in the preparation of this manual, no responsibility for errors or omissions is assumed. Neither is any liability assumed for damages resulting from the use of the information contained herein.

TrademarksTrademarks

Trademarks

TrademarksTrademarks

All brand names, logos and registered trademarks mentioned are property of their respective owners.

able of Contentsable of Contents

able of Contents

able of Contentsable of Contents

HARDWARE CONFIGURATIONHARDWARE CONFIGURATION

HARDWARE CONFIGURATION

HARDWARE CONFIGURATIONHARDWARE CONFIGURATION

Key Features ............................................................................................................... 3

Motherboard Layout .................................................................................................... 6

Jumper Settings ........................................................................................................... 7

CPU Speed Selection ............................................................................................ 7

JP1 - System Bus Frequency(only for 845G/GE/PE/GV) .................................... 7

JP2 - CMOS Clear.................................................................................................. 7

JP5 - Keyboard Power Select .............................................................................. 7

JP6 - On Board AC97 Codec Sound .................................................................... 7

JP7 - On Board LAN (optional) ............................................................................. 7

Pin Assignment ..................................................................................................... 8

HARDWARE SETUPHARDWARE SETUP

HARDWARE SETUP

HARDWARE SETUPHARDWARE SETUP

T o Install DDR DIMMs ................................................................................................... 9

Installing a New Processor ......................................................................................... 10

To Install a Processor to ZIF Socket ........................................................................... 10

Connect the Processor Fan Connector ...................................................................... 10

Setting the Processor Speed ...................................................................................... 10

BIOS SETUPBIOS SETUP

BIOS SETUP

BIOS SETUPBIOS SETUP

Starting Setup .............................................................................................................. 11

Main Menu.................................................................................................................... 12

Standard CMOS Features ........................................................................................... 13

Advanced BIOS Features ........................................................................................... 14

Advanced Chipset Features ....................................................................................... 14

Integrated Peripherals ................................................................................................. 14

Power Management Setup.......................................................................................... 1 4

PNP/PCI Configurations................................................................................................ 14

PC Health Status.......................................................................................................... 14

Frequency/Voltage Control ......................................................................................... 1 4

Set Supervisor/User Password .................................................................................. 15

Flash Update Procedure ............................................................................................. 15

............................................................................................................................................................................

......................................................................................

............................................................................................................................................................................

....................................................................................................................................................................................................

..................................................................................................

....................................................................................................................................................................................................

........................................................................................................................................

....................................................................

........................................................................................................................................

1111

APPENDIXAPPENDIX

APPENDIX

APPENDIXAPPENDIX

USB 2.0 Driver Installation for Windows 9X ........................................................... 16

Technical Reference Booklet

........................................................................................................................................................................................................

....................................................................................................

1616

HARDHARD

HARD

HARDHARD

Key Key

Key

Key Key

ChipsetChipset

Chipset

ChipsetChipset

ProcessorProcessor

Processor

ProcessorProcessor

VRM 9.0 (VVRM 9.0 (V

VRM 9.0 (V

VRM 9.0 (VVRM 9.0 (V

CacheCache

Cache

CacheCache

System MemorySystem Memory

System Memory

System MemorySystem Memory

Note: Please ensure that your DIMMs can meet the specification of SPD.

AGP Controller (only for 845G/845GE/845PE)AGP Controller (only for 845G/845GE/845PE)

AGP Controller (only for 845G/845GE/845PE)

AGP Controller (only for 845G/845GE/845PE)AGP Controller (only for 845G/845GE/845PE)

On-board I/OOn-board I/O

On-board I/O

On-board I/OOn-board I/O

Expanded USB SupportExpanded USB Support

Expanded USB Support

Expanded USB SupportExpanded USB Support

ARE CONFIGURAARE CONFIGURA

ARE CONFIGURA

ARE CONFIGURAARE CONFIGURA

FeaturesFeatures

Features

FeaturesFeatures

• Intel® 845G/GL/GE/PE/GV Chipset.

• Supports the Intel® Pentium® 4 processors and the Northwood

• Supports PSB (Processor System Bus) frequency of 400MHz

• Supports PSB (Processor System Bus) frequency of 533MHz

• Flexible motherboard design with on board VRM 9.0, easy to upgrade with

• The Intel® Pentium® 4 and Northwood processors built-in L2 Cache.

• Up to 2.0 Gbytes of 200MHz or 266MHz DDR SDRAM.

• Supports up to two DDR DIMMs, single-sided or double-sided.

• Supports DDR200/266 unregistered, 184-pin non-ECC DDR SDRAM DIMMs.

• Does not support double-sided x16 DDR DIMMs.

• Up to 2.0 Gbytes of 333MHz DDR SDRAM (only for 845GE/PE/GV).

• Supports AGP2.0 including 1x/2x/4x AGP data transfers and 2x/4x Fast Write

• AGP 1.5V connector support only, No support for 3.3V or Universal AGP

• High priority access support.

• Delayed transaction support for AGP reads that cannot be serviced

• On board two PCI fast IDE ports supporting up to 4 ATA, ATA2 , Ultra ATA33/

• One ECP/EPP parallel port.

• Two 16550 Compatible UART serial ports.

• One floppy port supports two FDD of 360KB, 720KB, 1.2MB , 1.44MB and

• PS/2 keyboard connector.

• PS/2 mouse is supported.

• One front panel sound connector.

• Infrared (IrDA) is supported via a header.

• Includes 3 UHCI host controllers,increasing the number of external ports to six.

• Includes 1 EHCI USB2.0 Host Controller that supports all six ports (Bandwidth

: :

processors in the 478-pin package. (100MHz bus clock). (133MHz bus clock) (only for 845G,845GE,845PE,845GV).

oltage Roltage R

oltage R

oltage Roltage R

future Intel® Pentium® 4 and Northwood processors.

protocol. connectors.

immediately.

66/100 IDE HDDs, CD-ROMs, ZIP drives and LS-120 drives as boot drive.

2.88MB capacity.

shared between six ports).

egulator Modules) on Boardegulator Modules) on Board

egulator Modules) on Board

egulator Modules) on Boardegulator Modules) on Board

TIONTION

TION

TIONTION

Hardware Configuration

On-board VGA (only for 845G/845GE/845GL/845GV)On-board VGA (only for 845G/845GE/845GL/845GV)

On-board VGA (only for 845G/845GE/845GL/845GV)

On-board VGA (only for 845G/845GE/845GL/845GV)On-board VGA (only for 845G/845GE/845GL/845GV)

• Core Frequency of 200MHz.

• 3D Setup Render Engine.

• High Quality Texture Engine.

• 3D Graphics Rasterization Enhancements.

• Full 2D H/W Acceleration.

• Motion Video Acceleration.

• Up to 1600x1200 in 8 bit Color at 85MHz Refresh.

• H/W Motion Compensation Assistance for S/W MPEG2 Decode.

• Software DVD at 30fps.

• Integrated 24-bit 230MHz RAMDAC.

System BIOSSystem BIOS

System BIOS

System BIOSSystem BIOS

• PnP, APM, ATAPI and Windows 95/98/2000.

• Full support of ACPI & DMI.

• Auto detects and supports LBA harddisks with capacities over 8.4GB.

• Easy to upgrade BIOS by end-user.

Plug and PlayPlug and Play

Plug and Play

Plug and PlayPlug and Play

• Supports Plug and Play specification 1.1.

• Plug and play for DOS, Windows 3.X, Windows 95/98/2000, as well as

Windows XP.

• Fully steerable PCI interrupts.

Power ManagementPower Management

Power Management

Power ManagementPower Management

• Supports SMM, APM and ACPI.

• Break switch for instant suspend/resume on system operations.

• Energy star “Green PC” compliant.

• Hardware monitoring circuit is supported, provide voltage, fan speed, etc. monitoring (optional).

• WOL (Wake-On-Lan) Header support.

• External Modem Ring-in Wake-up support.

• Supports suspend-to-RAM(STR)(optional).

On-board AC97 SoundOn-board AC97 Sound

On-board AC97 Sound

On-board AC97 SoundOn-board AC97 Sound

• Integrated AC97 controller with standard AC97 Codec.

• Direct Sound and Sound Blaster compatible.

• Full-Duplex 16-bit record and play back.

• PnP and APM 1.2 support.

• Win® 95/98/2000/XP, NT drivers ready.

• Line-in, Line-out, Mic-in and MIDI/Game port.

• Supports ALC650 AC97 Code for six sound channel output (optional).

On-board Realtek RTL8100BL PCI LAN (optional)On-board Realtek RTL8100BL PCI LAN (optional)

On-board Realtek RTL8100BL PCI LAN (optional)

On-board Realtek RTL8100BL PCI LAN (optional)On-board Realtek RTL8100BL PCI LAN (optional)

• Provides 32-bit performance, PCI bus master capability.

• Full compliance with IEEE 802.3u 100 Base-T specifications and IEEE 802.3X

Full Duplex Flow Control.

• Supports 10 Mb/s and 100 Mb/s operation.

• Supports Wake-On-LAN function and remote wake-up.

• Supports ACPI, PCI Power management and PCI VPD.

Technical Reference Booklet

Expansion SlotsExpansion Slots

Expansion Slots

Expansion SlotsExpansion Slots

• 1 AGP slot (845GL/GV supports ADD card only, 845G/GE/PE supports ADD card)(optional).

• 3 PCI bus master slots - ver. 2.1 compliant.

CAUTION

Static electricity can harm delicate components of the motherboard. To prevent damage caused by static electricity, discharge the static electricity from your body before you touch any of the computers electronic components.

Hardware Configuration

+ 11 hidden pages