Intek MT-446A Instruction Manual

INSTRUCTION MANUAL
MANUALE DI ISTRUZIONI
PROFESSIONAL 2-WAY RADIO
PC PROGRAMMABLE
PMR 446 / 16CH
Declaration of Conformity
NOTICE !
It is recommended to carefully read this owner’s manual before using the product. This will also help the user to prevent using the radio in violation of the regulations valid in the country where the product is used, as well as to avoid any possible interferences with other services.
RoHS
2002/95/EC
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking and checking parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preliminary Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Getting acquainted with the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Advanced functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Frequency/Channels programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Index - Notice
- 1 -
NOTICE !
This transceiver is programmable via PC, using the dedicated software (free download at www.intek-radios.com) and the PC interface cable (optional item). Any programming or
modification of the original default setting must be made by a specialised technician or by an authorised service centre. Some functions of this transceiver might be programmed in violation of the technical rules in force for the use of the PMR-446 band. It is the user’s responsibility to check that any modification to the programming will be done in compliance with the current regulations. Any modification to the product, alteration of the internal circuit, of the external structure of the radio or any programming in violation of the current regulations will automatically void the product certification and your right to use the product. INTEK S.R.L. declines any responsibility concerning any modification of the product, made by the user or by a third party, after delivery of the product.
NOTICE !
This transceiver has been factory programmed, in order to use the product immediately after purchase. The programming includes the activation of channels/frequencies in the PMR-446 band, according to the technical rules in force for the use of this band. Please refer to the table at page 12 for details.
English
Thank you !
Thank you for choosing INTEK for your two-way business radios applications. This user friendly transceiver will provide you with clear and reliable communications and will keep your professional activities at peak efficiency. This transceiver incorporates the latest and most advanced technology, so you will be pleased with its quality and its technical features.
Important notice !
The use of PMR-446 transceivers is subject to the regulations applied in the country where the product has to be used. As regulations are usually subject to possible modifications, please check the current regulations in your country with your dealer or local supplier. INTEK does not take any responsibility for illegal use and operation of this product not in accordance with the regulation of the country where the product is used.
Safety notice
The user must know and understand the common risks related to the use of transceivers. Do not use the transceiver in environments at risk of explosion (where there are gas, dusts, smokes, etc.). Do not use the transceiver in service areas or fuel stations, on board aircrafts, etc.
Cautions
Please observe the following precautions, in order to avoid causing fire, personal injuries or damage to the radio:
It is suggested that each transmitted message lasts a few minutes only, since very long transmissions at the maximum transmitter RF output power may overheat the transmitter.
Do not alter or modify in any way your transceiver.
Do not expose the transceiver for a long time to direct sunlight and do not place it close to heat sources.
Do not expose the transceiver to excessively dusty or damp places, do not place it on unstable surfaces.
In case of anomalous smell or smoke that leaks out from the transceiver, turn it off immediately and remove the battery pack. Please contact an authorised service center.
Please do not dispose off used battery with common garbage. Please use the dedicated disposal containers.
- 2 -
General Information
English
Unpacking and Checking Parts - Supplied Accessories
- 3 -
Unpacking and checking parts
Carefully unpack the product. Please identify all the parts listed below, before wasting the packaging. If any part is missing or if the packaging shows any damage, please contact your dealer immediately.
Supplied accessories
7.4V 1500mAh Li-Ion Rechargeable Battery Pack
Electronic Quick Desk Charger
Belt Clip
Handstrap
User Manual
Electronic Quick Desk Charger Li-Ion Battery Pack
Belt Clip Handstrap User Manual
English
Preliminary Steps
- 4 -
Battery charging
Connect the 230VAC adaptor charger to the desk type battery charger and to a 230VAC outlet. The Green Led will light to confirm that the charger is powered. Switch ON the radio and check (within 5 seconds) the battery level on Battery Level Indicator (8); 4 bars mean full charge and no lighted bars mean that battery needs to be immediately recharged. Insert the empty battery or the transceiver with the battery pack in the battery charger. Please make sure that the charging contacts of the radio are connected with the charging contacts of the charger cradle. The Led will light in Red color then the device is ready to begin the charging process. The charging time depends on the battery condition and capacity (about 5 hours). During charging process, the Led will light in orange color gradually. When the charging process has finished, the Led lights in green color. Remove the battery pack or the transceiver from the battery charger and disconnect it from the AC outlet.
Charger LED Indicator
Warning !
The battery is supplied empty and it has to be fully recharged before use.
Make sure that the radio is switched OFF during charging process.
Some complete cycles of charge/discharge will be necessary in order for the battery to reach a peak efficiency level.
Please do not charge the battery again when it has just been charged. Otherwise, you may damage the battery or reduce its life.
The battery charger does not switch OFF automatically when charging is complete, therefore please remove battery or radio from the charger cradle and disconnect it from the AC outlet.
Do not recharge battery for more than 8 hours, in order to avoid battery overheating. When the temperature is too high (over 60°C), charging stops and charger's LED will light in yellow color. Try to recharge the battery when the temperature drops.
English
Charger Status LED Indicator Remarks
Power ON / Standby Green light
Charging Mode Red light and Orange light gradually
during charging process
Full Charging Green light
Battery Fault LED OFF
High temperature Yellow light
Battery pack is damaged
When the battery capacity is using out, the radio will keep reporting "Please charge the battery" every 10 seconds.
To install the battery
Please match battery pack with the corresponding guides on the back side of the transceiver.
Slide and press the battery downward untill the locker placed on the base of the radio locks the battery.
To remove the battery
To remove the battery, press the battery locker [1] placed on the base of the radio and get the battery away [2] from the radio.
Warning !
Please do not waste used batteries into the environment and do not trash them with the common garbage. Please use the dedicated case for the collection of used up batteries at your supplier.
Do not attempt to open or remove the battery casing.
Do not short the battery terminals or throw the used batteries into fire.
To install / to remove the belt clip
If necessary, attach the belt clip to the back side of the tranceiver, by fixing it with the two supplied screws.
To remove the belt clip, release the screws.
Preliminary Steps
- 5 -
English
Preliminary Steps
- 6 -
To install the external microphone (optional)
To install the external microphone, remove the protection cover of the external microphone/speaker jack. This cover ensures the watertight integrity of the transceiver (spray­guard) that will not be ensured after its removing.
Insert the connector of the external microphone into the right jack.
In order to avoid mulfunction or damage to the transceiver, use only original microphones. Using non original accessories will authomatically void the warranty.
Warning !
If an external earset-microphone is used, radio will not be splash proof.
WARNING ! THE RUBBER FLEXIBLE ANTENNA IS FIXED AND NOT REMOVABLE. DO NOT TRY TO TURN OR REMOVE IT, OTHERWISE ANTENNA MAY BE BROKEN.
English
- 7 -
Getting Acquainted with the Product
GETTING ACQUAINTED WITH THE PRODUCT
1. Antenna
Fixed non removable rubber flexible antenna.
2. Channel Selector
Turn the selector to select the desired channel from 1 to 16.
3. Power ON switch and volume control
Switch on the transceiver turning the knob clockwise or counterclockwise to switch it off. To increase the volume, turn the knob clockwise or counterclockwise to decrease it.
4. LED Indicator
The LED indicator will light in green colour when the radio is receiving a signal and in red colour during transmission.
5. PTT key (Push-To-Talk)
To transmit, press and keep pressed the PTT key (5), then speak into the microphone with your normal voice. To receive release the PTT key (5).
6. SIDE Key 1
This key is programmable by using dedicated software (free download at www.intek-radios.com). The default setting is the MONITOR function (see page 10).
7. SIDE Key 2
This key is programmable by using dedicated software (free download at www.intek-radios.com). The default setting is the MONITOR function (see page 10).
2
3
1
4
5 6
7
10
8
9
11
12
English
Loading...
+ 19 hidden pages