Integra EPRO-RACK 1.1KVA, EPRO-RACK 2.25KVA, EPRO-RACK 1.7K, EPRO-RACK 3.4KVA User Manual
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 1
ENGLISH
USER MANUAL
EPRO-RACK 1.1K – 3.4KVA
ONLINE DOUBLE CONVERSION UPS
User Manual:
• 220V (Europe: «Schuko» Zone)
• 110V (America: «NEMA» Zone)
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 2
DO NOT connect laser printers, scanners, or copiers to this UPS.
High power devices may damage this UPS
.
1. SAFETY AND USE:
WARNING: This product has been designed to operate safely and reliably for years. Nevertheless, as it is an
electrical device, it is required to read and understand this manual. Keep manuals as references for future consults.
WARNING: This product has been designed to be used indoors, protected of water, direct sun light and extreme
temperatures. This device must not be used outdoors, close to moisture of heat sources.
WARNING: Do not set objects on this UPS. Handle with care. Do not block UPS ventilation.
WARNING: Make sure to connect this unit to proper power line according to selected model. The UPS Technical
Specs sticker shows power rating information. DO NOT connect this UPS to any of its own power outlets.
WARNING: UPS must be installed following instruction from this manual.
The manufacturer is not liable for any damage that might rise from misusing this unit or defective installation.
WARNING: Only computer related equipment can be connected to this UPS. DO NOT connect medical
equipments, life support equipments, microwave ovens, vacuum cleaners, refrigerators, or any other appliance to
this UPS.
WARNING: UPS must be checked, repaired and maintained by qualified personnel only. This product is locked by
screws.
WARNING – ELECTRIC SHOCK RISK:
Inside the UPS there are dangerous high voltages even when disconnected of power line, due to internal batteries
WARNING: In case of emergency turn off the UPS pressing Power Button, unplug it and call technical support.
Disposal
We strongly recommend disposing this UPS according to regulations in your country to prevent
possible environmental damages; besides some parts might be recycled.
BATTERY WARNING: DO NOT dispose batteries in fire as it might explode. DO NOT try to open
batteries, there are dangerous liquids inside.
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 3
SAFETY STANDARDS
EPRO & EPRO-RACK 1.1KVA - 1.7KVA
Low Voltage Directive:
EN62040-1-1:2003 An Uninterruptible Power Systems (UPS) Part 1-1: General and Safety Requirement for UPS
use operator access areas
EMC Directives:
EN62040-2: 2006 An Uninterruptible Power Systems (UPS) Part 2: Electromagnetic compatibility Class 2 (EMC)
IEC 61000-4-2: 2001 Electrostatic discharge immunity test
IEC 61000-4-3: 2006 Radiated radio frequency electromagnetic field immunity test
IEC 61000-4-4: 2004 Electrical fast transients/Burst immunity test
IEC 61000-4-5: 2005 Surge immunity test
IEC 61000-2-2: 2002 Compatibility levels for low frequency conducted disturbances and signaling in public low
voltage power supply systems
EN 61000-4-6: 2006
EN 61000-4-8: 2001
EN 61000-4-11: 2004
EPRO & EPRO-RACK 2.25KVA – 3.4KVA
Low Voltage Directive:
EN62040-1-1:2003 An Uninterruptible Power Systems (UPS) Part 1-1: General and Safety Requirement for UPS
use operator access areas
EMC Directives:
EN62040-2: 2006 An Uninterruptible Power Systems (UPS) Part 2: Electromagnetic compatibility Class 2 (EMC)
IEC 61000-4-2: 2001 Electrostatic discharge immunity test
IEC 61000-4-3: 2006 Radiated radio frequency electromagnetic field immunity test
IEC 61000-4-4: 2004 Electrical fast transients/Burst immunity test
IEC 61000-4-5: 2005 Surge immunity test
IEC 61000-2-2: 2002 Compatibility levels for low frequency conducted disturbances and signaling in public low
voltage power supply systems
EN 61000-4-6: 2006
EN 61000-4-8: 2001
EN 61000-4-11: 2004
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 4
2.A- PRODUCT DESCRIPTION – REAR PANEL: 220V (EUROPE SCHUKO Outlets)
1. Programmable Outlets
2. Standard Outlets
3. AC Input
4. Input Breaker
5. Protected LAN network jacks
6. “EPO”: “Emergency Power Off”.
7. USB port
8. RS-232 port
9. Intelligent Slot for “SNMP” LAN cards
10. Connector for External batteries (EX
models).
EPRO-RACK 1.1KVA / 1.7K / 2.25KVA
EPRO-RACK 3.4KVA
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 5
2.B- PRODUCT DESCRIPTION – REAR PANEL: 120V (AMERICA – NEMA Outlets)
1. Programmable Outlets
2. Standard Outlets
3. AC Input
4. Input Breaker
5. Protected LAN network jacks
6. “EPO”: “Emergency Power Off”.
7. USB port
8. RS-232 port
9. Intelligent Slot for “SNMP” LAN cards
10. Connector for External batteries (EX
models)
11. Output Breakers.
EPRO-RACK 1.1KVA / 1.7KVA
EPRO-RACK 2.25KVA
EPRO-RACK 3.4KVA
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 6
FRONT PANEL: PUSH BUTTON FUNCTIONS
“ON / MUTE”
a) POWER ON: Keep selected during 2 seconds or longer.
b) BEEP MUTE: In battery mode: Keep selected during 5 seconds or longer to Mute acoustic alarm beep.
Some alarms cannot be muted as Bypass Warning or ERROR alarms.
c) AUTO-TEST: In normal mode: Keep selected during 5 seconds or longer to activate Auot-Test
function.
“OFF / ENTER”
a) POWER OFF UPSAPAGADO DEL UPS: Keep selected during 2 seconds to power off UPS
b) ENTER: Enter function works under configuration mode only. It works as confirmation or selection key
for accepting current option on LCD.
“SELECT”
a) TO SHOW UPS PARAMETERS AND VALUES: It is used to show on LCD UPS input and output
values as AC Input, DC battery voltage, Input Frequency, UPS output, output frequency, etc.
b) TO ACTIVATE CONFIGURATION: Keep selected during 5 seconds or longer
“ON / MUTE” + “SELECT”
TO ACTIVATE BY-PASS MODE: Under normal mode, by selecting these 2 keys at the same time
during 5 seconds or longer UPS changes from normal mode to bypass mode.
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 7
3. INSTALATION
3.1.- INTERNAL BATTERIES CONNECTION BEFORE INSTALLING
Before installing this product internal batteries must be connected. This product is delivered with internal batteries
disconnected to avoid battery damage during long storage times.
Paso 1: Open and remove front cover
Paso 2: Connect internal batteries to the UPS
Paso 3: Close front panel
USER MANUAL
EPRO RACK 1.1K-3.4K
____________________________________________________________________________________________
(120217_ENG) Integra EPRO RACK 1.1K-3.4K - 8
3.2.- RACK UPS INSTALLATION
Rack UPS must be installed using L-Shape type guides for supporting UPS weight. Usually this kind of supports is
provided with rack cabinets. If not, INTEGRA can provide telescopic guides as optional accessory.
Small black handles included with the UPS are only for locking purposes. UPS cannot be supported only by these
handles.
- Figure 1: Rack cabinet must include L-shape guide to support UPS.
- Figure 2: UPS must be installed on L-shape guides.
- Figure 3: Handles included with UPS are only for locking UPS to the cabinet but not for supporting
UPS weight.
- Figure 4: INTEGRA offers telescopic guides as optional accessory if it is required.
Figure 1:
Figure 2:
Figure 3:
Figure 4:
Loading...