Cursor Readout Analog Oscilloscope
GOS-6112/6103/6103C (100 MHz)
SPECIFICATIONS
CRT
VERTICAL
SYSTEM
HORIZONTAL
SYSTEM
TRIGGER
X-Y OPERATION
OUTPUT SIGNAL
Type
Accelerating Potential
Illumination
Z-axis input
Sensitivity
Sensitivity Accuracy
Vernier Vertical Sensitivity
Bandwidth(-3dB)
Rise Time
Signal Delay
Max. Input Voltage
Input Coupling
Input Impedance
Vertical Mode
Bandwidth Limited
Common-Mode Rejection Ratio
Dynamic Range
Horizontal Modes
A(main) Sweep Time
B(delay) Sweep Time
Accuracy
Sweep Magnification
Hold Off Time
Delay Time
Delay Jitter
Alternate Separation
Trigger Modes
Trigger Source
Trigger Coupling
Trigger Slope
Trigger Sensitivity
TV sync
Max. External Input Voltage
External Input Impedance
Mode
Sensitivity Accuracy
X-axis Bandwidth
Phase Error
Trigger Signal Output
Calibrator Output
FEATURES
* 100MHz Bandwidth, Dual Channel, Delayed Sweep
* Built-In 6 Digit Universal Counter (GOS-6103C)
* 10 Sets Memory for Front Panel Setting Save & Recall
(GOS-6103/GOS-6103C)
* Time Base Auto-range (GOS-6103/GOS-6103C)
* Cursor Readout with 7 Measurements
* Panel Setup Lock of Digital-Control Functions
* Buzzer Alarm
* LED Indicators
* TV Synchronization
* Trigger Signal Output
* Z-Axis Modulation Input
* SMD Technology, High Stability and Reliability
6-inch rectangular type with internal graticule;
8x10div(1 =1cm)div
16 kV approx. (GOS-6103/GOS-6103C), 12kV approx. (GOS-6112)
Continuously adjustable (GOS-6103/GOS-6103C)
Coupling : DC
Sensitivity: 5V or more
Maximum input voltage : 30V (DC + AC peak) at 1kHz or less
Bandwidth : DC~5MHz
2mV~5V/ , 11 step in 1-2-5 sequencediv
_
<
3% (5 at the center of display)div
Continuously variable to 1/2.5 or less of panel-indicate value
DC~100MHz(2mV/ :DC~20MHz)div
3.5ns (2mV/ :17.5ns)div
Leading edge can be monitored
400V(DC+AC ) at 1kHz or lesspeak
AC, DC, GND
_
+
1M 2% // approx. 25pF
CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV.
20MHz
50:1 or better at 50kHz
8 at 60MHz; 5 at 100MHz (GOS-6112)div div
8 at 100MHz (GOS-6103/GOS-6103C)div
MAIN(A), ALT, DELAY(B)
50ns~0.5s/ , continuously variable (UNCAL)div
50ns~50ms/div
_
_
+
+
3% ( 5% at x 10 MAG)
x 10 (maximum sweep time 5nS/ )div
Variable
1 s~5s
Better than 1:20000
Variable
AUTO, NORM,TV
CH1,CH2,LINE,EXT
AC,DC,HFR,LFR
"+" or "-" polarity or TVsync polarity
Mode Frequency
AUTO
NORM
TV
TV-V, TV-H
400V(DC+AC ) at 1kHz
_
+
1M 5% // approx.25pF
W
X-axis: selectable CH1, CH2, EXT ; Y-axis: selectable CH1, CH2, CH1 and CH2
2mV~5V/ 3% ; EXT : 0.1V/ 5%div div
DC~500kHz(-3dB)
3 or less from DC~50kHz
Voltage: approx. 25mV/ into 50div
1kHz Square wave, 2Vpp 2%
10Hz~20MHz
20 MHz ~ 100 MHz
DC~20MHz
20 MHz ~ 100 MHz
sync signal
peak
_
+
_
+
_
+
; Frequency response : DC ~ 10MHz
0%, 10%, 90% and 100% markers.
INT
0.35 div
1.5 div
0.35 div
1.5 div
1 div
EXT
50 mV
150 mV
50 mV
150 mV
200 mV
pp
Cursor Readout Analog Oscilloscope
A1
CURSOR
READOUT
FUNCTION
AUTO
MEASUREMENT
FUNCTION
(GOS-6103C)
SPECIAL
FUNCTION
POWER SOURCE
ACCESSORIES
DIMENSIONS & WEIGHT
GOS-6112
Cursor Measurement Function
Cursor Resolution
Effective Cursor Range
Panel Setting Display
Parameter Function
Display Digits
Frequency Range
Accuracy
Measuring Sensitivity
TIME/DIV Auto Range
Panel Setting Save & Recall
Panel Setups Lock
CURSOR MEASUREMENT FUNCTIONS
GOS-6103/6103C
SPECIFICATIONS
V, V%, VdB, T, 1/ T, T%,
1/100 DIV
_
+
Vertical: 3div ; Horizontal: 4 div
Vertical: V/ (CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GNDdiv
Horizontal: s/ (MTB, DTB), UNCAL, x 10MAG, delay time , HOdiv
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y, lock, save/recall MEM 0-9 (GOS-6103/GOS-6103C)
_
FREQ, PERIOD, WIDTH, DUTY (+ or - polarity selected by trigger slope)
Max. 6-digits, decimal
50Hz ~ 100MHz
1kHz ~ 100MHz : 0.01% ; 50Hz ~ 1kHz : 0.05%
> 2 div (Measuring source selected from CH1 and C 2 as synchronous signal sources)H
Provided (GOS-6103/GOS-6103C)
10 sets (GOS-6103/GOS-6103C)
Provided
AC 100V/120V/230V 10% , 50/60Hz
Instruction manual x 1; Power cord x 1;
310(W) x 150(H) x 455(D) mm ; Approx. 9kg
+
_
+
_
+
_
+
_
+
_
+
LF-210E Probe (10:1/1:1) x 2
The unique easy-to-use cursor and numerical
readouts make waveform observation and
measurement easier, faster and more accurate.
The on screen cursors provide seven
measurement functions ( V, V%, VdB, T,
1/ T,T%, )
GOS-6112
GOS-6103
GOS-6103C
100MHz, 2-channel, Analog Oscilloscope
100MHz, 2-channel, Analog Oscilloscope
100MHz, 2-channel, Analog Oscilloscope
with 100MHz Frequency Counter
NOTE : GOS-6103C Without Approved
Voltage Measurement
Frequency Measurement
Voltage percentage Measurement
Time percentage Measurement
ORDERING INFORMATION
Option
Opt.01:
Opt.02:
GTC-001 Instrument Cart, 450(W) x 430(D) mm
GTC-002 Instrument Cart, 330(W) x 430(D) mm
Time Measurement
Phase Measurement
Loading...