
英文
Special statement:
All contents in this document have been checked carefully. Instant
Pot Company reserves the right to interpret any printing mistake or
misunderstanding of content.
For any technical improvement or change in appearance or name
plate, changes shall be placed in the revised manual without further
notice. In case of changes in appearance and color, please refer to
the actual product for detailed information.
UL 1026, Fifth Edition
CAN/CSA-C22.2 No. 1335.1-93
CAN/CSA-C22.2 No.1335.2.15-93
Programmable Pressure Cooker
IP-CSG50
IP-CSG60
Program Functions
Timer Function
Meat/Ste
Beam/Chili
Manual
www.InstantPot.com
Short | Normal | Longer
Adjust
Slow Cook
Multigrain
Steam
User Manual
Instant Pot
09
10
11
12
13
14
14
Instant Pot Company
Address: 11 – 300 Earl Grey Dr., Suite 383
Telephone: +1 800 828-7280
Web: http://www.InstantPot.com
E-mail:
© 2011 Instant Pot Company, All Rights Reserved.
Ottawa, Ontario
Canada K2T 1C1
Inquire@instantpot.com
15
16
Thank you for purchasing the multi-functional Instant Pot.Please read the User Manual carefully before use and keep it in a
safe place.
Special Cord Set Instructions
A short power supply cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
An extension cord may be purchased and used if care is exercised in its use.
If an extension cord is used the marked electrical rating of the extension cord must be at
least 12 amps and 120 volts. The resulting extended cord must be arranged so that it will
not drape over counter top or table top where it can be pulled on by children or tripped
over accidentally.
This appliance has a polarized plug(one blade wider than the other).If it doesn’t fit your
outlet,contact a qualified electrician.Do not modify the plug in any way.
Precautions
Before use each time, be sure to check the anti-block shield, float valve and pressure
release valve for obstruction, wipe the surface of the inner pot and the heating plate to
confirm they are free of any foreign object, make sure the pressure release valve is in
sealing location.
After cooking, wait until the cooker cools down for a while and release the pressur eusing
pressure rlease valve. Use extreme caution when opening the Cover. Serious burns can
result from stream inside the unit.
If a part such as wire or plug is damaged or the programmable pressure cooker
malfunctions, stop the operation immediately and consult the Troubleshooting and
Warrantee Service sections.
Care must be taken on the seals to avoid deformation.
product from working properly.
Instant Pot® programmable pressure cooker is a new generation of kitchen appliance. It is a
5-in-1 multi-function cooker combining the benefits of a pressure cooker, slow cooker, rice
cooker, steamer and food warmer. Instant Pot® is convenient, time saver and kitchen-friendly.
It brings your green thinking right into the kitchen by saving up to 70% of energy comparing
with conventional cooking. The Instant Pot® pressure cooking reduces the cooking time by
70%, and preserves more vitamins and minerals in the natural ingredients.
Instant Pot® assures unprecedented safety with 10 proven safety mechanisms and patented
technologies. They range from lid close lock pin, electronic pressure and temperature control,
dry burn detection and automatic shutoff, over-pressure crush plate, to tempertature and
electrical current limiting fuse. Instant Pot® earned the entrusted UL certification by going
through the rigorous UL lab testing.
Multi-function: Braising, pressure cooking, stewing, steaming, slow cooking, and
keeping warm.
High Safety Standard: 10 safety mechanisms; please visit http://InstantPot.com for
detailed information.
8 built-in cooking programs controlled a microcomputer: Simply press one of the
function keys to start cooking.
Fast Cooking: Pressure inside the pot is up to 11.6 psi, reducing cooking time by upto
70%.
Tight sealed cooking process: The cooking pressure and temperature is controlled
electronically to eliminate the need of the pressure leaking regulator valve. Hence it
produces no unpleasant noise, undesirable moisture and smell residual.
Up to 24-hour Delayed Cooking: Super-long 24 hours timer. Perfect for meal planning.
Up to 60 minutes of cooking time selection.
Auto Keep Warm: After cooking, automatically starts the keep-warm function, and last
for up to 8 hours.
Dishwasher-Safe: Stainless inner pot and steam rack are dishwasher-safe.
Fail to do so may prevent the
Product Specification
Model
IP-CSG50
IP-CSG60
Accessories
Lid Handle
Lid
Seal
Lid Inside
Specification
50 model
60 model
Rice Paddle, Soup Spoon, User Manual, Measuring Cup, Steam Rack
Power
Supply
120V~60Hz
120V~60Hz
Instant Pot® - Programmable Pressure Cooker
Rated
Power
900W
1000W
Volume
Calilber of
innerpot
5L
6L
Seal support
22cm
22cm
Working
pressure
10.2-11.6Psi
10.2-11.6Psi
Warm
Temperature
Note:
Before each use, please
ensure to check the antiblock shield, pressure
lock pin valve and
exhaust valve are clean
from obstruction, wipe
the surface of the inner
pot and the heating
plate to confirm they
are free of any foreign
object, make sure the
exhaust valve is in seal
position.
Before First Use
Before first use, please take out all accessories from the package and read this Manual carefully, pay particular
attention to operational instructions and cautions to avoid any injury or property damage.
Please wash all removable parts in warm soapy water, rinse and dry thoroughly. Wipe the outer housing with
a clean damp cloth. NEVER immerse the housing in water or any other liquid. The inner pot is dishwasher safe.
But NEVER clean any other parts in a dishwasher.
Disassembly/Assembly of Anti-block shield and Seal
Disassembly
and
Assembly
of Seal
Seal
Prior to each use, inspect to make sure the seal and anti-block shield are mounted in the lid.
After use, remove any foreign object from the seal and anti-block shield.
Keep clean to avoid odor.
Never pull the seal by force, as pull deformation may affect sealing and pressure effect.
A damaged seal should not be used, and unit shall be sent to the service center for replacement.
Safe Lid Opening
Lift up
Open the lid Correctly
Hold the lid handle with a hand,
Rotate approximately 30 degrees counterclock
wise until the marking “?” on the lid is aligned
with the “Open” marking on the outer casing
Check whether all parts on the cover
are assembled properly
Check the float valve and exhaust valve for
obstruction, and whether such parts as
seal and anti-block shield are assembled
properly.
Take out the inner pot, and put food
and water in it
Place inner pot to the cooker
Before that, be sure to remove foreign object and
water attached to the outside of the inner pot and
inside of the cooker;
After putting the inner pot in, rotate the inner pot
slightly to ensure good contact between the inner
pot and heating plate.
-
A、 Quick opening (for non-fluid food)
Slide the exhaust valve to the Release position.
Put a wet towel on the lid to cool faster until the float valve falls.
B、 Normal opening
3.Open the lid
Hold the lid handle, turn the lid anti-clockwise till the open position, and lift the lid up to open.
Do not open the lid until pressure inside the pot is completely released
Never pull out the Pressure Release Valve when it is releasing pressure.
For fluid foods (congee and sticky liquid, do not slide the Pressure Release Valve for releasing pressure when
cooking is just finished, otherwise the hot food fluid may spill from the Pressure Release Valve, and cause
bodily burn. Be sure to disconnect the power supply.
When large quantity of food is cooked, do not try to release the pressure immediately after cooking. It is
recommended to let the food cool down for a while before releasing the pressure.
Close the lid completely
Before closing, check whether the seal is properly
placed around the seal support inside the lid.
Hold the lid handle and put the lid on the cooker,
with both the “?” and “Open” marks aligned. Rotate
the lid clockwise approximaterly 30 degrees until
the lid “?” mark is aligned with the “Close” mark on
the main pot.
If function keys are not respondsive, ensure the lid
is closed properly and try agin.
Position the pressure release valve
properly
Turn the pressure release handle to the seal position
Release Position
Program Functions
Cooking Program Functions
The Instant Pot® programmable cooker uses a large and user-friendly control panel. The
convenient built-in program functions allow you to cook your favorite food with a press
of a program function key. Instant Pot® IP-CSG60 includes 8 programs: Soup, Congee,
Meat/Stew, Bean/Chili, Rice, Multigrain, Steam and Slow Cook.
Soup Key
Congee Key
Meat/Stew Key
Bean/Chili Key
Shorter
Normal
Manual Key
Timer Key
Instant Pot has a safety feature to disable all cooking program keys if the lid is not fully closed. The “Keep
Warm/Cancel” key is the only exception. Please close the lid fully before using the following program
function keys. An estimated total cooking time is shown when the “Soup”, “Congee”, “Meat/Stew” and
“Bean/Chili” program is chosen.
The “Soup” key is for making various soup and broth. You can use the “Adjust” key to select a shorter or
longer cooking duration, depending on the intended cooking result. Instant Pot controls the pressure
and temperature to a level that the liquid never goes into the heavy boiling state. For example, making
chicken broth with the "Soup" function, the broth is clear and the chicken remains intact after cooking. If
you need the content to be fully broken down, please stir and mix the soup before serving.
The “Congee” key is to make porridge and congee of various grains. You can use the “Adjust” key to
select a cooking duration. The “Normal” duration is for rice congee. If you use multigrain, please choose
the “Longer” duration. Stir the congee before serving. Please note, after the “Congee” program is finished,
do NOT put steam release in venting position; otherwise the congee would spill through the steam
release. Please wait for the pot to cool down naturally before opening the lid.
The “Meat/Stew” key is for cooking meat and stew. The “Adjust” key can be used to change the cooking
time to achieve the best effect. In general, “Longer” duration is for bone-stripping effect on meat.
Keep Warm/Cancel Key
Rice Key
Multigrain Key
Display
Steam Key
Slow Cook Key
Longer
Adjust Key
The “Multigrain” key is another smart program to cook multigrain rice, such as wild rice and brown rice.
This program first soaks the grains in 60°C/140°F for 50 minutes before cooking. For 2 cups of multigrain,
it takes about 64 minutes. For 2~5 cups, it’d take about 78 minutes. If you want to cook even harder
grains, such dry split corn, it’s recommended to use the “Manual” key and set a pressure cooking time
between 40~60 minutes. Total cooking time is not displayed, whereas the pressure keeping time will be
shown when working pressure is reached. The “Adjust” key has no effect on this program.
The “Steam” key is designed for steaming purposes. You can steam vegetables, reheating with the
enclosed steam rack. When steam vegetables, please note that leaving the food in the cooker for natural
cooling down will likely over cook the food. You will need to release the steam and take the food out as
soon as cooking is finished. 1~2 cups of water are sufficient for steaming fresh or frozen vegetable with
1~2 minute pressure keeping time. The “Adjust” key has no effect on this program. Please use “+” or “-“
keys to change the steaming time.
The “Slow Cook” key simulates the slow cooker cooking. It’s equivalent to the low heating mode in a
common slow cooker at 88-93°C (190-200°F). You can change the cooking duration with “+” or “-“ keys
between 1 and 10 hours. The “Adjust” key has no effect on this program. This is the only program that
requires the steam release being set to the open position.
The “Keep Warm/Cancel” key serves two functions. When any program is in effect, press this key will
cancel that program. When other program finishes cooking, Instant Pot automatically switch to
keep-warm state at 62~74°C (145°F-165°F) for up to 8 hours. When the pot is not in cooking mode,
pressing this key would also make the pot entering keep-warm state. This is the only key which can be
activated with or without the lid being fully closed. When Keep-Warm function is activated, the display
will show “0H”, “1H”, … “8H” to count the number of hours in this state.
The “Manual” key allows manual setting of cooking time. Please note that the time set in this mode is
pressure keeping time which will count down when working pressure is reached. The maximum pressure
keeping time is 60minutes.
The “Timer” key is for delayed cooking. To start delayed cooking, first select the desired cooking function
(all program function except the “Slow Cook”), and then press the “Timer” key. The time displayed is the
number of hours from now to ready-to-serve state,. i.e. the cooker is cooled and the lid can be opened.
The time is not delayed starting time or hour. If you set the delay timer to 8 hours at 9 am, the food will
be ready at 5 pm, 8 hours later. “Timer” starts with 2 hours and can be adjusted with “+” or “-“ key up to
24 hours. Please note that if 2 hours is selected, some program, e.g., “Multigrain” may start right away to
ensure that the food will be cooked and ready-to-serve in 2 hours.
The “Adjust” key is to change the cooking mode in “Soup”, “Congee”, “Meat/Stew” and “Bean/Chili”
programs. It does not affect other programs.
The “Bean/Chili” key is specifically for cooking beans and making Chili. If you want the beans well
cooked, please use the “Adjust” key to select “Longer” duration.
The “Rice” key is a fully automated smart program for cooking regular rice. The cooking duration is
adjusted automatically depending on the amount of food content. To cook 2 cups of rice, it takes about
14 minutes (6 minute pressure keeping time); for 3~5 cups of rice, it takes about 28 minutes (10 minute
pressure keeping time); more cups will take longer time accordingly. Total cooking time is not displayed,
whereas the pressure keeping time will be shown when working pressure is reached.The “Adjust” key has
no effect on this program.
Timer Function
The general cooking program usage procedure is as follows:
1. Follow steps in Cooking Preparation.
2. Connect power cord.
3. Select a cooking program function Key.
Once a function key is pressed, the indicator of a corresponding function will turn red.
Cooking and cooling time may vary depending on different cooking program selections.
Cooking time may vary slightly with the quantity of food and liquid and textures of rice
and multigrain. The cooking time table below is for reference only.
(E.g. food amount + water reaches scale 8 inside the inner pot):
cooking time= heating time + pressure-holding time
Adjust Cook Time
1. Follow steps listed in the Cooking Preparation section.
2. Select a corresponding program key. Refer to Cooking Program Functions for program
selection.
3. Adjust cook by pressing the “Adjust” key.
If the “Adjust” key is pressed continuously, the LED display panel displays ”Shorter”,
“Normal”, and ”Longer” in cycle. When one of Shorter, Normal and Longer is selected, the
corresponding cook time appears on the LED display panel. Only the “Soup”, “Congee”,
“Meat/Stew” and “Bean/Chili” programs have the “Adjust” function available. The Adjust
cook time for different cooking programs are different.
4. After cooking, the cooker will go into the keep warm function automatically.
the yellow “Keep-Warm” indicator comes on and the cooker starts the keep warm
function.
4. Cooking starts 10 seconds after the selection of a function
Within 10 seconds after pressing a program function key, you can still select any other function keys and
adjust duration levels. The cooker will start work in 10 seconds after the final selection. Adjust is an optional
step.
Duration default is “Normal”; press the “Adjust” key continuously, to select among “Normal”, “Shorter” and
“Longer” modes.
During the operation, you can cancel current cooking program in progress and return to standby mode by
pressing the “Keep-Warm/Cancel” key.
Within10 seconds, a long audible beep will sound to indicate the cooking process has started. A circular
motion LED display indicates the pre-heating is in progress.
As the pressure increases inside the cooker, the pressure lock pin valve will pop up.
Once the pressure inside the cooker reaches the desired level , the circular display on LED panel will
change to the cooking time display. The cooking time counts down to indicate the remaining time in the
unit of minute.
5. After cooking, the cooker starts the keep warm function automatically.
The corresponding function indicator goes out. The cooker makes a audible beep. The
“Keep-Warm” indicator is on to show the cooker is in the keeping warm function.
It is not recommended to leave the cooked rice in “Keep-Warm” state for too long as it
may affect the cooking result
Tip:
While the cooking is in progress, you can cancel the current cooking program and return
to Standby mode by pressing the “Keep-Warm/Cancel” key.
During operation, the Instant Pot may make low click sound. This is from the normal
operation of the Instant Pot® controlling the power cycle.
When cooking with a small quantity of food, the inner pot may appear to be stuck on
the lid by pressure when the lid is opened. In this case, shake the lid slightly, and then
remove the lid after the inner pot falls back into its position.
Delay Timer Function
The Instant Pot® programmable pressure cooker has a delay Timer function of up to 24 hours. No Timer
function is made available to “Slow Cook” function.
Tips:
Timer is recommended to be set less than 12 hours.
In case of a long timer delay and warm room temperature, the perishable food may not be fresh after
the long delay time set at the room temperature.
Cooked rice may yield overly soft texture due to long soaking time. It may also cause burning of rice at
the bottom layer. burned.
1. Instant Pot® delay Timer setting with Cooking Programs
Follow steps listed in the Cooking Preparation section.
Within 10 seconds after program selection, press the “Timer” key to set a cooking end time.
When the “Timer” key is pressed, the screen displays Timer End Time starting with 2-hour delay
(2.0 on display). The green Timer indicator light starts to flash. Press “+” or “-” key to increase or decrease
the timer by 0.5 hour. Repeatly press the “+” or “-” key, until the intended timer value is displayed. The
minimal delay Timer value is 2.0 hours. The “Timer” key can also be used to increase the timer value by
0.5 hour each time the “Timer” key is pressed. The Timer value will stop increasing when it reaches 24.0.
The Timer value displayed on the LED display panel indicates the cooking end time.
After 10 seconds of last press on the ‘Timer’, or key, the flashing green light on the “Timer” key
changes to the stable green light. This indicates the start of the delay Timer countdown.
www.instantpot.com
By Pressing “Timer” key
selects timer function
To cancel the Timer operation, press the “Keep-Warm/Cancel” key.
2. The food should be ready when the delay Timer counts down to 0. The cooker will then enter the
keep-warm function automatically. Keeping warm for longer time is not recommended.
Cooking End Time may not be exact as set due to various reasons. If cooking completes before the set
time, the cooker will then enter into “Keep-Warm” function automatically.
By pressing Or Key
sets timer
www.instantpot.com
The display shows that the
cooking will be ended in
10 h and 30 min.
”Manual” Cook Time Setting
Cook time is the amount of time the Instant Pot® cooks the food after the inside pressure reaches the
desired level. The “Manual” key offers you the option to further customize the cook time depending on
the quanity of food and fluid in the pot. Cook time can also be set based on your own preference for the
desireable texture and tenderness of the food. Generally, the more quantity of food and fluid are put in
the pot, the more time it requires to fully cook.
1. Follow steps listed in Cooking Preparation section.
2. Press the “Manual“ key to set the cook time.
Each press on the or key increases or decreases the cook time by 1 minute. Repeatly press the
or key until it reaches the desireable amount of time in minutes. The maximum cook time is 60
minutes.
Keep Warm Function
After cooking, the selected cooking function indicator light (red) will come off. The cooker also
gives an adible beep. The yellow “Keep-Warm” indicator light will be on to indicate that the cooker
starts the “Keep-Warm” function. In the standby mode, the keep warm function can be started by
pressing the “Keep-Warm/Cancel” key.
The “Keep-Warm” state temperature is 60-80°C(140-176°F);
The keep warm time is displayed on the LED display panel starting from 0H (under 1 hour), 1H
(between 1 hour and 2 hours), 2H … etc.
Keeping warm for a longer time is not recommended, as it may negatively affect the texture or the
taste of the food.
Steam Function
The time required to fully steam–cook the food can be different amongst different types of food.
You can choose the length of cook steam-time as you require.
1.Follow steps listed in Cooking Preparation section.
2.Press the “Steam” key. The LED display panel shows the value of 30 minutes.
3. Press or to adjust the steam-cook time between “00” and “60” minutes.
You can set the cook time based on you personal taste, type and quantity of food, as well as
any other preference you may have.
When steaming, water added should not be less than 2 cups. The table below shows
approximate time required for different food
The total time includes the pre-heating time and cook time.
(time values in this table are for reference only.
www.instantpot.com
By pressing ‘Manual’ cook time
key, select preference cook time.
If the delayed Timer function is required, press the “Timer” key to set the delay timer value within 10
seconds of last key press. Refer to Timer function for setting the delay Timer.
After setting the delay Timer, the green “Timer” indicator flashes for 10 seconds.
When the “Timer” indicator light is solid, the delay Timer starts to count down.
3. Cooking complete
There is an audible beep when cooking is completed. The red “Manual” indicator light comes off, and
the yellow indicator light on the “Keep-Warm” key comes on. The cooker automatically goes into the
keep warm state. If keep warm is not needed, press the “Keep-Warm/Cancel”
key to cancel the keep warm function. Open the lid according to the Safe Lid Opening method
www.instantpot.com
By pressing or key,
select pressure-holding
time.
After 10s, the Cooker enters
into pre-heating state, then to
pressure-holding state with
cooking time shown on display.
1
6 8
10 20
15
25
4. 10 seconds after the selection, the cooker makes an audible beep. The display panel shows
the cook time. The cooker is now starting the steam-cooking function.
press the“Keep-Warm/Cancel”key.
)
(To cancel the operation
5. When the total steam-cook time is reached, the cooker makes an audible beep. The “Steam”
indicator light comes off. ”Keep-Warm” indicator comes on. The cooker starts the keep warm
function.
Tip : rice storage
Rice &
Multigrain
Cooking rice with delay Timer
Example: Now it is 9:00 PM, and you are preparing a multigrain meal to be ready at
7:30 AM the next morning. In other words, you expect the meal to be ready in 10.5
hours.
Prepare the measured amount of rice
A cup of rice can serve one person.
Rice can be washed as you may desire.
Put the rice in the inner pot.
Add water to the desireable level
Add water to the right scale level on the side of the
inner pot.
The scale line inside inner pot means the rice
cooking reference water level. Example: In order to
cook 2 cups of rice, adds water to the scale line 2.
The amount of water can vary depending on
different type of rice, but it should never exceed the
maximum scale line inside the inner pot.
Store rice in a cool and dry place.
Odor may occur if the rice is retained for
a long time.
Do not buy too much rice at one time.
Rotate the inner pot slightly from left to right to
ensure full contact between the inner pot and the
round heating plate inside the outer pot.
Finish cooking preparation according to
instructions in Page 5.
Plug the Electric Pressure Cooker.
Press the “Rice” or “Multigrain” key
The “Rice” or “Multigrain” function indicator will light up.
The cooker will begin cooking in 10 seconds. If the Timer function is
required, make sure that the Timer key is pressed within 10 seconds
of pressing the “Rice” or “Multigrain” key.
Press “Timer” key to set the cooking end
time if delay Timer function is required
Press the “Timer” key is pressed, “2.0” is displayed on the LED display panel.
The green Timer indicator light starts to flash.
Press the or key is pressed until “10.5” is displayed
Wait for 10 seconds. The flashing Timer indicator light becomes stops
flashing and stay on. The Timer cooking process starts.
Cooking ends at 7:30AM tomorrow
After cooking, the unit will beep 10 times with the “Rice”
indicator off and the ”Warm” indicator on indicating that the
cooker has gone into the keep warm state;
Long time keep warm is not recommended.
If it is difficult to open the cover, pressure may exist inside the
cooker. Please refer to page 8 to open the cover.
To cook congee, the recommended rice:water ratio
is about 1:7.
Congee
Cooking congee with delay Timer
Example: Now it is 9:00 PM, and you want to have the
congee ready at 7:30 AM tomorrow the next morning.
Complete cooking preparation according to Page 5
Rice to water table for cooking congee with the programmable
pressure cooker:
The ratio of rice to water can be adjusted according to personal
tastes.
Press the “Congee” function key
The “Congee” indicator light comes on.
Select “Adjust” within 10 seconds after the
press of the “Congee” func tional key.
When cooking congee or any food qith stick fluid,
DO NOT open the Pressure Release Valve to speed
up the pressure release process. The hot stick lfuid
coming out of the Pressure Release Valve may cause
burn on the hand.
Press the “Adjust” key
When the “Adjust” key is pressed continuously, the Adjust time
indicator changes from ”Shorter”, “Normal” and ”Longer” in circle.
The LED display panel show the corresponding time values for
“Shorter” (30 minutes), “Normal” (35 minutes) and “Long”
(45 minutes).
The “Keep-Warm/Cancel” key can be pressed to cancel the
operation at any time
You may skip the “Adjust” step if you have no special perference for
the thickness of the congee. Duration default is the “Normal”.
Press “Timer” key to set cooking end time
Press the “Timer” key is pressed, “2.0” is displayed on the LED display
panel. The green Timer indicator light starts to flash.
Press the “+” or “-“ key is pressed until “10.5” is displayed
Wait for 10 seconds. The flashing Timer indicator light becomes
stops flashing and stay on. The Timer cooking process starts.
After cooking, the cooker will make an audible beep, and the
“Congee” indicator comes off. The ”Keep Warm” indicator comes
on. The programmable pressure cooker starts the keep warm state
function.
Longer Keep-Warm time is not recommended.
If it is difficult to open the lid, pressure may still exist inside the
cooker. Please refer to “Safe Lid Opening” method to open the lid.
Slow
Cook
5 finely chopped garlic cloves; 1 large diced tomato
2 tablespoons olive oil; 2 tablespoon of red wine
1 tablespoons fresh rosemary; 1 large sliced onion
2 cups water or reduced salt chicken stock
3 tablespoons light soy source; Salt and pepper to taste
Preparation
Rub the mixture of olive oil, rosemary and chopped
garlic around the lamb and season with salt and pepper.
Set in the fridge for at least 4 hours or overnight.
Heat the large non-stick pan, Put 1 tablespoon of olive
oil and stir-fry half of the onion slices until the onion
slices are slightly browned. Brown the leg of lamb in the
pan until it is browned on all sides.
Lamb Roast
Ingredients - 4 Servings
1 (3 lb) leg of lamb
Place all ingredients in inner pot
Put the remaining onion slices, diced tomato, stock and
soy sauce, the lamb into the inner Pot.
Be sure to cover with lid with sealing ring in place and
valve in venting position.
Press “Slow Cook key ” key
The default is 4-hour as shown in the LED display
panel. Leave it as default cooking time.
Press or key to increase or decrease the
cooking time (in hour) if desired.
10 seconds after the last press of the key, there will be 3
audible beeps and cooking will start. The time value
shown in the LED display panel will decrease by 1
every hour.
Cooking ends
After cooking, the unit will beep 10 times with the “Slow
Cook” indicator off and the ”Warm” indicator on
indicating that the cooker has gone into the keep warm
state.
Remove immediately and let the lamb rest 15 to 20
minutes before slicing.
Stop use the product
immediately, send it
back to an InstantPot®
authorized service
center.
Cleaning
1. Clean the product after each use.
2. Before cleaning, unplug the unit and start cleaning and maintenance after the product cools down
completely.
3. Remove the lid and take out the inner pot, wash them with detergent, rinse with clear water and then
wipe them dry with a soft cloth.
4. Using clear water to clean the lid, including the seal, exhaust valve, anti-block shield, exhaust valve
core and float valve, and wipe it clean with dry soft cloth.
5. Clean the cooker body with clean damp cloth. Do not immerse the cooker into water.
* Do not use a wet cloth to clean the pot while the power cord is plugged into the power outlet.
Limited Warranty
Instant Pot Company (IPC) warrants this appliance to be free from defects in workmanship
and material, under normal residential use, for a period of one (1) year from the date of
purchase. This warranty extends only to the original purchaser. A purchase receipt or other
proof of date of original purchase is required before warranty service is performed. IPC’s
obligation under this warranty is limited to replacing or repairing, at IPC’s option, the
appliance through one of its authorized service centers. All repairs for which warranty
claims are made must be pre-authorized by IPC.
This appliance comes equipped with many safety features. Any attempt to interfere with their operation may
result in serious injury/damages and void this warranty. No warranty service will be provided to any
appliance that has been tampered with.
This warranty does not cover normal wear of parts or damage resulting from a negligent use or misuse of the
appliance, use contrary to the operating instructions, failure to provide reasonable and necessary mainte
nance, or disassembly, repair or alteration by any one other than IPC authorized service centers. Further, the
warranty does not cover damage resulting from Acts of God, such as fire, flood, hurricanes and tornadoes.
IPC is not responsible for shipping cost for warranty service.
Limitation and Exclusions
To the extent permitted by applicable law, the liability of IPC, if any, for any allegedly defective appliance or
part shall be limited to repair or replacement of the appliance or part and shall not exceed the purchase price
of a comparable replacement appliance or part. THE PROVISIONS OF THIS WARRANTY ARE YOUR SOLE AND
EXCLUSIVE REMEDY WITH RESPECT TO THE PRODUCT(S) COVERED BY THIS WARRANTY. ALL IMPLIED
WARRANTIES WITH RESPECT TO THE APPLIANCES(S) INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.
IPC is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the appliance or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential
damages of whatsoever nature. Some provinces/states do not allow the exclusion or limitation of incidental
or consequential damages. Accordingly, the above limitation may not apply to you.
Warranty Service
If you have any question regarding this warranty or would like to obtain warranty service, please following
these steps:
1. Consult with the retail store that you purchased your product
2. Visit our website to identify the service center near you.
3. Email our support team at, support@instantpot.com or write a letter explaining the problem, Including:
your name, address and contact telephone no and a copy of the original receipt.
4. Call us on our toll free number, 1-800- 828-7280 extension 2.
Contact Information
Instant Pot Company Web Site: http://www.InstantPot.com
11 - 300 Earl Grey Dr. Suite 383 Email: support@InstantPot.com
Ottawa, Ontario, K2T 1C1 Telephone: +1 800 828-7280
Canada Fax: +1 613 800-0726
You the buyer may have other rights and remedies under your state's or province’s applicable laws, which are
in addition to any right or remedy which may be available under this limited warranty.
-
15 16
Troubleshooting
The following unusual cases are not completely caused by mechanical failures. Please examine carefully
before sending the unit for repair.
S/N Problem Possible Reason Solution
1
Difficult to close the lid
2
Difficult to open the lid
Steam leaks from the lid
3
4
Leak from float valve
Float valve unable to rise
5
Steam coming out from
6
exhaust valve continuously
Display remains black after
7
power on
C1 appears on screen
All
LEDs
8
flash
9
Rice half cooked or too hard
Rice too soft
10
Intermittent beeping after the cooker
11
starts for a while
C2 appears on screen
C5 appears on screen
C6 appears on screen
12
Seal not installed properly
Float valve in the upright position
Pressure exists inside the cooker
Float valve fails to fall after steam
release
No seal
Seal Damaged
Foreign object attached to seal
lid not closed firmly
Food attached to float valve seal
Float valve seal worn-out
Too little food or water in inner pot
Leak from lid or exhaust valve
Pressure control fails
Exhaust valve not in sealing
position
Bad power connection
Faulty sensor
Temperature is too high because
there is no water inside the inner pot
Temperature is too high because
inner pot is not placed
Pressure switch fails
Too little water
Cover opened prematurely
Too much water
Indication of overheating. The
cooker has reduced the heating
temperature, and may not
reach cooking pressure.
Position the seal well
Press the float valve lightly downwards
Use the steam release to reduce the internal
pressure. Open the lid after the pressure
completely released.
Press the float valve lightly with
an object.
Install the seal properly
Replace the seal
Clean the seal
Open then Close the lid again
Clean the flat valve seal
Replace the float valve seal
Add water according to the rule
Contact the service center for inspection
Contact the service center for inspection
Slide the exhaust valve to the
Sealing position
Inspect the power cord to make sure a
good connection
Contact the service center for inspection
Add water as required
Put the inner pot prooerly
Contact the service center for inspection
Add water according to the rule
After cooking cycle completes , leave the
cover on for 5 more minutes
Add water according to the rule
Possibly starch deposits at the bottom
of the inner pot, which have clogged
heat dissipation. Stop the cooker and
inspect the bottom of the inner pot.
Ensure the lid is closed properly.Function keys are not responsive Lid is not closed completely.