Hello! Thank you for welcoming us into your kitchen.
Having families ourselves, we developed the Instant
Ace™ to allow busy families and professionals alike to
cook healthy, delicious meals more easily and in less time.
We have partnered with chefs, authors and bloggers to
compile a collection of recipes that we hope you enjoy!
Happy Cooking!
Robert J. Wang
Founder & Chief Innovation Officer
™
2
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed:
1. READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE
OPERATING BLENDER.
2. Always operate the appliance on a horizontal surface that is level, stable, and
non-combustible.
3. Do not touch hot surfaces. Handle with care and always use handle on side of pitcher
for carrying.
4.
5. Close super vision is necessary when any appliance is used by or near children.
6. To disconnect, select Cancel, then unplug from outlet when not in use, before
7. Flashing light indicates blender is ready to operate. Avoid inadvertent contact with
8. Allow the unit to cool before putting on or taking off parts and before cleaning.
9. Do not operate any appliance with a damaged cord or plug or after the appliance
10. Do not use any accessories or attachments not authorized by Instant Brands Inc.
11. For household countertop use only. Do not use outdoors. Not for commercial use.
CAUTION
immerse power cord, plug, or blender base in water or other liquid.
Children should be supervised to ensure they do not play with the appliance.
assembling or disassembling parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
the touch screen.
Proper maintenance is recommended after each use. Refer to “Care & Cleaning”.
malfunctions, or is dropped or damaged in any manner. This appliance has important
markings on the plug blade. The attachment plug and/or cord set is not suitable for
replacement. If damaged, the appliance must be replaced. Contact Customer Care for
warranty information.
The use of attachments not recommended by the manufacturer, such as spatulas or
tampers, may result in fire, electric shock or injury to persons.
To protect against electrical shock, fire, or personal injury, do not
12.
13. Do not place the appliance on or in close proximity to a hot gas or electric burner, or a
14. Extreme caution must be used when moving the appliance containing hot liquids.
CAUTION
surface, including the stove.
heated oven; heat from an external source will damage the appliance.
Do not let cord hang over edge of table or counter, or contact hot
WARNING
Read thi s manual carefu lly and complet ely, and retain for fu ture referenc e.
Failure to a dhere to safety i nstruction s may result in ser ious injury.
1
IMPORTANT SAFEGUARDS
15. Do not use appliance for anything other than intended use.
16. Blades are sharp. Avoid contact with blades and moving parts. Handle with care.
17. The blades are not removable from the pitcher. Do not attempt to disassemble the
blade assembly. Failure to follow this direction may cause injury.
18. Do not attempt to operate the blender with damaged blades.
19. This product is not designed to deep fry.
20. To avoid spill or splatter, do not fill the pitcher beyond measurement indicators.
21.
22. When making nut butters or oil-based foods, processing for long periods can cause
23. Never blend carbonated beverages. Built-up pressure from released gases can cause
24. Always operate blender with lid in place. The lid and/or lid cap should only be removed
25.
26. Do not attempt to repair, replace, alter, or modify components of the appliance, as this
27. Do not tamper with any of the safety mechanisms.
28. Do not use unit in electric systems other than 120V~60Hz for Canada & USA.
29. Never remove or rock the pitcher/lid during operation.
CAUT ION
before handling or serving. Keep hands away from hot glass and use side handle for
carrying. Failure to comply may result in scalding or serious injury.
dangerous overheating. After the Smart Program completes, do not process for more
than 2 additional minutes.
the pitcher to overflow, resulting in possible property damage and/or injury.
when the blender is off or Paused, in order to add ingredients to the pitcher or use the
food tamper.
CAUT ION
from children. Never drape cord over edge of counter, and never use power outlet
below counter.
may cause electric shock, fire or injury, and will void the warranty.
Do not use with power converters or adapters.
Pitcher will be hot after cooking. Allow sufficient cooling down time
Spilled food can cause serious burns. Keep appliance and cord away
30. Keep hands and utensils out of pitcher while blending to reduce the risk of severe injury
to persons or damage to the blender. The lid must remain in place when using the food
tamper through the lid opening. A scraper may be used but must be used only when
the blender is not running.
2
WARNING
Read thi s manual carefu lly and complet ely, and retain for fu ture referenc e.
Failure to a dhere to safety i nstruction s may result in ser ious injury.
IMPORTANT SAFEGUARDS
31. Never put non-food items, such as metal, glass, plastic or wood, in the blender, as
this may damage the blades and other components of the blender. Failure to remove
foreign objects from blender may break the glass pitcher, or cause injury.
32.
33. Do not operate the blender while the pitcher is empty.
34. Do not leave appliance unattended while in use.
35.
36. Prior to each use, inspect appliance for cracks or other damage. Do not use if the lid, lid
37. This appliance is NOT to be used by children or by persons with reduced physical,
CAUT ION
programs, or when blending hot contents. Spray, steam, or spatter may cause scalding
burns if the lid or lid cap is removed when blending hot contents. Do not overfill pitcher.
Keep hands away from lid openings to prevent burns.
CAUT ION
cap, pitcher, or blender base is cracked or damaged, and contact Customer Care.
sensory, or mental capabilities. Close supervision is necessary when any appliance is
used near children. Children should not play with this appliance.
The vented lid cap must be in place when using hot blending
Lids and tampers are not interchangeable between different blenders.
SAVE THESE INSTRUCTIONS.
WARN ING
WARN ING
NOTI CE
CREATE TH E RISK OF SERIO US INJURY.
To avoid injury, read and understand instruction manual before using this appliance.
Electr ical Shock H azard. Use gro unded outlet onl y. DO NOT remove ground. DO NOT use an adapter.
DO NOT use an extensi on cord. Failur e to follow instr uctions can c ause electri cal shock or de ath.
THE FAILU RE TO FOLLOW ANY OF THE IMPO RTANT SAF EGUARDS AND THE IMPO RTANT
INSTRU CTIONS FOR SA FE USE IS A MISUSE O F YOUR BLE NDER THAT CAN VOID YOU R WARRANT Y AND
Product Specifications
Model: Ace 60Heating 600W
Blending 700W
WARNING
120V ~ 60 Hz1.6 Litres
56 Ounces
Read thi s manual carefu lly and complet ely, and retain for fu ture referenc e.
Failure to a dhere to safety i nstruction s may result in ser ious injury.
7.7 lb s
3.5 kg
in: 9.4L x 8.1W x 16.9
cm: 24L x 20.7W x 42.9
3
What’s Included
Before using the Instant Ace, verify that all parts are accounted for. Read instructions
carefully, and pay attention to Important Safeguards and operation instructions. Do not
remove safety stickers from blender base, pitcher, or lid. Do not remove rating label from
blender base.
LidBaseGlass Pitcher
(Tamper / Measuring Cup / Cleaning Brush)
3-in-1 Food Tamper
4
Strainer Bag
Product Specifications
Lid
Glass
Pitcher
Lid Cap
Safety Lock
Lid Brace
Black Silicone Seal
Safety Lock
Lid Brace Catch
COLD
56
OZ
HOT
48
48
40
32
24
MAX
40
32
24
Measurement Indicators
Handle
8 Steel Blades
Concealed Heating Element
Position Indicator
Blender
Base
Steel Blade Coupler
Position Indicator
Control Panel
Real-Time Temperature Display
Motor Vents
Non-Slip Foot Pads
5
Getting Started
40
48
32
24
Hot
MAX
40
48
32
24
HOT
MAX
Before using your Instant Ace, follow the steps below to clean the pitcher and lid.
1
Read Manual & Place Blender
Do not remove safety stickers from blender base, pitcher, or lid.
Do not remove rating label from bottom of blender base.
Place blender base on a stable surface.
CAUTIO N
external source will damage appliance.
2
Secure Power Cord
Connect to a 120V power source.
Display will remain blank until pitcher is in place on
blender base.
3
Fill Pitcher with Water
With the lid removed, fill with hot water to 32 oz / 1000 mL
as indicated on the pitcher.
Do not pla ce appliance o n or in close prox imity to a hot
gas or ele ctric burne r, o r a heated oven; heat fr om an
Read
Manual
4
Secure Lid
Place lid on pitcher and turn lid clockwise until it clicks
into place.
Lid braces must fit over glass lid brace catches, located
on pitcher.
5
Place Pitcher
Place the glass pitcher on blender base by aligning the
position indicator
position indicator
indicate “OFF”.
6
near the bottom of the pitcher to the
near the top of the base. Display will
Getting Started
6
Add Dish Soap
Turn lid cap counter-clockwise to remove lid cap from lid.
Add a few drops of dish soap to pitcher.
Fit lid cap into lid and turn clockwise until it clicks into place.
CAUT ION
may cause the pitch er to overow.
7
Select Program
Add a minimal amount of dish soa p to the pitc her.
Too much dish soap resul ts in exces s foam, whi ch
Press Pulse/Clean.
Blender will run high speed cycles, pausing between pulses.
When Program has completed, display will indicate “End”.
8
Empty Pitcher
Lift pitcher up and off blender base.
When pitcher is removed from blender base, display will go
blank.
Turn lid counter-clock wise and lift up and off pitcher.
Discard soapy water and rinse pitcher, lid, and lid cap with
warm, clear water.
MAX
HOT
48
COLD
56
40
OZ
32
48
24
40
32
24
WARN ING
Do not rea ch into pitche r while blend er is in use. Rotat ing blades ca n cause damag e and serious i njury. Do not put ha nds, spatula s, or any other uten sil
into pitcher while blender is running.
7
Page Title
Controls & Features
1
2
3
7
4
5
6
1
Cook Time Display
Shown in minute format: “05:20”
is 5 minutes, 20 seconds
2
Error Indicator
If error occurs, light will blink and error code
will be displayed below
3
LED Indicators
Illuminate when programs are selected
4
Real-Time Temperature Display
During hot blending programs, real-time
temperature is displayed in Fahrenheit (°F)
or Celsius (°C)
To change displayed temperature from °F to
°C, first press Cancel to ensure the blender is
in Standby. Next, press and hold Pause for 5
seconds. Blender will beep once and display
the selected temperature
5
Manual Blending Keys
3 Speeds: Low / Med / High
Note: Blending Program keys with 2 dots ( • • ) on them can toggle between options 1 & 2. See “Hot Blending” section
in this manual.
6
Control Keys
• Pulse/Clean: Press to run high speed blending
cycles, pausing between pulses
• Start/Pause: Press to star t program. Once
Smart Program has begun, press to pause at
any time. Display will indicate -P- when paused.
Press again to resume
Note: If the lid is removed during blending, the
blender will automatically pause the program
When ready to resume, secure lid and press
Start/Pause
• Cancel: Press to stop a Smart Program at any
time. Blender w ill go to Standby (“OFF”)
7
Smart Programs
Cold Blending Programs
• Smoothie
• Crushed Ice
• Frozen Desserts
• Nut / Oat Milk
Hot Blending Programs
• Purée • •
• Soy Milk
• Rice Milk • •
• Soup • •
8
Stacking Food Ingredients
When blending cold ingredients, the order in which ingredients are placed in the pitcher may
affect the blender’s performance. It is best to add the liquid ingredients first and then add
the dry ingredients after.
To prevent risk o f injury or dama ge to the blender, do n ot attempt to gri nd hard, non-f ood items such as w ood, glass, ston e, plastic or met al.
INSTANT TIP: One-Pitcher Performance
Follow the stacking guide above for optimal blending results, and to ensure your
blender’s longevity.
9
Manual Blending
Blend continuously at the selected speed for up to 3 minutes.
Minimum* Liquid
1/4 cup / 2 oz / 60 mL56 oz / 1600 mL48 oz / 1400 m L32 oz / 1000 m L
*Minimum and maximum content guidelines are recommendations. For specific instruction, refer to a trusted recipe.
Maximum* Cold
Contents
Maximum* Hot
Contents
Maximum* Dry
Contents
1. Connect power cord to a 120V power source.
2. Add recipe ingredients to pitcher. For cold ingredients, refer to “Stacking Food Ingredients” section in this manual.
3. Place lid on pitcher and turn lid clockwise until it clicks into place. Lid braces must fit over
glass lid brace catches, located on pitcher.
4. Place pitcher on blender base.
5. Press Low / Med / High to select blending speed.
6. Press Start/Pause to begin blending at the selected speed.
7. Press Low / Med / High to adjust the blending speed at any time without
interrupting blending.
8. Press Cancel to stop blending at any time. Blending ends after 3 minutes to prevent
overheating. To continue blending, press Cancel followed by Low / Med / High.
Blending SpeedLowMediumHigh
Display258
Blending Dry Ingredients
When blending dry goods, ensure the pitcher, blades, lid & lid cap are completely dry.
Size of Dr y IngredientBlending Speed*
Smaller than ½ inch / 1.25 cmHigh
Larger than ½ inch / 1.25 cmMedium
*As ingredients break down, you may increase the blending speed.
INSTANT TIP: Blending Fibres
Some food ingredients take longer to break down than others. When processing firm
or woody ingredients, such as kale, herbs or broccoli stalks, use manual blending for
easy processing.
10
Cold Blending
Cold blending programs blend at different intervals throughout the countdown, breaking
down frozen fruits & vegetables, nuts, seeds, oats, and more. Blend smoothies, crush ice for
summer drinks, and create frozen yogurt and small-batch sorbet.
Note: The blender will not cool or freeze food items. For smoothies and frozen desserts use chilled and frozen
ingredients, and tamp often.
Minimum* LiquidMaximum* Cold Contents
1/4 cup / 2 oz / 60 mL56 oz / 160 0 mL
*Minimum and maximum content guidelines are recommendations. For specific instruction, refer to a trusted recipe.
Cold Blending ProgramFoods
SmoothieFresh or frozen fruit s, berries, se eds, yogurt, liquid
6. Press Start/Pause to begin blending. Blades will pulse intermittently as timer
counts down.
7. Press Cancel to stop blending, or wait for countdown to complete.
8. When program has completed, blender will beep 10 times and display will show “End”.
9. Remove lid and serve.
CAUTION
When blending thick contents, do not ll the pitcher higher than 32oz / 1000mL to avoid overhe ating the motor.
11
Hot Blending
Hot blending programs combine boiling and blending for optimal one-pitcher performance.
Cook fresh ingredients, or blend and heat pre-cooked ingredients into soups, purées, baby
food and more.
Note: These programs apply a gentle-blending start, then add an intermittent quick-stir motion to agitate food
contents throughout the cooking program.
Minimum* LiquidMaximum* Hot Contents
1/4 cup / 2 oz / 60mL48oz / 140 0mL
*Minimum and maximum content guidelines are recommendations. For specific instruction, refer to a trusted recipe.
Hot Blending ProgramFoods
Puree
Rice Milk
Soy Milk-Soy Milk
Soup
1. Connect power cord to a 120V power source.
2. Add recipe ingredients to pitcher according to “Stacking Food Ingredients” section in
this manual.
3. Place lid on pitcher and turn lid clockwise until it clicks into place. Lid braces must fit over
glass lid brace catches, located on pitcher.
4. Place pitcher on blender base.
5. Select a hot blending program: Puree, Soy Milk, Rice Milk, Soup.
6. If applicable, press the same key again to toggle between options 1 & 2.
Refer to chart above.
7. Press Start/Pause to begin. Display will indicate real-time temperature as contents heat.
8. Cook time countdown will begin once target temperature is reached. Blades will stir
intermittently as blender heats, as well as throughout the countdown.
Note: After the blender pulses, you may see the temperature drop. This is normal.
9. Press Cancel to stop program, or wait for countdown to complete.
10. When program has completed, blender will beep 10 times and display will show “End”.
11. Carefully remove lid and serve.
•Soft Veg etables & Fruit (tomatoes , spinach, pea ches)
• •Hard Vegetables (ca rrots, onions, Bruss els sprouts)
•White Rice Milk
• •Brown Rice Milk
•Chunky Soup
• •Creamy Soup
Removin g the lid cap when b lending hot co ntents may result i n
scald ing injury. To tamp hot co ntents, press Pause or t urn the
blende r o by pressing Cancel, then remove the lid compl etely
before inserting tamper.
WARN ING
The pitc her will be hot dur ing and after c ooking. To avoid burn s, do
not touc h the hot surfac es. Use the hand le on the side of the pitcher
to carr y and pour.
12
Page Title
Tamping Food Ingredients
As required, use the tamper to push food from sides of pitcher towards the blades, or to
release air bubbles that may form during blending.
When inserted through the lid opening, the guard near the top of the tamper prevents the
tamper from making contact with the blades.
1. Follow steps 1-5 in “Cold Blending” or 1-6 in “Hot Blending” sections of this manual.
2. Press Pause.
3. Remove the lid cap from the lid.
4. Insert the food tamper through the lid cap opening.
5. Push food down from sides of pitcher towards blades.
6. Fit lid cap into lid and turn clockwise until it clicks into place.
7. Press Start/Pause to resume program.
Do not rea ch into pitcher w hile blender is i n use. Rotating bl ades can
cause damage and serious injury. Do not put hands, spatulas, or any
other utensil into pitcher while blender is running.
13
WARN ING
Lids and tamper s are not interchange able betwe en dierent blen ders.
Only use accessories and small parts included with purchase.
Care & Cleaning
Unplug when not in use, and allow to cool before cleaning or storage.
Cleaning Method
Part
Safe
Dishwasher
(Immersible)
Lid
Measuring CupIf dishwashing, place on top ra ck
Food TamperIf dishwashing, p lace on top rack
Strainer BagTurn inside out when cleaning, and spread open to dr y
Cleaning BrushUse to clean under blades in pitcher
Glass Pitcher
Blender Base
Only
Hand Wash
(Do not im merse)
• Remove lid cap from lid when cl eaning
• Remove black silicone seal f rom lid periodic ally
for cleaning
• Blades are not removable
• Do not store food in the pitcher
• Do not wet bottom side of pitcher
• Ensure bot tom of pitcher is dr y before placin g it on
blender base
• Unplug a nd wipe clean with a soft, damp cloth
• Never fold the power cord
Cleaning Tip
Do not immerse pitcher in water
or other l iquid, and do not cy cle
through dishwasher
WARN ING
Do not immerse blender base in
water or ot her liquid, and d o not
cycle through dishwasher
Do not imm erse power cor d at
any time.
Do not wet pr ongs of power co rd.
14
Care & Cleaning
Pulse Cleaning
Use Pulse/Clean program to remove superficial food debris and residue from pitcher.
Follow steps 2-8 in “Getting Started” section of this manual.
For stubborn food residue, refer to “Deep Cleaning” section below.
Deep Cleaning
Minerals in water may deposit at the bottom of the pitcher. Periodic deep cleaning will
ensure the blender’s longevity.
1. Add 1 cup (8 oz / 250 mL) white vinegar or citric acid, and 1 cup (8 oz / 250 mL)
of warm water to pitcher.
2. Allow solution to sit for at least one hour.
3. Connect power cord to a 120V power source.
4. Place lid on pitcher and turn lid clockwise until it clicks into place.
Lid braces must fit over glass lid brace catches, located on pitcher.
5. Place pitcher on blender base.
6. Press Pulse/Clean.
7. Press Start/Pause to begin.
8. Allow to air dry before placing lid.
CAUTION
Blades a re sharp. To avoid the risk of severe in jury, unplug blen der before inserting c leaning brush into pitch er.
INSTANT TIP: Stubborn Stains
Follow steps 1 & 2 above. Then, with blender unplugged, scrub with the cleaning brush
or a sponge, and rinse. Repeat as necessary.
15
Troubleshooting
Register your product today at instantappliances.com/support/register
ProblemPossible ReasonSolution
Contents stop blending
while the blender is still
powered on
Smoky smell
Blender will
not power on
Results are
too watery
E01
Error
Indicator
blinks and
error code
appears
on display
E02Thermostat sensor error
E03Dry heat in pitch er
E07Motor is too hotUnplug and allow the blender to co ol before using aga in
• Add liquid to recipe
Content s are too thick
First use – heating of
non-toxic element coating
Motor overheating, may
have run for too long
Motor overheating,
contents may be too thick
Pitcher is not on base Place pitcher correctly on base
Power cord not fully
inserted into outlet
Fuse has blownContac t Customer Care
Too much liquidReduce liquid in recipe
Food is over-processedUse Pulse/Clean to prevent over-blending
Motor overheated , may
have run for too long
Content s may be too thick
• Use th e food tamper to ag itate contents
• Use Pulse/Clean program
No action needed, this is normal and harm less
Press Cancel and wait a few minutes for motor to co ol
• Add thin liquid to pitcher
• Use the tamper to ease blending of thicker food
• Ensure power cord is plugged fully into a 120V outlet
• Check blender on a different outlet
Remove pitcher fro m base and wait a few minutes for
motor to cool
• Remove and re-seat pitcher
• Add thin liquid to pitcher
• Use the tamper to ease blending of thicker foods
• Remove and re-seat pitcher
• Contac t Customer Care
• Allow the blend er to rest for 5 m inutes between
blending hot items and blending cold items
• Remove and re-seat pitcher
• Add liquid when using a hot blending program
“Lid”Lid not secureRemove and reposition the lid on the pitcher
16
Warranty
Warranty
Limited Warranty
This Limited Warranty is effective for one year from the date of original consumer purchase. Proof of
original purchase date and, if requested by an authorized representative of Instant Brands Inc. (“Instant
Brands”), return of your appliance, is required to obtain service under this Limited Warranty. Provided
that this appliance is operated and maintained in accordance with written instruc tions attached to or
furnished with the appliance, Instant Brands will, in its sole and exclusive discretion, either: (i) repair defects
in materials or workmanship; or (ii) replace the appliance. In the event that your appliance is replaced, the
Limited Warranty on the replacement appliance will expire 12 months from the date of original consumer
purchase.
This Limited Warranty ex tends only to the original purchaser and use of the appliance in the
United States of America and Canada. This warranty does not cover units that are used outside of
the United States of America and Canada .
Any modification or attempted modification to your appliance may interfere with the safe operation of
the appliance and will void this Limited Warranty. This Limited Warranty does not apply in respec t of any
appliance or any part thereof that has been altered or modified unless such alterations or modifications
were expressly authorized by an Instant Brands representative.
Limitation and Exclusions
The liability of Instant Brands, if any, for any allegedly defec tive appliance or part shall in no circumstances
exceed the purchase price of a comparable replacement appliance.
This Limited Warranty does not cover:
1. Damage resulting from accident, alteration, misuse, abuse, neglect, unreasonable use, use
contrary to the operating instructions, normal wear and tear, commercial use, improper assembly,
disassembly, failure to provide reasonable and necessary maintenance, fire, flood, acts of God or
repair by anyone unless directed by an Instant Brands Representative;
2. Repairs where your appliance is used for other than normal, personal use or when it is used in a
manner that is contrary to published user or operator instructions; or
3. Use of unauthorized par ts and accessories, or repairs to parts and systems resulting from
unauthorized repairs or modifications made to this appliance.
The cost of repair or replacement under these excluded circumstances shall be borne by you.
17
Warranty
Disclaimer of Implied Warranties
EXCEPT AS EXPRESSLY PROVIDED HEREIN AND TO THE EXTENT PERMITTED BY LAW, INSTANT
BRANDS MAKES NO WARRANTIES, CONDITIONS OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY
STATUTE, USAGE, CUSTOM OF TRADE OR OTHERWISE WITH RESPECT TO THE APPLIANCES OR PARTS
COVERED BY THIS WARRANTY, INCLUDING BUT NOT LIMITED TO, WARRANTIES, CONDITIONS, OR
REPRESENTATIONS OF WORKMANSHIP, MERCHANTABILITY, MERCHANTABLE QUALITY, FITNESS FOR A
PARTICULAR PURPOSE OR DURABILITY.
Some states or provinces do not allow for the exclusion of implied warranties of merchantability or fitness,
so this limitation may not apply to you. In these states and provinces, you have only the implied warranties
that are expressly required to be provided in accordance with applicable law.
Limitation of Remedies;
Exclusion of Incidental and Consequential Damage
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE APPLIANCE REPAIR
OR REPLACEMENT AS PROVIDED HEREIN. INSTANT BRANDS SHALL NOT BE LIABLE FOR INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE APPLIANCE OR DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, PERSONAL
INJURY, LOSS OF PROPERTY, LOSS OF REVENUES OR PROFITS, LOSS OF ENJOYMENT OR USE, COSTS
OF REMOVAL, INSTALLATION OR OTHER INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE OR KIND.
Warranty Registration
Please visit www.instantappliances.com/support/register to register your new Instant Brands™
appliance and validate your warranty within thirty (30) days of purchase. You will be asked to provide
the store name, date of purchase, model number (found on the back of your appliance) and serial number
(found on the bottom of your appliance) along with your name and email address. The registration will
enable us to keep you up to date with product developments, recipes and contact you in the unlikely
event of a product safety notification. By registering, you acknowledge that you have read and
understand the instructions for use, and warnings set forth in the accompanying instructions.
Warranty Service
To obtain ser vice under this warranty, please contact our Customer Service Department by phone
at 1-800- 828-7280 or by email to support@instantapplicances.com. You can also create a suppor t
ticket online at www.instantappliances.com/support. If we are unable to resolve the problem, you
may be asked to send your appliance to the Service Department for quality inspec tion. Instant
Brands is not responsible for shipping costs related to warranty service, save and except for shipping
costs associated with the return of your appliance from Canada or within the 48 contiguous states
and the District of Columbia of the United States of America, as provided herein. When returning your
appliance, please include your name, mailing address, email address, phone number, and proof of the
original purchase date as well as a description of the problem you are encountering with the appliance.