InSinkErator SST-FLTR User Manual

INSTANT HOT WATER DISPENSERS
Model SST-FLTR
Stainless Steel Tank with F-201 Filtration System*
*Water dispenser sold separately
Dimensions
11"
DEPTH IS 6.75"
6.125"
ADJUSTABLE THERMOSTAT
DRAIN PLUG
Submittal Sheet
Stainless Steel Tank dispenses filtered
near-boiling 200°F water instantly.
F-201 Filtration System included for
fresher tasting water
35% more near-boiling water from larger
2
gallon stainless steel tank
3
Easy to adjust temperature control
Tool-free tank connections and dry start protection to ease installation
Provides 60 cups/hour of near-boiling water
3-Year We Come To You™ In-Home Service Warranty*
120 volts, 750 watts, 6.25 amps
For use with In-Sink-Erator Series 1100 and other dispenser models
* The complete In-Sink-Erator warranty is included in the Installation, Care & Use Booklet packed with each unit.
Sample Specification
Capacity: gallon tank dispenses 60 cups of
200°F water per hour
Electrical: 120 volts A.C., 750 watts, 6.25 amp
heating element with grounded three (3) prong plug
Thermostat: Snap action, adjustable from 160°F
to 210°F (factory pre-set at approximately 200°F)
Insulation: Meets U.L. 94HF-1 flammability
specification
Recommended Supply Pressure: 30-125 psi
Shipping Weight: Approximately 4.2 lbs.
To ensure optimum performance, maximum distance between tank and dispenser head should be 16" or less.
2
3
(Not for use with Model Hot1)
Specifications
Capacity
Electrical
Thermostat
Insulation
Recommended Supply Pressure
Shipping Weight
gallon tank dispenses 60 cups of 200
120 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug
Snap-action, adjustable from 160 (factory pre-set at 200
Meets U.L. 94HF-1 flammability specification
30-125 psi
Approximately
4.2 lbs.
º
F water per hour
º
F to 210ºF
º
F)
Job Specifications
©IN-SINK-ERATOR Printed in USA
The Emerson logo is a trademark and a service mark of Emerson Electric Co. In-Sink-Erator is a division of Emerson Electric Co.
Form No. HWD 301-05H-19-12
Loading...