In-Sink-Erator SST-FLTR General Manual

Instant Hot Water Dispensers

Model

SST-FLTR

The Next

Necessity

Dimensions

Stainless Steel Tank dispenses filtered
near-boiling 200˚F water instantly

™

Water dispenser sold separately

Submittal Sheet

• 35% more near-boiling water from
larger 2/3 gallon stainless steel tank

• Easy to adjust temperature control

• Tool-free tank connections and dry start
protection to ease installation

• Provides 60 cups/hour of near-boiling water

• F-201 Filtration System included for
fresher tasting water

- Reduces Chlorine, taste and odor for clean,
refreshing taste

- Sanitary, quick-change filter cartridge
makes replacement easy

• 120 volts, 750 watts, 6.25 amps

• For use with InSinkErator Series 1100
instant hot water dispensers

Specifications

Capacity

Electrical

Thermostat

Insulation

Recommended
Supply Pressure

Shipping Weight Approximately

2/3 gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour

120 volts, A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug

Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)

Meets U.L. 94HF-1
flammability
specification

30-125 psi

7.7 lbs.

"

8 3/4

11"

3 3/4"

6-3/4"

6-1/8"

Job Specifications

Rev. 02/01/2007

Sample Specification

Instant hot water dispenser(s) shall
be equipped with an InSinkErator
Model SST-FLTR stainless steel tank
with filtration, adjustable temperature
from 160°F to 210°F and instant,
self-closing hot valve.

In-Home Parts and Service Warran ty*

Tank: 3-years
Filtration System: 1-year

(excluding replaceable filter cartridge)

* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.

US Pat. D532,497 (tank enclosure)

1-800-558-5700
www.insinkerator.com

Printed in USAHWD301-07B-45-10

The Emerson logo is a trademark and
service mark of Emerson Electric Co.

InSinkErator is a division of
Emerson Electric Co

.

© 2007 InSinkErator