Insinkerator SS-75-11 Service Manual

DISPOSER MOUNTING ASSEMBLIES

SPECIFICATIONS

GRIND CHAMBER - Corrosion Resistant Stainless Steel
MOUNTING - 3/4" rubber mounting above grinding chamber isolates

sound and eliminates vibration. Mounting is enclosed in
chrome plated covers for sanitation and appearance.

MOTOR -

3

/

4 HP Induction Motor, 1725 RPM’s, totally enclosed to

provide protection against outside moisture. Controlled
power air flow cools motor for efficiency and longer life.
Built-in thermal overload protection.

CUTTING ELEMENTS - Stationary and rotating shredding elements made from

cast nickel chrome alloy for long life and corrosion
resistance, designed for reverse action grinding.

MAIN BEARINGS - Double-tapered Timken roller bearings provide a shock

absorbing cushion.

MOTOR SEALS - Triple lip seal protects motor from water damage.

Secondary spring-loaded oil seal provides double
protection against water and loss of grease.

FINISH - All Stainless Steel and Chrome plated. Paint-free for

lasting sanitation.

WARRANTY - 1 year full warranty from date of installation.

© IN-SINK-ERATOR Printed in USA Form No. C173-02E-02

IN-SINK-ERATOR
DIVISION OF EMERSON ELECTRIC COMPANY
4700 21st STREET
RACINE, WI 53406 TEL: [phone] FAX: [phone] www.insinkerator.com

PROJECT: ITEM NO.:

A COMMERCIAL DISPOSER PACKAGE INCLUDES:

1 Mounting/Bowl Assembly, 1 Electrical Control,
1 Syphon Breaker, 1 Solenoid Valve, and 1 Flow Control Valve.
The standard Flow Control Valve will be sent with the unit
unless the optional valve is specified.

BASE DISPOSER/ELECTRICAL REQUIREMENTS

115 volts, 1 phase, 10.0 amps 208 volts, 3 phase, 2.0 amps
208 volts, 1 phase, 4.3 amps 230 volts, 3 phase, 2.4 amps
230 volts, 1 phase, 5.0 amps 460 volts, 3 phase, 1.2 amps

NOTE: All amp ratings denote the amp draw during a grind load.

Select Sink Bowl Assembly Size

12" with one adjustable water nozzle
15" with one adjustable water nozzle
18" with two adjustable water nozzles

Type A Sink
Bowl Assembly*

Type B Sink
Bowl Assembly*

Type C Sink
Bowl Assembly*

*If using Type A, B, or C, you must specify either a 12", 15" or 18" sink bowl.

ELECTRICAL CONTROLS

WATER CONTROLS

Solenoid Valve Syphon Breaker
Flow Control Valve

Recommended Water Usage

Standard Optional

3 GPM N.A.

For additional information, see Commercial Product Information Binder.

Manual
Switch
(Single
Direction)

Manual
Reverse
Switch
(Dual
Direction)

Magnetic
Starter
(Low voltage
model also
available)
(Single
Direction)

CC-202
Control
Centers
(Auto­Reversing)

CC-101
Control
Centers
(Auto­Reversing)

3

/4 H.P. MODEL SS-75

3

/4 H.P. heavy duty disposer is designed for continuous operation in
restaurants, hotels,hospitals and cafeterias. Food waste including
steak bones is quickly and efficiently removed with this labor-saving,
self-cleaning,environmentally sound disposer.

#6 Collar Adapter for
welding into trough,
provides 6

5

/8" opening,

includes splash baffle

#7 Collar Adapter for welding
into sink, provides 6

5

/

8

"
opening, includes splash
baffle and stopper

#5 Sink Flange Mounting
Assemblies for 3

1

/2" - 4"

sink opening

*Support legs are recommended for

this unit when using #5 mounting

AS-101
Control
Center
(includes
Aqua Saver)
(Auto­Reversing)

IN-SINK-ERATOR
DIVISION OF EMERSON ELECTRIC COMPANY
4700 21st STREET
RACINE, WI 53406 TEL: [phone] FAX: [phone] www.insinkerator.com

BOWL
SINKS X Y Z HEIGHT

12" 13 1/2" 12 1/4" 12" 6 1/2"
15" 16 1/2" 15 1/4" 15" 6 1/2"
18" 19 1/2" 18 1/4" 18" 6 1/2"

ADAPTORS X Y Z HEIGHT

No.5 2 3/4"
No.6 7 13/16" 6 7/8" 6 5/8" 1 3/16"
No.7 9 1/8" 7 7/8" 7 5/8" 2 1/16"

Fits Standard Sink

Opening — 3 1/2" — 4"

3

/

4 H.P. COMMERCIAL DISPOSER

SAMPLE SPECIFICATION

ITEM NO. DISPOSER
Quantity: One required (1)
Manufacturer: IN-SINK-ERATOR
Commercial Division, Racine, WI
Model: SS-75-5/CC202
Electrical Requirements: volts/

phase

Install in , Item .

RECOMMENDED
INSTALLATION

MODEL SS-75

IMPORTANT: Use dimension chart below for adaptor height in
place of ISE bowl sink height when mounting directly to a sink.

Z = I.D. OF SINK BOWL

Y = WORK TABLE DIAMETER

65/8"

X = SINK FLANGE O.D.

613/16"

47/8"

63/8"

1

1

/2"

3

3

/8"

61/2"

711/16"

17"

EXTERNAL ELECTRICAL
CONNECTIONS

1/2-14 N.P.T.
WATER INLET

ISE BOWL SINK

NOTE:

• Adaptors are available upon request for all competitor sink bowls or cones.

• Please have sink bowl/cone type with the necessary dimensions when ordering adaptors.

DISPOSER BODY
WATER INLET
(Optional Installation)

WATER
NOZZLE
INLET

1 for 12" & 15" Sink Bowls

( )

2 for 18" Sink Bowls

ELECTRICAL
CONTROLS
(Start/Stop Switch)

PRE-RINSE ASSEMBLY
(Optional Accessory)

SYPHON BREAKER

FLOW
CONTROL
VALVE

INCOMING
ELECTRICAL
POWER

SOLENOID
VALVE

WATER
SHUTOFF VALVE
(Not Supplied)

COLD WATER
SUPPLY