FOOD WASTE
DISPOSERS
Reduces food waste as well as it reduces ineiciency.
Food waste that decomposes in dumpsters creates odors, attracts
pests and serves as a breeding ground for bacteria. Disposers help
keep food waste out of dumpsters. They also reduce sta trips to
the dumpster and waste-hauling costs while increasing kitchen
eiciency and profitability. Bottom line? Food waste disposers play
an important role in saving your operation money.
An idea is built and a brand is born.
The InSinkErator brand was established in 1938. Today, we’re
the world’s largest manufacturer of food waste disposers
for home and commercial use. As the undisputed leader in
disposer quality and reliability, our products are renowned for
maximum energy eiciency and long-lasting durability.
4 sizes. 6 models. Countless opportunities
for productivity.
With four sizes, including six dierent models, we have a
food waste disposer for any size operation. From the light-
duty LC-50 to our large capacity 10 HP workhorse model, all
disposers feature a stainless steel grind chamber, dual-direction
cast iron shredders, and heavy-duty motors for quiet operation
and superior performance.
Switches &
Control Centers
CC-202
MSLV
AS-101
#5 Sink Flange Mounting
Assembly
#6 Collar Adaptor
#7 Collar Adaptor with Splash
Bale and Stopper
Type A
Solenoid Valve
Syphon Breaker
Flow Control Valve
Type B
Type B
#5 Short
MS
CC-101
MRS
Sink & Trough
Mountings
Sink Bowl
Assemblies
Water Controls
Introducing the brains behind
the operation.
Start with a simple on-o switch. Or
select a multi-function control center
that provides automated operations, like
reversing features, and time delay relays
that allow water to continue running aer
the disposer is turned o.
Cut water usage by up to 70%.
AquaSaver senses the load of the disposer
and regulates flow, automatically providing
the right amount of water required for
optimal disposer usage. By saving up to
70% on incoming water and outgoing
sewer charges, AquaSaver pays for itself
in as few as three months.
Adaptability is one of our best
features.
Our disposers include two types of
stainless steel collar adaptors and a sink
flange adaptor to accommodate any size
sink opening. Customize your disposer
and clean up operation by choosing from
a variety of bowl sink assemblies designed
for dish tables or drainboards.
Water controls that control
eicient operation.
Prevent water backflow from syphoning
back into the water line with a Syphon
Breaker. When the water is switched on,
a Solenoid Valve is activated to ensure
water is running through the disposer.
A Flow Control Valve automatically
provides the correct amount of water for
eicient disposer operation.
Create your system by customizing components.
Customize your system by choosing a switch or control center, and a sink or trough collar mounting or sink bowl assembly.
To reduce water usage by up to 70%, consider adding an AquaSaver® control center—our industry exclusive AS-101 control
center can save hundreds of gallons of water each day and includes a free, upgraded 3-year warranty!*
Available in 12", 15"or 18"
A KITCHEN CAN’T RUN AT OPTIMAL
PERFORMANCE UNTIL ITS DISPOSER DOES.
From fast casual and restaurants to healthcare facilities and schools, our food
waste disposers help foodservice operations run at peak performance, enhancing
day-to-day productivity by increasing sta eiciency, reducing operating costs and
improving kitchen sanitation.
An idea is built and a brand is born.
The InSinkErator brand was established in 1938. Today, we’re
the world’s largest manufacturer of food waste disposers
for home and commercial use. As the undisputed leader in
disposer quality and reliability, our products are renowned for
maximum energy eiciency and long-lasting durability.
4 sizes. 6 models. Countless opportunities
for productivity.
With four sizes, including six dierent models, we have a
food waste disposer for any size operation. From the light-
duty LC-50 to our large capacity 10 HP workhorse model, all
disposers feature a stainless steel grind chamber, dual-direction
cast iron shredders, and heavy-duty motors for quiet operation
and superior performance.
Switches &
Control Centers
CC-202
MSLV
AS-101
#5 Sink Flange Mounting
Assembly
#6 Collar Adaptor
#7 Collar Adaptor with Splash
Bale and Stopper
Type A
Solenoid Valve
Syphon Breaker
Flow Control Valve
Type B
Type B
#5 Short
MS
CC-101
MRS
Sink & Trough
Mountings
Sink Bowl
Assemblies
Water Controls
Introducing the brains behind
the operation.
Start with a simple on-o switch. Or
select a multi-function control center
that provides automated operations, like
reversing features, and time delay relays
that allow water to continue running aer
the disposer is turned o.
Cut water usage by up to 70%.
AquaSaver senses the load of the disposer
and regulates flow, automatically providing
the right amount of water required for
optimal disposer usage. By saving up to
70% on incoming water and outgoing
sewer charges, AquaSaver pays for itself
in as few as three months.
Adaptability is one of our best
features.
Our disposers include two types of
stainless steel collar adaptors and a sink
flange adaptor to accommodate any size
sink opening. Customize your disposer
and clean up operation by choosing from
a variety of bowl sink assemblies designed
for dish tables or drainboards.
Water controls that control
eicient operation.
Prevent water backflow from syphoning
back into the water line with a Syphon
Breaker. When the water is switched on,
a Solenoid Valve is activated to ensure
water is running through the disposer.
A Flow Control Valve automatically
provides the correct amount of water for
eicient disposer operation.
Create your system by customizing components.
Customize your system by choosing a switch or control center, and a sink or trough collar mounting or sink bowl assembly.
To reduce water usage by up to 70%, consider adding an AquaSaver® control center—our industry exclusive AS-101 control
center can save hundreds of gallons of water each day and includes a free, upgraded 3-year warranty!*
Available in 12", 15"or 18"
*Standard warranty is 1-year from date of installation. New AquaSaver® control system installations that include a new
Syphon breaker
Control Center
Solenoid Valve
Disposer
Sink Bowl Assembly
Flow Control
Valve
4700 21st Street Racine, WI 53406
T: 800- 845-8345 F: 262-554-3620
www.insinkerator.com/foodservice
F465-16J-95-85
The Emer son logo is a tr ademark and a s ervice ma rk of Emerso n Electric C o.
InSinkErator® may make improvements and/or changes in the specification
at any time, in its sole discretion, without notice or obligation and further
©2016 InSinkErator InSinkEra tor is a busines s unit of Emers on Electr ic Co. All right s reser ved.
For over 75 years, InSinkErator has been helping foodservice operations manage waste
disposal, improve kitchen eiciency and reduce operating costs.
TRUSTED BY FOODSERVICE CONSULTANTS AND EQUIPMENT DEALERS.
Whether you serve 25
or 2,500 people, there is
an InSinkErator disposer
that’s designed for your
operation.
To determine the proper size disposer,
use this recommended sizing chart.
Sizing recommendations are given
in general terms; actual capacities
vary depending on the volume and
type of food waste. LC-50 model
available for light duty commercial
applications, such as coee shops,
convenience stores, or quick service
restaurants.
For questions or special applications,
contact your Foodservice Consultant
or InSinkErator.
Keep your operation
running with expert
service when you need it.
With our comprehensive service
network, you’re assured of prompt,
expert service from over 300 factory-
authorized InSinkErator service
centers nationwide.
For more information,
call 800-845-8345 or visit
www.insinkerator.com/foodservice
From food waste disposers and reduction systems to hot water dispensers and water saving systems,
InSinkErator has a commercial equipment solution to enhance your day-to-day foodservice operations.
TYPICAL INSTALLATION
SINK BOWL
Dish table, plumbing, and electrical connections sold separately.
Uniform
throat opening
of 6–5/8"
Double-tapered
timken roller
bearings
Dual-direction
shredding
elements
Heavy cast iron
stationary and
rotary shredders
Stainless steel
grind chamber
Durable,
heavy-duty
motor
Built smart. Built tough. Built reliable.
Durable construction, superior performance and reliable
dependability make InSinkErator America’s best-selling
food waste disposer.
SS-300
SS-300/
500
SS-500
SS-200 SS-300
SS-300/
500
SS-100 SS-200 SS-300
SS-100 SS-100 SS-200 SS-300
Light
Majority Fruits & Vegetables
Medium
50/50 Mixture
Food Waste Composition
Volume Processed
High
Buet/Cafeteria
Government
Medium
Full Service
Restaurant
Low
Limited Service
Restaurant/Café/
Fast Casual
InSinkErator Commercial Disposer Sizing Chart
Medium Capacity SS-200
DISPOSER CAPACITY / MODELS
Light-Duty LC-50
Small Capacity SS-100
Large Capacity SS-300 SS-500 SS-1000
Switches &
Control Centers
CC-202
MSLV
AS-101
#5 Sink Flange Mounting
Assembly
#6 Collar Adaptor
#7 Collar Adaptor with Splash
Bale and Stopper
Type A
Solenoid Valve
Syphon Breaker
Flow Control Valve
Type B
Type B
#5 Short
MS
CC-101
MRS
Sink & Trough
Mountings
Sink Bowl
Assemblies
Water Controls
Introducing the brains behind
the operation.
Start with a simple on-o switch. Or
select a multi-function control center
that provides automated operations, like
reversing features, and time delay relays
that allow water to continue running aer
the disposer is turned o.
Cut water usage by up to 70%.
AquaSaver senses the load of the disposer
and regulates flow, automatically providing
the right amount of water required for
optimal disposer usage. By saving up to
70% on incoming water and outgoing
sewer charges, AquaSaver pays for itself
in as few as three months.
Adaptability is one of our best
features.
Our disposers include two types of
stainless steel collar adaptors and a sink
flange adaptor to accommodate any size
sink opening. Customize your disposer
and clean up operation by choosing from
a variety of bowl sink assemblies designed
for dish tables or drainboards.
Water controls that control
eicient operation.
Prevent water backflow from syphoning
back into the water line with a Syphon
Breaker. When the water is switched on,
a Solenoid Valve is activated to ensure
water is running through the disposer.
A Flow Control Valve automatically
provides the correct amount of water for
eicient disposer operation.
Create your system by customizing components.
Customize your system by choosing a switch or control center, and a sink or trough collar mounting or sink bowl assembly.
To reduce water usage by up to 70%, consider adding an AquaSaver® control center—our industry exclusive AS-101 control
center can save hundreds of gallons of water each day and includes a free, upgraded 3-year warranty!*
Available in 12", 15"or 18"
*Standard warranty is 1-year from date of installation. New AquaSaver® control system installations that include a new
disposer and new AS-101 control center are eligible for a 3-year warranty on the entire system, including disposer.
Syphon breaker
Control Center
Solenoid Valve
Disposer
Sink Bowl Assembly
Flow Control
Valve
TRUSTED BY FOODSERVICE CONSULTANTS AND EQUIPMENT DEALERS.
Whether you serve 25
or 2,500 people, there is
an InSinkErator disposer
that’s designed for your
operation.
To determine the proper size disposer,
use this recommended sizing chart.
Sizing recommendations are given
in general terms; actual capacities
vary depending on the volume and
type of food waste. LC-50 model
available for light duty commercial
applications, such as coee shops,
convenience stores, or quick service
restaurants.
For questions or special applications,
contact your Foodservice Consultant
or InSinkErator.
Keep your operation
running with expert
service when you need it.
With our comprehensive service
network, you’re assured of prompt,
expert service from over 300 factory-
authorized InSinkErator service
centers nationwide.
For more information,
call 800-845-8345 or visit
www.insinkerator.com/foodservice
For over 75 years, InSinkErator has been helping foodservice operations manage waste
disposal, improve kitchen eiciency and reduce operating costs.
InSinkErator Commercial Disposer Sizing Chart
High
Buet/Cafeteria
Government
Medium
Full Service
Restaurant
Volume Processed
Low
Limited Service
Restaurant/Café/
Fast Casual
Majority Fruits & Vegetables
SS-300
SS-200 SS-300
SS-300/
500
SS-500
SS-300/
500
SS-100 SS-200 SS-300
SS-500/
1000
SS-500
SS-300/
500
SS-100 SS-100 SS-200 SS-300
Light
Medium
50/50 Mixture
Food Waste Composition
TYPICAL INSTALLATION
SINK BOWL
SS-500/
1000
SS-500/
1000
SS-500
SS-300/
500
Heavy
Majority Meats & Seafood
YEA R
ON - SITE
PARTS & L ABOR
WA RR ANT Y
Dish table, plumbing, and electrical connections sold separately.
From food waste disposers and reduction systems to hot water dispensers and water saving systems,
InSinkErator has a commercial equipment solution to enhance your day-to-day foodservice operations.
4700 21st Street Racine, WI 53406
T: 800- 845-8345 F: 262-554-3620
www.insinkerator.com/foodservice
F465-16J-95-85
The Emer son logo is a tr ademark and a s ervice ma rk of Emerso n Electric C o.
InSinkErator® may make improvements and/or changes in the specification
at any time, in its sole discretion, without notice or obligation and further
©2016 InSinkErator InSinkEra tor is a busines s unit of Emers on Electr ic Co. All right s reser ved.
reser ves the r ight to change or dis continue mo dels.
Loading...