InSinkErator Invite H770-SS Specifications

6-3/8

"

4-3/8"

11"

6-1/8"

6-3/4"

NOTE: Max counter thickness is 3/4".

2-1/2"

Minimum 2" required
from sink hole center
to backsplash

1/4" Incoming
Water Supply

Inl et Tube

Flexible
Outlet Tube

Flexible
Ven t Tube

The Next

Necessity

™

Submittal Sheet

Job Specifications

HWD389-11F-45-02

• Hot Only – Dispenses near-boiling 200°F

• 35% more near-boiling water from larger
2/3-gallon stainless steel tank

• Easy to adjust temperature control

• Tool-free tank connections and dry start
protection to ease installation

• Provides 60 cups/hr of near-boiling water

• 3-Year In-Home
Service Warranty*

• 115 volts, 750 watts, 6.25 amps

• Available in chrome with black handle

Specifications

Capacity

Electrical

Thermostat

Insulation

Valve

Shipping Weight

Recommended
Supply Pressure

Required
Hole Diameter

2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour

Snap-action,
adjustable from

160˚F to 210˚F

(factory pre-set
at 200˚F)

Meets U.L. 94HF-1
flammabiltiy
specification

Instant, self-closing

30-125 psi

Approximately

7.4 lbs.

1-1/4" – 1-1/2"
standard sink hole

115 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug

Printed in USA

1-800-558-5700
www.insinkerator.com

The Emerson logo is a trademark and

service mark of Emerson Electric Co.

InSinkErator may make improvements and/or

changes in the specifications at any time, in its sole

discretion, without notice or obligation and further

reserves the right ot change or discontinue models.

© 2011 InSinkErator, a division of

Emerson Electric Co. All Rights Reserved.

The original instant hot water
dispenser with easy-to-twist handle

Instant Hot Water Dispensers

H770-SS

Complies with Lead Plumbing Law

We Come To You

®

Dimensions

Sample Specification

Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with
2/3-gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.

Warranty:

3-year parts and in-home service.

* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.

US Pat. D532,497 (tank enclosure)