Insinkerator AS-101K-5 User Manual

PROJECT: ITEM NO.:

CONTROL CENTER MODEL AS-101

WATER SAVING CONTROL CENTER

WATER SAVING FEATURES

• The AquaSaver® control center provides an on-demand water-saving
system for InSinkErator foodservice disposers

• The AS-101 control center senses the load of the disposer and regulates
the amount of water necessary for grinding and non-grinding situations

SPECIFICATIONS

STAINLESS STEEL ENCLOSURE

• NEMA 4

• Stainless steel construction

• Easy to clean and keep clean

AUTOMATIC REVERSING CONTROL

• Reverses direction of motor at each startup

• Increases cutting element life and reduces jams

REVERSING DELAY

• Disposer will not reverse while motor is in motion

• Protects motor from burn out from operator misuse

AUTOMATIC DROP OUT SYSTEM

• If a power loss occurs, control will automatically disengage
power lines

• Disposer must be restarted

DISCONNECT SWITCH

• Disconnects electrical power beyond switch for service

• Interlock with front cover

SOLID STATE CONTROL

• Operates on 24V

SOLID STATE CONTROL CIRCUIT

• Printed circuit board with control diagnostic/function lights, delay
timers and timed run pin and reversing control

POST WATER FLUSH

• Adjustable timer allows water to run automatically for up to
10 minutes, flushing disposer and drain lines after disposer is shut off

TIMED RUN OR CONTINUOUS RUN

• Selected at your discretion, simply by moving the plug-in pin on the
printed circuit board

• Timed run shuts off disposer automatically after 10 minutes

• Can be shut off manually any time

SOLENOID VALVE/FLOW CONTROL VALVE

• Two 24V solenoid valves included

• 1 GPM (3.8 LPM) and 7 GPM (26.5 LPM) flow control valves included

WARRANTY

• Standard warranty is 3 years from date of installation.

DIMENSIONS

9-7/8”

(250.8 mm)

8-1/4”

(209.6 mm)

(384.2 mm)

14”

(355.6 mm)

15-1/8”

15-3/4”

(400.1 mm)

1”

(25.4 mm)

VOLTAGE/PHASE AVAILABILITY

Model Voltage/Hz Phase Disposer Models

AS101K-5 120V, 50/60 Hz 1 Ph SS-50 to SS-200

AS101K-6 208-240V, 50/60 Hz 1 Ph SS-50 to SS-200

AS101K-7 208-240V, 50/60 Hz 3 Ph SS-50 to SS-1000

AS101K-8 380-460V, 50/60 Hz 3 Ph SS-50 to SS-1000

4700 21st STREET
RACINE, WI 53406
TEL: [phone]
FAX: [phone]

www.insinkerator.com

InSinkErator is a business unit of Emerson Electric Co.

A complete collection of our product drawings is available
for download at the InSinkErator Revit/CAD Library, which
can be found at www.insinkerator.com/foodservice. Product
information is also accessible on The KCL CADalog. More
information is available from KCL at www.kclcad.com.

The Emerson logo is a

trademark and a ser vice mark

of Emerson Electric Co.

InSinkErator ©2014 Printed in USA For m No. F456-14K-89 -85

5-5/16”

(134.9 mm)

6-3/4”

(171.5 mm)

TYPICAL TROUGH MOUNT APPLICATION

TYPICAL BOWL MOUNT APPLICATION

NOTE: The AquaSaver® control center should be mounted 1-1/2” (38.1 mm) back from the front surface of the table.

AS-101 FEATURES

Automatic
Reversing

Magnetic

Contactors

Post Water

Timed Run or

Continuous

Solid State

Flush

Run

Control
Circuit

AquaSaver

Sensor
Module

Transformer

Line

Disconnect

Switch

Stainless

Steel

Enclosure