Insinkerator AS-101 User Manual

PROJECT: ITEM NO.:

9-7/8"

CONTROL CENTER MODEL AS-101

WATER SAVING CONTROL CENTERS

WATER AND ENERGY SAVING FEATURES

• The Aqua Saver System acts as an on-demand water-saving system
for InSinkErator foodservice disposers

• The AS-101 Control senses the load of the disposer and regulates the
amount of water necessary for grinding and non-grinding situations

SPECIFICATIONS

STAINLESS STEEL ENCLOSURE

• NEMA 4

• Waterproof construction

• 18 gallon ( 68.1 liters) stainless steel

• Easy to clean and keep clean
AUTOMATIC REVERSING CONTROL

• Reverses direction of motor at each startup

• Increases cutting element life and reduces jams
REVERSING DELAY

• Disposer will not reverse while motor is in motion

• Protects motor from burn out from operator misuse
AUTOMATIC DROP OUT SYSTEM

• If a power loss occurs, control will automatically disengage
power lines

• Disposer must be restar ted
DISCONNECT SWITCH

• Disconnects electrical power beyond switch for service

• Interlock with front cover
SOLID STATE CONTROL

• Operates on 24V
SOLID STATE CONTROL CIRCUIT

• Printed circuit board with control diagnostic/function lights, delay
timers and timed run pin and reversing control

POST WATER FLUSH

• Adjustable timer allows water to run automatically for up to
10 minutes, flushing disposer and drain lines after disposer is shut off

TIMED RUN OR CONTINUOUS RUN

• Selected at your discretion, simply by moving the plug-in pin on the
printed circuit board

• Timed run shuts off disposer automatically after 10 minutes

• Can be shut off manually any time
SOLENOID VALVE/FLOW CONTROL VALVE

• Two 24V solenoid valves included

• 1 GPM (3.8 LPM) and 7 GPM (26.5 LPM) flow control valves included
WARRANTY

• Standard warranty is 1-year from date of installation. New
installations that include a new disposer and new Aqua Saver
model AS-101 control panel or AS module, are eligible for an
additional 2-year warranty extension (3 years total) for the entire
system, including disposer!

DIMENSIONS

(250.8 mm)

8-1/4"

(209.6 mm)

(384.2 mm)

14"

(355.6 mm)

15-1/8"

15-3/4"

(400.1 mm)

1"

(25.4 mm)

VOLTAGE/PHASE AVAILABILITY

Model Voltage /Hz Phase

AS101K-1 120V, 50/ 60 Hz 1 Ph

AS101K-2 208-240V, 50/60 Hz 1 Ph

AS101K-3 208-240V, 50/60 Hz 3 Ph

AS101K-4 380-460V, 50/60 Hz 3 Ph

4700 21st STREE T
RACINE, WI 53406
TEL: [phone]
FAX: [phone]

www.insinkerator.com /foodservice

InSinkErator is a division of Emerson Electric Co.

(134.9 mm)

6-3/4"

(171.5 mm)

Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Librar y. More information is available from
Kochman Consultants, Ltd. at www.kclcad.com.

The Emerson logo is a

trademark and a service mark

of Emerson Electric Co.

InSink Erator ©20 11 Pr inted in USA F orm No. F22 8-11D-45- 02

5-5/16"

TYPICAL TROUGH MOUNT APPLICATION

TYPICAL BOWL MOUNT APPLICATION

NOTE: The Aqua Saver control center should be mounted 1-1/2" (38.1 mm) back from the front surface of the table.

AS-101 FEATURES

Automatic

Reversing

Magnetic

Contactors

Post Water

Timed Run or

Continuous

Solid State

Flush

Run

Control

Circuit

Aqua-Saver

Sensor

Module

Transformer

Line

Disconnect

Switch

Stainless

Steel

Enclosure