Insignia NS-TADPT1, NS-TADPT1-C User Manual
Package contents
• Travel adapter
• Quick Setup Guide
Before using your new product, please read
these instructions to prevent any damage.
Check out these important safety
BE
CAREFUL!
instructions to keep yourself and
your devices safe.
• READ ALL INSTRUCTIONS BEFORE USING.
• DO NOT use this adapter with products containing screw-base sockets
or convenience receptacles.
• THIS PRODUCT IS NOT A VOLTAGE CONVERTER. Use this adapter only if
the power outlet voltage is within the range of your device’s voltage.
Using this adapter with an incompatible device and power outlet
may result in a risk of re, electric shock, injury to persons, or damage
to the device.
• Always attach the adapter to the device plug rst, then insert the
adapter into the power outlet.
• Always disconnect the adapter and the device from the power outlet
when not in use.
• To replace the fuse, use a new fuse with an identical size and rating to
the default fuse spec.
• No grounding. This product is for use with an unearthed or
double-insulated device only.
• This product should not be used with hair dryers or other high
wattage devices. Check your device label to make sure it does not
require more than 6A.
Warning: This product is intended for adult use. This product is NOT intended for use
by unsupervised children. Choose the proper settings and plug in this product before
directly supervising children using devices connected to this product. Intended for use
outside of USA and Canada.
Travel Adapter | NS-TADPT1 / NS-TADPT1-C
Making sure your device is compatible
1 Determine the voltage of the power outlet you want to use.
See the table on the next page for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet. You can nd the voltage information on your
device, on its power adapter, or in its manual.
3 Compare the power outlet voltage to your device’s voltage.
Notes:
• The voltage of some devices will be a range (for example,
a 120-240V device and a 240V power outlet).
• If your device has a dual voltage switch, slide it to the
correct voltage.
The power outlet voltage is:
• The same as your device’s voltage
• In the range of your device’s
voltage
• 100V and your device is 120V
• Greater than your device’s
voltage
• Less than your device’s voltage*
*Note: If the power outlet is 100V and your device is 120V, you may
use the adapter.
Instructions:
See step 4 to check
wattage compatibility.
NOT compatible. You
must purchase a
converter to power
your device.
Quick Setup Guide
4 Find the the power outlet voltage in the table.
• If your device’s wattage is less than or equal to the corresponding
max device wattage, you may use this adapter with your device.
• If your device’s wattage is greater than the corresponding max
device wattage, your adapter is NOT compatible. You must
purchase a converter to power your device.
Power outlet voltage:
100V
120V
240V
Max device wattage:
approx. 600W
720W
approx. 1380W
Plug types Location
Outlet types
Japan
Parts of North America and
Flat parallel
blades
Caribbean
Parts of South America,
Caribbean, and China
Parts of Middle East, Africa,
Asia, South America
Round pins
Europe, parts of Middle East,
Africa, Asia, South America
Northern Europe
Flat angled
blades
Australia, New Zealand, and
Fiji
Great Britain, Ireland, parts of
Africa, Hong Kong, and
3-prong
Singapore
blades
Voltage
100V
120V
240V
120V
240V
240V
240V
240V
Using your adapter
1 Make sure your device is compatible before use. Incorrect use
could damage your device.
2 Find the power outlet you want to connect your device to in
the table on the previous page, then choose the adapter that
will t that outlet.
3 Make sure all plugs are COMPLETELY retracted, then push in
and slide forward the button that corresponds with your plug.
Caution: Do not open multiple plugs at the same time.
4 Connect the adapter to your device,
then to a power outlet. Use or charge
your device as usual.
Replacing the fuse
Note: Replace only with a
UL certied 6.3A/250V AC fuse.
1 Unscrew the fuse cover.
2 Remove the broken fuse.
3 Install the new fuse, then replace
the fuse cover.
Specications
• AC Power Rating: 6A max.100-240V AC (660W max. at
110V, 1380W max. at 230V)
• Built-In 6.3A replaceable fuse
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 14-0291
Loading...