Insignia NS-SPBTWAVE2, NS-SPBTWAVE2-XX User Manual

QUICK SETUP GUIDE

Portable Bluetooth Speaker

NSSPBTWAVE2 / NSSPBTWAVE2XX

PACKAGE CONTENTS

• Bluetooth speaker • USB cable • Quick Setup Guide

FEATURES

• Wirelessly stream from any Bluetooth device

• Rechargeable battery lasts up to 12 hours

• Speakerphone for hands-free calling

• Rubber feet support a horizontal or vertical orientation

Front view Back view

Volume +/-

buttons

Call button

LED indicator

Power button

Rubber

feet

AUX IN jack

Reset hole

Micro USB port

Before using your new product, please read these instructions to prevent any damage.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this speaker near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

• Only use attachments/accessories specied by the manufacturer.

• Unplug this speaker during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required when the speaker has been damaged in any way, such as if the speaker is dropped, exposed to liquids, or does not operate normally.

• Never expose the product to re as this could result in personal injury.

• Do not store the product in an extremely cold or warm environment.

• Never dismantle the product.

• Never let children play with the product.

• Do not expose the product to dampness or moisture.

• The product should not be exposed to dripping or splashing.

Note: The battery in this speaker cannot be replaced by the user.

CHARGING YOUR SPEAKER

1 Connect the small end of the charging cable to the micro USB port on

the back of your speaker.

2 Connect the other end to a USB port on your computer or wall adapter

(not included). The LED indicator is red while charging, then turns o when the speaker is fully charged.

Note: The speaker beeps continually when the battery is low. About ve minutes later, the speaker turns o automatically.

CONNECTING AN AUDIO DEVICE

Bluetooth 1 Press and hold (power) to turn on your speaker. The LED indicator

blinks blue quickly and your speaker automatically enters pairing mode.

2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your

speaker.

3 Turn on your Bluetooth device, turn on Bluetooth, then enter pairing

mode. For more information, see the documentation that came with your Bluetooth device.

4 On your Bluetooth device, select NS-SPBTWAVE2. Your speaker pairs

with your Bluetooth device and the LED indicator lights solid blue.

5 To disconnect, un-pair your Bluetooth device from your speaker. OR Press and hold (call) for three seconds on your speaker. Your

Bluetooth devices loses connection automatically.

Audio cable

• Connect a 3.5 mm audio cable (not included) from your speaker’s AUX jack to your audio device’s headphone/audio out jack.

The LED indicator blinks blue slowly while connected to an audio

cable.

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the LED blinks blue.

Your speaker loses the Bluetooth connection if you...

Turn o your speaker.

Move the Bluetooth device out of range.

Turn o your Bluetooth device.

Turn o Bluetooth on your Bluetooth device.

Connect your Bluetooth device to another Bluetooth device.

Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal has to pass through walls or other obstructions.

To reconnect...

Turn on your speaker. Your speaker searches for the last connected Bluetooth device and reconnects.

Make sure that your Bluetooth device is within 33 feet of your speaker.

Turn on your Bluetooth device, then make sure that Bluetooth is on.

Turn on Bluetooth on your Bluetooth device.

Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select NS-SPBTWAVE2 on your Bluetooth device.

USING YOUR SPEAKER

Listening to audio 1 Connect to your speaker with Bluetooth or an audio cable. 2 Play audio on your connected device. 3 Press + or - to adjust your speaker’s volume.

Note: Make sure that your connected device’s volume is set to at least 50%.

4 Use the controls on your connected device to control playback.

TAKING A PHONE CALL

Using your speaker

The following functions are available when paired to a phone with Bluetooth:

• Reject an incoming call: Press and hold (call).

• Answer an incoming call: Press (call).

• Switch audio between your speaker and phone: Press and hold (call).

• End current call: Press (call).

• Redial the last dialed number: Press (call) twice.

LED indicator

LED

Blinks blue quickly

Lights solid blue

Blinks blue slowly

Lights red

FUNCTION

Bluetooth pairing mode

Paired to a Bluetooth device

Connected to an AUX device

Speaker is charging (charging complete when LED turns o)

SPECIFICATIONS

• Dimensions (H × W × D):

6.77 × 2.75 × 2.75 in. (17.2 × 7 × 7 cm)

• Battery size: 2,000 mAh

• Wattage: 3W

• USB cable length: 11.8 in. (30 cm)

• Range: 33 ft. (10 m)

• Run time: 12 hours

• Charge time: 4.5 hours

• Weight: 1.01 lbs. (0.46 kg)

TROUBLESHOOTING LEGAL NOTICES

PROBLEM

No power

No sound or low volume

Cannot establish Bluetooth connection

My Bluetooth device keeps unpairing

“NS-SPBTWAVE2” does not appear on my Bluetooth device

Poor sound quality

SOLUTION

• Make sure that your speaker’s battery is charged.

• Make sure that your speaker is turned on.

• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and NS-SPBTWAVE2 is selected.

• Turn up the volume on your speaker and Bluetooth device. Make sure that your Bluetooth device is not muted.

• Make sure that your speaker is not paired to another Bluetooth device.

• Make sure that your Bluetooth device is not paired to another Bluetooth device.

• Shorten the distance between your speaker and your Bluetooth device.

• Make sure that your speaker is in pairing mode. Press and hold the (call) button to reenter pairing mode.

• Shorten the distance between your speaker and your Bluetooth device.

• Turn your devices o, then on. Re-pair your speaker and your Bluetooth device.

• Make sure that your speaker is not paired to another Bluetooth device.

• Make sure that your speaker and Bluetooth device are both in pairing mode.

• Make sure that your Bluetooth device supports Bluetooth v4.0 and below.

• Make sure that your Bluetooth device is not connected to any other device.

• Make sure that you have selected NS-SPBTWAVE2 on your Bluetooth device.

• Disconnect any audio cables connected to your speaker’s AUX jack.

• Shorten the distance between your speaker and your Bluetooth device.

• If the battery on your Bluetooth device is low, recharge the battery.

• If the battery on your speaker is low, recharge the battery.

• Shorten the distance between your speaker and your Bluetooth device.

• Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.

• Move your speaker and Bluetooth device closer together.

• Try a dierent music source.

• Pair your speaker to a dierent mobile device.

• Try changing the volume on your and music source.

FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try correct the interference by one or more of the following measures:

- Reorient the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the user’s authority to operate the equipment.

RSS IC Statement

This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicable s aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suiv antes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accept er tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en comprom ettre le fonctionnement.

IFETEL Statement

La operación de este equipo está sujeta a las siguientes dos condiciones: 1. es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su propia operación no deseada.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada) 01-800-926-3000 (Mexico) www.insigniaproducts.com

Made in China

V3 ENGLISH 17-0900