Insignia NS-SPBT02-Y-C, NS-SPBT02-G-C, NS-SPBT02-BL-C, NS-SPBT02-P-C User Manual
Bluetooth Speaker
|
NS-SPBT02-Y-C/NS-SPBT02-G-C/NS-SPBT02-BL-C/NS-SPBT02-P-C
Quick Setup Guide
Package contents
• Bluetooth portable speaker
• Micro USB charging cable
• Quick Setup Guide
Features
• Travel hook for added portability
• Connects to your Bluetooth devices
• Embedded 3.5 mm audio cable
• Rechargable battery
Before using your new product, please read
these instructions to prevent any damage.
Top view
Bottom view
Travel hook
LED indicator
Micro USB
charging port
3.5 mm
audio cable
Power switch
Charging your speaker
When the battery is low, the LED blinks red quickly
and the speaker will have about 10 minutes of
battery life left.
• Connect the small end of your charging cable to
the micro-USB port on your speaker, then
connect the other end to an available USB port
on your computer.
CHARGING
Speaker is o
Speaker is on
Note: While searching for a wireless connection, the LED
will blink red and blue quickly.
LED is red
LED is purple
NOT CHARGING
LED is o
LED is blue
Turning your speaker on and o
• Slide the power switch to turn your speaker ON or
OFF. The blue LED turns on or o.
Connecting with the audio cable
• Plug the 3.5 mm audio cable into the audio jack
on your audio device.
• When nished, put the 3.5 mm cable back into the
bottom of your speaker for storage.
Connecting with Bluetooth
Note: The Bluetooth range is 33 feet (10 meters).
1 Slide the power switch to ON. Your speaker enters
paring mode and the LED blinks red and blue
quickly.
2 Navigate to your device’s Bluetooth settings, turn
on Bluetooth, then search for available devices.
3 Select NS-SPBT02 from the list of available
devices on your Bluetooth device. The LED lights
solid blue when your device is paired.
Note: For more information on entering pairing mode, see
the instructions that came with your Bluetooth device.
4 To unpair, turn o Bluetooth on your Bluetooth
device.
LED
LED blinks blue slowly
LED blinks red and blue quickly
LED lights solid blue
Note: The LED lights solid purple when the speaker is paired
and charging.
DESCRIPTION
Speaker is not connected
Speaker is in pairing mode
Speaker is paired
Using your speaker
• Use your audio or Bluetooth device to play, pause,
select tracks, and adjust the volume.
• Use the travel hook to attach the speaker to a bag
or other location.
• If you have devices connected with both an audio
cable and Bluetooth, you will only hear audio from
the Bluetooth device. Unpair your speaker to hear
audio from the device connected with the audio
cable.
Troubleshooting
My speaker won’t pair or keeps unpairing:
• Shorten the distance between your speaker and
Bluetooth device.
• Charge the battery of your speaker or Bluetooth device
if it is low. This may also improve sound quality.
• Make sure that your speaker and Bluetooth device
are both in pairing mode.
• Make sure that your Bluetooth device supports the
Bluetooth v3.0 prole.
• Make sure that your Bluetooth device is not
connected to any other device.
• Make sure that you have selected NS-SPBT02 on
your Bluetooth device.
My sound is distorted:
• Your battery may be low. Charge your battery.
• If paired to a Bluetooth device, move your audio
device closer to your speaker.
• Make sure the 3.5 mm cable is rmly connected to
your audio device.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V3 ENGLISH 14-0296
Loading...