Insignia NS-SP1X7, NS-SP1X7-C User Manual

QUICK SETUP GUIDE

Wi-Fi Smart Plug

NS-SP1X7 / NS-SP1X7-C

SYSTEM REQUIREMENTS

• Home Wi-Fi network

• Connect app (free download at connect.bestbuy.com/setup)

The Connect app tracks status information for all your Insignia smart home devices in one place. Signing into a Best Buy account is required for remote access and to keep your data secure.

• iOS 10 or later

• Android 6.0.1 Marshmallow or later

ELECTRICAL RATINGS

• Electrical rating: 15A, 120Vac, 60Hz

• Resistive: 1800W

• Tungsten: 960W

Before using your new product, please read these instructions to prevent any damage.

SETTING UP & USING YOUR SMART PLUG

1 Connect your mobile device to a Wi-Fi network. 2 Type connect.bestbuy.com/setup in the search bar of your device’s

browser and follow the on-screen instructions to download the app.

3 Open the Connect app, then log in or sign up for a Best Buy account.

Note: If you plan to access your Smart Plug on multiple devices, you must

sign into the same Best Buy account on each device.

4 Plug the Smart Plug into an outlet. A blinking green LED means it’s

ready for setup.

Notes:

• If LED is not blinking, do a factory reset. See Troubleshooting.

• Do not plug your Smart Plug into a surge protector or a wall outlet controlled with a switch. The plug must always have power.

5 To connect to your Smart Plug:

• Android: Tap Set up new device and follow the on-screen instructions.

• iOS: Tap Setup new device, then press your device's home button and open the Settings app. Tap Wi-Fi , and then tap the network named Insignia - XXXXXXX. Your iPhone automatically reopens the Connect app to continue setup. Follow the on-screen instructions.

6 Plug a fan, coee maker, decorative lights, and more into the plug

and control it from the app, or use the button on the Smart Plug. You can also use the Smart Plug to set a schedule for your device.

FEATURES

• Press once to turn the plug on or o

• Lights up when the Smart Plug is on and electricity is owing through it

• Flashing green: searching for/disconnected

Power button Power and Wi-Fi status indicators

disabled in the app

from a Wi-Fi network

• Solid green: connected to a Wi-Fi network and plug is on

• No LED: outlet is o or LED has been

SAFETY INFORMATION

• Plug directly into an electric outlet (not into an extension cord)

• For indoor use only

• Remove the Smart Plug from the outlet before cleaning

• Keep children away from the Smart Plug and the outlet

• Test the device locally for safe operation before attempting to control it remotely

• DO NOT use with medical or life support equipment.

• DO NOT clean with liquid

• DO NOT remove the ground pin (middle pin)

• DO NOT use in wet or damp areas

• DO NOT exceed the recommended electrical ratings

• DO NOT use in precision timing applications where inaccurate timing could be dangerous, such as sunlamps or saunas.

• DO NOT use with devices that should not be operated unattended

• DO NOT use with an outlet controlled by a wall switch as the switch may be turned o

• Operating ambient temperature: 0° to 40°

TROUBLESHOOTING ONEYEAR LIMITED WARRANTY

PROBLEM

The app or Wi-Fi cannot nd the Smart Plug.

I can’t turn devices on or o with the app.

I can't congure the Smart Plug

LED does not turn On.

How do I do a Factory Reset?

SOLUTION

• Make sure that your mobile device and the Smart Plug are connected to the same Wi-Fi network and your network is working properly.

• Reset your Smart Plug. Press and hold for 10 seconds (LED will ash green and the Smart Plug will reset upon release).

• Make sure the devices you connected to the Smart Plug are set to the on position.

• Make sure your mobile device and the Smart Plug are connected to the same Wi-Fi network.

• Reset the smar t plug to factory defaults, then follow the initial setup instructions again.

• Press and hold for 10 seconds to reset (LED ashes green and the Smart Plug resets upon release). Use the app to recongure network settings.

• Reset the smar t plug to factory defaults, then follow the initial setup instructions again.

Make sure the LED is not deactivated in the app

Unplug the Smart Plug, then press and hold the power button. Continue holding the button, plug the Smart Plug into an outlet, then release the button when you hear a click (about 4 seconds). The LED will be solid.

LEGAL NOTICES

CAN ICES-3 (B)/NMB-3(B) FCC Label Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

To assure continued FCC compliance:

1. Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet appareil radio est conforme au CNR-247d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

FCC Verication

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To assure continued FCC compliance:

Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada) • 01-800-926-3000 (Mexico) www.insigniaproducts.com

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google Inc.

Made in China

V7 ENGLISH 17-0598