56” Cherry Finish and
Glass TV Stand
for TVs up to 58” and 154 lbs.
NS-MG302FMS
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS....2
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................4
ASSEMBLY INSTRUCTIONS.........................................5
CARE AND MAINTENANCE...................................... 13
Before using your new product, please read these instructions to prevent any damage.
CHERRY FINISH AND GLASS TV STAND
Maximum weight: 154 lbs. (69.9 kg)
Maximum width: 1-inch overhang on each side of
the top shelf
Overall dimensions (W × H × D):
56 × 17 × 21" (142.2 × 43.18 × 53.34 cm)
56" (142.24 cm)
17" (43.18 cm)
21" (53.34 cm)
18.5" (46.99 cm)
Phillips screwdriver
Drill
SAFETY INFORMATION AND SPECIFICATIONS
CAUTION: The top surface of this stand
is designed for use with a product
weighing no more than
154 lbs. (69.9 kg) and having a width
that permits it to sit evenly on the
stand with no more than a one-inch overhang on
each side of the shelf. Use with products that weigh
more than the maximum weight allowed, or with
dimensions that extend beyond the maximum
width may result in instability, which may result in
injury.
CAUTION: This product contains small
items that could be a choking hazard if
swallowed.
Keep these items away from young
children!
Do not lift the glass by the support posts. See
instructions for more details.
Model #: NT-MG302FMS
Tools needed:
(For optional tipping restraint hardware only)
2
www.insigniaproducts.com
CHERRY FINISH AND GLASS TV STAND
A Stand body (1)
B Top glass shelf (1)
C Middle glass shelf (1)
D Bottom glass shelf (1)
PACKAGE CONTENTS: PARTS
www.insigniaproducts.com
3
PACKAGE CONTENTS: HARDWARE
Label Hardware Qty.
E2
F2
G2
An optional anti-tipping hardware kit is included.
Instructions on how to install the hardware are
included on the bag containing the kit. You can
use the touch-up marker to cover minor scratches
after you install the kit.
Label Hardware Qty.
H2
I11
J1
Note: You may receive extra hardware.
Make sure you have all the hardware necessary to assemble your new TV stand:
CHERRY FINISH AND GLASS TV STAND
4
1234in
10 20 30 40 50 60 70 80 90 1 00mm
www.insigniaproducts.com
CHERRY FINISH AND GLASS TV STAND
ASSEMBLY INSTRUCTIONS
Step 1: Unfold the body
• Unfold the stand body (A), then insert the two large thumbscrews (E) into the right side of the rear panel.
You’ll need:
www.insigniaproducts.com
5