Insignia NS-MG1158 User Manual
NS-MG1158_14-1390_MAN_V2_ENG.fm Page 1 Monday, December 15, 2014 8:21 AM
V2
FINAL
FOR PRINT
Quick-Setup Glass
and Metal TV Stand
NS-MG1158
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS....2
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................4
ASSEMBLY INSTRUCTIONS.........................................5
CARE AND MAINTENANCE...................................... 11
Before using your new product, please read these instructions to prevent any damage.
Maximum weight: 300 lbs. (136 kg)
Maximum width: 1-inch overhang on each side
of the top shelf
Overall dimensions (W × H × D):
58 × 24 × 20" (147.32 × 60.96 × 50.8 cm)
Top shelf (W × D):
58 × 20" (147.32 × 50.8 cm)
Middle shelf (W × H × D):
48.75 × 10 × 18" (123.82 × 24.5 × 45.72 cm)
Bottom shelf (W × H × D):
42.75 × 10.13 × 17.13" (108.58 × 25.73 × 43.51 cm)
38" (96.52 cm)
20" (50.8 cm)
24" (60.96 cm)
54.5" (138.43 cm)
58" (147.32 cm)
Phillips screwdriver
Drill
NS-MG1158_14-1390_MAN_V2_ENG.fm Page 2 Monday, December 15, 2014 8:21 AM
SAFETY INFORMATION AND SPECIFICATIONS
CAUTION: The top surface of this stand
is designed for use with a product
weighing no more than
300 lbs. (136 kg) and having a width
that permits it to sit evenly on the
stand with no more than a one-inch overhang on
each side of the shelf. Use with products that weigh
more than the maximum weight allowed, or with
dimensions that extend beyond the maximum
width may result in instability, which may result in
injury.
CAUTION: This product contains small
items that could be a choking hazard if
swallowed.
Keep these items away from young
children!
Model #: NS-MG1158
QUICK-SETUP GLASS AND METAL TV STAND
Tools needed:
2
www.insigniaproducts.com
A Stand body(1)
B Top glass shelf (1)
C Middle glass shelf (1)
D Bottom glass shelf (1)
J
Rear support bar (1)
NS-MG1158_14-1390_MAN_V2_ENG.fm Page 3 Monday, December 15, 2014 8:21 AM
QUICK-SETUP GLASS AND METAL TV STAND
PACKAGE CONTENTS: PARTS
www.insigniaproducts.com
3
Label Hardware Qty.
E2
F2
G2
H2
Large
thumbscrew
Locking peg
Small
thumbscrew
Rubber pad
An optional anti-tipping hardware kit is included.
Instructions on how to install the hardware are
included on the bag containing the kit.
Label Hardware Qty.
I1
K1
L2
M3
T-s hap ed
shelf lock
Medium
thumbscrew
Large suction
cups
Small suction
cups
NS-MG1158_14-1390_MAN_V2_ENG.fm Page 4 Monday, December 15, 2014 8:21 AM
PACKAGE CONTENTS: HARDWARE
Note: You may receive extra hardware. Make sure you have all the hardware necessary to
QUICK-SETUP GLASS AND METAL TV STAND
assemble your new TV stand:
4
10 20 30 40 50 60 70 80 90 1 00mm
1234in
www.insigniaproducts.com
E
(2)
NS-MG1158_14-1390_MAN_V2_ENG.fm Page 5 Monday, December 15, 2014 8:21 AM
QUICK-SETUP GLASS AND METAL TV STAND
ASSEMBLY INSTRUCTIONS
Step 1: Unfolding the stand body.
• Unfold the stand body (A), then insert and tighten two large thumbscrews (E) into the right side of the rear panel.
You’ll need:
www.insigniaproducts.com
5
Loading...