Insignia NS-HZ330 Quick Setup Guide

QUICK SETUP GUIDE

RCA to HDMI Converter

NS-HZ330

PACKAGE CONTENTS

• Analog to HDMI Converter

• Power Adapter

• Quick Setup Guide

FEATURES

• Allows easy connection of devices with AV components to any TV or display with an HDMI input.

• HDMI output with selectable 720p/1080p output works with most TVs and displays with an HDMI input.

• Power adapter for constant use in any system.

• Supports NTSC/PAL TV formats.

Top view

OUTPUT 720P 1080P

Power-on indicator (green)

SETTING UP YOUR CONVERTER

Note: Before you install this device, turn o the audio/video device that you are

connecting.

1 Connect an AV cable (yellow, red, and white, not included) to the

input port on the converter, then connect it to the AV Out port on your audio/video device.

2 Using an HDMI cable (not included), connect the converter’s HDMI

output to a display device such as TV / LCD / Monitor that has HDMI input.

3 Connect the AC power adapter to the DC jack on the converter, then

plug the power adapter into a wall outlet.

4 Turn on the connected devices and begin playback. If you are not

getting audio or video, check the connections and settings to make sure that they are all correct.

5 Select either 720p or 1080p output via the switch on the converter.

If you are not sure, select 720p for maximum compatibility.

HD camera

Attent ion: Your converter supports RCA INPUT only. It doesn't

support RCA OUTPUT.

Note: RCA and HDMI cable not included and required for use.

Before using your new product, please read these instructions to prevent any damage.

INPUT

VIDEO R-AUDIO-L

DC jack

Blu-ray/DVD player

AV cable

(not included)

Set-top box

Display or TV

HDMI cable (not included)

Power adapter (included)

IMPORTANT SAFETY INFORMATION

• Indoor use only.

• There are no user serviceable parts. Do not open the housing.

• Do not use in a high humidity environment.

• Use included power adapter only.

SPECIFICATIONS

Dimensions (H×W×D): 1.25 × 2.85 × 3.2 in.

(3.18 × 7.23 × 8.3 cm)

HDMI Version: V1.3 Input Format: NTSC or PAL IHDMI Output Connector: Type A 19 pin Female × 1 HDMI Video Output resolution: 720p@60Hz

1080p@60Hz

Power Supply: 5V Power Consumption: 3.8 Watts (max.) Accessories: USB-A male to 2.1 × 5.5 mm DC plug

5.9 ft (1.8 m) length power cable

1A (USB Type-A Female Output)

TROUBLESHOOTING

If you have problems with your converter, try these suggestions before calling Customer Service.

PROBLEM

The power indicator is o

POSSIBLE SOLUTIONS

If the power on indicator is not on, make sure that the wall outlet that the power adapter is plugged into is a live outlet and that it is turned on (if it is switched).

No video and no audio

Check the connections and make sure that they are correct and secure. Make sure that the TV is set to the HDMI input, and the source device is

setup to output an RCA signal. Try the other position on the 720p/1080p switch on the converter box. Make sure that the RCA Cable or HDMI Cable is workable.

Has video, but no audio

Make sure that your TV or monitor is on the AV input. Make sure that the RCA Cable is workable. Make sure that the volume is turned up on your playback device.

Image quality is poor

Because of the limitations of the legacy analog composite video output, the image quality will not be as good as a digital or HD source. There will be softness to the image and the colors will not be as vivid. This is normal operation and not a limitation of the converter box.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution

Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ICES statement: CAN ICES-3 B/NMB-3 B

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

www.insigniaproducts.com

The Adopted Trademarks HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

V3 ENGLISH 20-0462