Insignia NS-HF2005 Assembly Manual

66" Metal & Glass TV Stand
NS-HF2005
ASSEMBLY GUIDE
Before using your new product, please read these instructions to prevent any damage.

Contents

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Stand parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Stand hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Anti-tip safety kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STEP 1 - Install the floor levelers.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STEP 2 - Attach the upper crossbars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 3 - Install the middle and lower shelf frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STEP 4 - Install the back frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
STEP 5 - Install the plugs and glass supports.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
STEP 6 - Install the top shelf.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STEP 7 - Install the lower shelves and the crossbar end caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Anti-tip safety strap installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-HF2005 represents the state of the art in TV stand design and is designed for reliable and trouble-free performance.

IMPORTANT SAFETY INSTRUCTIONS

WAR NIN G: Failure to follow these installation instructions or any other abuse, mistreatment, unreasonable use or neglect
of the product shall constitute a waiver of all warranties, expressed and implied, and constitute a waiver of all claims of liability (including loss of revenue or income, pain and suffering, emotional distress, or similar damages), incidental, punitive, or consequential damages arising out of or resulting from the improper installation, abuse, mistreatment, unreasonable use or neglect regardless of whether such damages arise in contract, tort, under statute, in equity, at law, or otherwise.
WAR NIN G: THIS PRODUCT IS INTENDED TO HOLD THE MAXIMUM WEIGHT (EVENLY DISTRIBUTED) INDICATED. EXCEEDING THE MAXIMUM WEIGHT WILL RESULT IN INSTABILITY AND MAY CAUSE POSSIBLE INJURY.
If the glass is chipped or broken stop using the product and contact Insignia customer service.
GLASS WARNING:
• DO NOT place very hot or very cold items on the glass surface(s) unless adequately thick table mats are used to prevent such items from coming into contact with the glass.
• DO NOT sit or stand on the glass surface(s).
• DO NOT use the glass as a chopping surface.
• DO NOT strike the glass with hard or pointed items.
• When cleaning the glass, use a liquid glass surface cleanser and a soft cloth; DO NOT use harsh powders or any other abrasive substances as they will scratch the glass.
WAR NIN GS:
• The weight of your TV must not exceed 120 lbs. (54.4 kg).
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
SAVE THESE INSTRUCTIONS
2
www.insigniaproducts.com

Features

2
0
i
n
.
(5
0
.
8
c
m
)
50 lbs. (22.7) kg
6
6
i
n
.
(
1
6
7
.
6
c
m
)
8 in.
(20.3cm)
8 in.
(20.3cm)
5
9
.
7
in
.
(
1
5
1
.
6
cm
)
22 in. (55.8 cm)
50 lbs. (22.7) kg
120 lbs. (54.4 kg)
1 Side frame (2)
2 Upper back crossbar (1)
4 Middle frame (1)
5 Lower frame (1)
6 Back frame (1)
8 Lower glass shelf (2)
7 Top glass shelf (1)
3 Upper front crossbar (1)
I
n
s
i
d
e
Top
Front
Front
Top
To p
Top
Top
Top
Top
Inside
• Supports TVs up to 75" (190.5 cm) or 120 lbs (54.4 kg)
• Integrated cable management system keeps cables organized
• Modern metal and glass design looks great with any décor
• Steel frame construction for strength and durability
• Tempered-glass shelves resist breakage

Dimensions

NS-HF2005

Package contents

Make sure that you have all the parts and hardware to assemble your new TV stand.

Stand parts

www.insigniaproducts.com
3

Stand hardware

Floor leveler
Rubber plug
6 × 28 × 16 mm Allen bolt
Crossbar end cap
6 × 35 × 10 mm Allen bolt
Back frame end cap (pre-assembled)
6 × 41 × 10 mm Flat head Allen bolt
Wire management strip (pre-assembled)
Allen wrench
3.5 × 12 × 6 mm wood screw (pre-assembled)
Adjustable glass support
4.5 × 10 × 8 mm machine screw
Mounting tab
4 × 25 × 8 mm wood screw
Plastic mounting strap
Plastic socket
66" Metal & Glass TV Stand
LABEL DESCRIPTION QTY.
A
B
C
D
E
F

Anti-tip safety kit

12
LABEL DESCRIPTION QTY.
4
8
2
1
4
G
H
ZA
ZB
ZC
16
4
2
2
2
WA
WB
WC
2
2
2
WD
WE
4
2
4
www.insigniaproducts.com

Assembly instructions

1 Side frame (2)
A Floor leveler (4)
Inside
Inside
WAR NIN G: You need two people to assemble your TV stand.

STEP 1 - Install the floor levelers.

You’ll need
1 Lay a side frame (1) on its side, then screw a floor leveler (A) into each of the frame legs.
NS-HF2005
2 Repeat this step to attach floor levelers to the other side frame.
www.insigniaproducts.com
5
Loading...
+ 9 hidden pages