Inovonics FA100 User Manual

FA100

Frequency Agile® 900MHz

Command Transmitter

Installation Instructions

01902B

Important Notes

 These products are designed to be installed and maintained by professional security technicians.
 Products, unless specifically noted, are intended for indoor use.
 Manually test all products regularly.

© 1999 Inovonics Wireless Corporation
315 CTC Blvd Louisville CO 80027

FAX: [phone]

www.inovonics.com

E-mail: [e-mail]

01902b.doc Lit-FA100-Install hc:08/31/01

[phone]

FA100

Command Transmitter

Device type: REMOTE
Typical battery life: 10 years
Battery type: 3.0V lithium
Duracell DL123A (or equivalent)

PROGRAMMING HEADER

3.0V

+

RESET BUTTON

After replacing battery, press

RESET BUTTON to restore

transmitter programming.

FA100 Programming

1. Open transmitter by removing two screws from back.

2. Connect the cable from programming device to programming header on transmitter.

3. Press reset button on transmitter. The programming device will indicate successful
programming.

4. When programming is complete, disconnect cable.

Note: The FA100 is labeled (from top to bottom) "alert-away-home-off".
Note: Unauthorized individuals should not have access to programmed FA100 Command

Transmitters.

Programming to Control Panels

The FA100 is used to arm and disarm Inovonics Vision Plus and Wireless Guardian systems, as well as the
DMP XR20 and XR200 panels, and Radionics 2000 series control panels. Refer to the system manuals for
these products for specific programming sequences.

In programming mode, set TYPE to REMOTE.
MONITORED, AUDIBLE and RELAY OUT options determine how the control panel will handle "Alert"

signals. Select options as desired.
When prompted to "Plug in xmitter", perform the programming sequence described under "FA100

Programming".

Using the FA100 with the FA422 16 Point Expander

for Radionics 2000 Series Control Panels

1. Refer to FA422 Installation Manual for information on configuring and
programming the FA100 to the Radionics panel.

2. Carefully peel off the standard FA100 keypad overlay, and replace it with the
FA422 overlay included in the packing.

Warranty & Disclaimer

I

novonics Wireless Corporation ("Inovonics") warrants its products ("Product" or
"Products") to conform to its own specifications and to be free of defects in
materials and workmanship under normal use for a period of twenty-four (24)
months from the date of manufacture. Within the warranty period Inovonics will
repair or replace, at its option, all or any part of the warrantied product. Inovonics
will not be responsible for dismantling and/or reinstallation charges. To exercise
the warranty, the User ("User", "Installer" or "Consumer") must be given a Return
Material Authorization ("RMA") Number
arranged at that time

This warranty does not apply in cases of improper installation, misuse, failure to
follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than Inovonics.

This warranty is exclusive and expressly in lieu of all other warranties, obligations
or liabilities, whether written, oral, express, or implied, including any warranty of
merchantability or fitness for a particular purpose. Inovonics will not be liable to
anyone for any consequential or incidental damages for breach of this warranty
or any other warranties.

This warranty will not be modified, varied or extended. Inovonics does not
authorize any person to act on its behalf to modify, vary or extend this warranty.
This warranty will apply to Inovonics Products only. All other products,
accessories or attachments used in conjunction with Inovonics equipment,
including batteries, will be covered solely by their own warranty, if any. Inovonics
will not be liable for any direct, incidental or consequential damage or loss
whatsoever, caused by the malfunction of Product due to products, accessories,
or attachments of other manufacturers, including batteries, used in conjunction
with Inovonics Products.

This warranty does not warrant the replacement of batteries that are used to
power Inovonics Products.

.

by Inovonics. Details of shipment will be

The User recognizes that a properly installed and maintained security system
may only reduce the risk of events such as burglary, robbery, personal injury and
fire. It does not insure or guarantee that there will be no death, personal damage
and/or damage to property as a result. Inovonics does not claim that the

Product may not be compromised and/or circumvented, or that the Product
will prevent any death, personal and/or bodily injury and/or damage to
property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection.

Inovonics shall have no liability for any death, injury or damage, however
incurred, based on a claim that Inovonics Products failed to function.

However, if Inovonics is held liable, directly or indirectly, for any loss or damage
arising under this limited warranty or otherwise, regardless of cause or origin,
Inovonics' maximum liability will not in any case exceed the purchase price of the
Product, which will be fixed as liquidated damages and not as a penalty, and will
be the complete and exclusive remedy against Inovonics.

!

Warning: The User should follow all installation, operation and

maintenance instructions. The User is strongly advised to

conduct Product and systems tests at least once each week.
Changes in environmental conditions, electric or electronic
disruptions and tampering, may cause the Product to not perform
as expected.

Warning: Inovonics warrants its Product to the User. The User is

responsible for exercising all due prudence and taking necessary
precautions for the safety and protection of lives and property
wherever Inovonics Products are installed. Inovonics strongly
advises the User to program Products to be supervised
whenever used in applications affecting life safety. Users are
warned that unsupervised devices are subject to undetected
failure due to malfunction, battery failure, tampering, or changes
in environment.

!