» Radar-based motion detector working in the 24GHz - ISM - Band
» Detection of direction and velocity of moving objects
» Mounting by standard SMT-Process
» Delivery on Tape & Reel
» Integrated Low Noise Amplifier
» Extended temperature range from -40°C up to +85°C
» Very small outline dimensions
» Available with different antenna patterns by same interface
Movement
Velocity
Direction
Presence
Distance
Angle
DESCRIPTION
K-Band based motion detector. The ultra small device
will be delivered directly on tape for mounting within a
standard SMT. Due to the pulse capability the sensor
is also suitable for low-power applications.
ETSI / FCC
All SMR modules are compliant to ETSI 300 440. The
US Version is compliant to FCC 15.249.
ADDITIONAL INFORMATION
InnoSenT Standard Product. Changes will not be
notified as long as there is no influence on form, fit
and within this User Manual specified function of the
product.
CERTIFICATES
InnoSenT GmbH has established and applies a quality
system for: development, production and sales of
radar sensors for industrial and automotive sensors.
RoHS-INFO
This product is compliant to the restriction of
hazardous substances (RoHS - European Union
directive 2011/65/EU).
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 1 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
SMR
www.InnoSenT.de
PARAMETERS
PARAMETERCONDITIONSSYMBOLMINTYPMAXUNITS
Radar
transmit frequencyfrequency band for US and EU f24.15024.250GHz
output power (EIRP)P
IF-Bandwidth (-3dB)B01MHz
noise level 100Hz...1kHzN
quadrat. phase imbalance
Power supply
supply voltageV
supply currentI
Environment
operating temperatureT
storage temperatureT
Mechanical Outlines
outline dimensionscompare to schematic on page 5
out
1/2
ε
p
CC
CC
OP
STG
height
length
width
-2525°
3.23.33.4V
4757mA
-40+85°C
-40+85°C
3.1
21.4
15.0
20dBm
20µVrms
mm
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 2 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
ANTENNA PATTERN
System Pattern SMR-313:
SMR
www.InnoSenT.de
-90°
-45°
-
-50
-40
-30
-20
-10
45°
0°
90°
-90°
-45°
-
-50
-40
-30
-20
-10
45°
0°
system pattern (-10dB)azimuthsystem_az121°
elevationsystem_el111°
System Pattern SMR-323:
-90°
-45°
-
-50
-40
-30
-20
-10
45°
90°
-90°
-45°
-
-50
-40
-30
-20
-10
45°
90°
90°
0°
0°
system pattern (-10dB)azimuthsystem_az100°
elevationsystem_el10 4°
System Pattern SMR-333:
-90°
-45°
-
-50
-40
-30
-20
-10
45°
0°
system pattern (-10dB)azimuthsystem_az43°
elevationsystem_el116°
90°
-90°
-45°
-
-50
-40
-30
-20
-10
45°
0°
90°
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 3 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
SMR
www.InnoSenT.de
PULSE SCHEME
In order to use the pulse capability of the SMR the following scheme is recommended to avoid out of band
emissions:
> 3µs
3.3V
VCC
0V
> 1µs
3.3V
enable
0V
1µs
1µs
INTERFACE
The sensor provides solder pads for SMT mounting.
PIN #DESCRIPTIONIN/OUTCOMMENT
1d.n.c.do not connect
2d.n.c.do not connect
3IF1outputsignal I(nphase)
4IF2outputsignal Q(adrature)
5enable*inputTX output power enable (active high)
6GNDinputanalog ground
7V
8d.n.c.do not connect
9d.n.c.do not connect
cc
inputsupply voltage
10GNDinputanalog ground
*the enable has no influence on current consumption rather reduces the TX output power by about 30dB. To save
power use a pulse scheme as described on page 3.
enable pin off: 0 - 0.8V
enable pin on: 2 - 3.3V
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 4 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
21.4 ±0.3
15 ±0.3
antenna centroidrotational pivot
0.9 ±0.1
3.1 ±0.3
20.4±0.3
14 ±0.3
soldering pad (10x)
Pin 1
Pin 5
Pin 6
Pin 10
1
220
180
Time
Temperature (°C)
Min. 60sec
Max. 120sec
Min. 30 sec
Max. 90sec
Max. 260°C, Min 230°C
150
OUTLINE DIMENSIONS
SMR
www.InnoSenT.de
SMT GUIDELINES
The SMR device is 100% Pb-free. Therefore, Pb-free solder paste with a Pb-free re flow profile is recommended.
Do not use solder paste with active or acid-based flux. To avoid submerging the device in the solder paste, the
placement height (Z) of the device on the pick-and-place equipment should be controlled carefully. Optimally, the Z
height should be set at one-half the printed solder paste height. Maintaining board flatness (coplanarity) is important
in keeping the Z height under control.
If possible use a pick-and-place machine with a visions-alignment system for proper centering on the PCB.
For the soldering process we recommend the following:
•For optimum results the reflow oven should have nitrogen purge (we recommend 1000ppm)
•To avoid damage during assembly solder re flow attachment, follow the guidelines in IPC/JEDEC J-STD-
020D.1. The device is qualified at 260 °C re flow. The following figure shows a typical temperature profile for
Pb-free (Sn-Ag-Cu or Sn-Ag) solder and the corresponding critical re flow parameters.
•Assemble the SMR within 5 days after opening the packing
•Not assembled SMR must be dried for 500h at 40 degree Celsius; 1% r.H. before repacking in a dry pack.
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
CONFIDENTIAL AND PROPRIETARY
Page 5 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
1.05
21.4 ±0.3
15 ±0.3
antenna centroidrotational pivot
0.9 ±0.1
3.1 ±0.3
20.4±0.3
14 ±0.3
21.4
A
1.4
1.6
1.5
2.2
2.3
2.15
Copper
Solder
Paste
Footprint
Recommended stencil thickness 225µm
Pin 6
Pin 10
1
PACKAGE FOOTPRINT
Recommended Footprint and Stencil Layout
SMR
www.InnoSenT.de
TAPE OF SMR-313/323/333
The SMR-313/323/333 will be delivered on tape with a width of 32mm.
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
CONFIDENTIAL AND PROPRIETARY
Page 6 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
SMR
www.InnoSenT.de
Annex A
The information that will be given below is only a rough overview; for details please contact the local approval
agencies. An overview over the frequency bands in Europe can also be found in the REC 70-03 (Annex 6) which is
available under www.ero.dk
Frequency Bands in US FCC 15.249
For the US-market the SMR-3X3 can be used
24.00024.250
US-frequency
FCC approval
This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)].
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void
the FCC authorization to operate this equipment.
Manufacturers of mobile or fixed devices incorporating SMR-3X3 modules are authorized to use the FCC Grants
of the SMR-3X3 modules for their own final products according to the conditions referenced in these documents.
In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second
label stating „Contains FCC ID: UXS-SMR3X3 “
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the
FCC authorization to operate this equipment.
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 7 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
Frequency Bands in Europe
Generally the SMR-3X3 can be used also for all countries in Europe.
SMR
www.InnoSenT.de
24.00024.150
Labeling
SMR-3X3
ORDER INFORMATION
SMR
www.InnoSenT.de
3dB: 121° x 111°
(1 x 1 Patch)
antenna
3dB: 100° x 104°
(1 x 2 Patch)
24.250
Europe-frequency
3dB: 43° x 116°
(1 x 4 Patch)
SMR-313
SMR-323
SMR-333
HANDLING PRECAUTIONS
To avoid damage to the devices, care should be exercised during handling. Proper Electrostatic Discharge (ESD)
precautions should be observed at all stages of storage, handling, assembly, and testing.
ESD INTEGRITY
ESD Robustness HBM = +/- 1kV according to ANSI/ESDA/JEDEC JS-001
(R = 1.5kOhm, C = 100pF) for Electrostatic Discharge Sensitivity Testing, Human Body Model
(HBM)-Component Level; CDM = +/- 500V according to JEDEC JESD22-C101 Field-Induced
Charged Device Model (CDM), Test Method for Electrostatic-Discharge-Withstand Thresholds
of Microelectronic Components.
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 8 USER MANUAL SMR-313 / 332 / 333 Version 2.0
Experience and Reliability in Radar Technology
SMR
www.InnoSenT.de
APPROVAL
This User Manual contains the technical specifications of the described product. Changes of the specification
must be in written form. All previous versions of this User Manual are no longer valid.
VERSIONDATECOMMENT
1. 008.04.2016initial release
1.1 26.07.2016Data matrix code in outline dimensions removed
1.2 06.03.2017changing recommended footprint; addition information in interface
1. 316.06.2017adding label
1. 421.09.2017changing frequency band information
1. 506.10.2017changing frequency band information
1. 614.11.2017changing transmit frequency condition
1. 720.12.2017changing recommended footprint
1. 812.02.2018remove SMR-323; changing frequency band and handling information
1. 913.04.2018adding SMR-323
2.008.05.2018changing Frequency Bands information
InnoSenT GmbH
Am Rödertor 30
97499 Donnersdorf
GERMANY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be
disclosed by the recipient to third parties without prior consent of InnoSenT in writing.