Ingersoll-Rand EP50 User Manual

EP50 Air Engraving Pen Exploded Diagram

(Dwg. TPB746)

Form 16574907

Edition 1

January 2006

EP50 Air Engraving Pen Parts List

Item Part Description Part Number Item Part Description Part Number

1 Nosepiece EP50-502 12 Inlet EP50-503

† 2 Stylus Spring EP50-505 * Warning Label (for models

3 Stylus (standard) EP50-516 ending in -EU) EU-99

4 Cylinder Spacer EP50-506 * Hose Assembly (6 feet of 3/16” I.D. hose;

† 5 Cylinder O-Ring EP50-512 includes 1/8” NPT fittings at both ends) DG100-130

6 Cylinder EP50-508 * Stylus

7 Piston EP50-507 fine point EP50-515

† 8 Piston Stop EP50-509 coarse point EP50-517

9 Housing * Carrying Case DG10-RF

for models ending in -EU EP50-EU-501 * Stylus Grinding Collet EP50-514

† 10 Housing Seal (2) EP50-511 parts 2, 5, 8 and 10) EP50-TK1

* Not illustrated.

† Indicates Tune-up Kit part.

for all other models EP50-501 * Tune-up Kit (includes illustrated

11 Throttle Sleeve EP50-510

Parts and Maintenance

When the life of the tool has expired, it is recomme nded that the tool be disassembled, degreased and parts be se parated by material so that they can be recycled.

Tool repair and maintenance should only be carried out by an authorized Service Cen ter.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.

Related Documentation

For additional information refer to:
Product Safety Information Manual 16576704.
Product Information Manual 16584039.
Maintenance Information Manual 16575946.

Manuals can be downloaded from www.irtools.com.

www.irtools.com

© 2006 Ingersoll-Rand Company

Form 16574907

Edition 1

January 2006