Ingersoll-Rand 99V User Manual
Air Grinder
99V Series
Parts Information
16573313
Edition 3
December 2009
Save These Instructions
2 16573313_ed3
88V Series Air Grinder Exploded Diagram
48
47
29
30
33
35
37
31
34
36
39
38
40
43
45
42
46
41
1
27
16
17
18
14
15
10
7
8
18A
20
19
11
12
13
3
2
3
6
5A
5
51
51
52
52
49
50
62
63
54
Use this drawing with part listing for models without built-in oilers
(Dwg. TPA1708)
88V Series Air Grinder Parts List
Use this part listing with drawing TPA1708 for models without built-in oilers
Item Part Description Part Number Item Part Description Part Number
‡ 1 Cylinder Case Assembly 19 Exhaust Deector 99V60-23
for models ending in -EU 99V60-EU-A25A 20 Exhaust Deector Screw (3) 99V60-200
for all other models 99V60-A25A
2 Throttle Valve Assembly 88V60-A302 (for European compliant models)
3 Throttle Seal (2) C321-606
5 Inlet Bushing 88V60-38 (for European compliant models) (4)
• 5A Inlet Bushing Screen 834-61
• 6 Throttle Valve Spring 99V60-262 (for European compliant models)
7 Throttle Valve Seat Support Assembly 88V60-A303 * Nameplate Kit (for domestic models) 99V-K301A
• 8 Air Strainer Screen 834-61 Nameplate Screw (4) BN403-302
• 10 Valve Seat R4-159A Warning Label WARNING-4-99
11 Valve Seat Washer 99V60-155 25 Dead Handle 88V60-48
12 Valve Screw Lock Washer H54U-352 27 Arbor
13 Valve Seat Screw PS3-83 for 99V45 (Orange) 99V45-204-P10
14 Throttle Lever Pin MR-100 for 99V60 (Blue) 99V60-204-P10
15 Locking Lever Assembly 88V60-A400 for 99V77 (Green) 99V77-204-P10
16 Lever Lock 88V60-402 for 99V85 (Red) 99V85-204-P10
17 Lever Lock Spring 88V60-405 30 Front Rotor Bearing R380-105
18 Lever Lock Pin 502B-120 31 Front End Plate 99V60-11
18A Exhaust Diuser
(not used on 99V45 or 99V60)
* Not Illustrated.
• To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each
part indicated by a bullet (•) for every four tools in service.
‡ Whenever a new Cylinder Case Assembly is installed, select the correct Nameplate from the Nameplate Kit and attach it to the Cylinder Case
with the Nameplate Screws.
99V77-123
*
*
*
Nameplate Kit
Nameplate Screw
Warning Label
99V-EU-K301A
BN403-302
EU-99
16573313_ed3 3
Loading...