Infinity Kappa 65.1mb Instructions Manual

®

K

APPASERIES

INSTALLATION WARNINGS AND TIPS

• Always wear protective eyewear when using
any tools.

• Turn off all audio systems and other electrical
devices before you start. Disconnect the (–) neg­ative lead from your vehicle’s battery.

• Keep speakers in their package until final instal­lation. When moving a speaker, always rest it
with the cone or dome facing up. Never use
force to install any speaker.

• Check clearances on both sides of a planned
mounting surface before drilling any holes or
installing any screws. Remember that the
screws can extend behind the surface.

• At the installation sites, locate and make a note
of all fuel lines, hydraulic brake lines, vacuum
lines and electrical wiring. Use extreme caution
when cutting or drilling in and around these
areas.

CAUTION: In some cars, fuel tanks may be
located directly beneath the rear deck. Check
for adequate speaker basket clearance before
considering this location!

• Before drilling or cutting holes, use a utility
knife to remove unwanted fabric or vinyl, to
keep material from snagging in a drill bit or
saw.

• For door installations, check the clearance with
the windows throughout the range of the win­dow’s travel, and verify that a mounted speaker
will not interfere with the window crank or
power window mechanism.

• If mounting speakers elsewhere, check for clear­ance around rear-deck torsion bars, glove box
or other structural elements.

• Do not mount speakers where they will get wet.

Match Notch on
Speaker with
Notch on Trim Ring

Grille
Screen

Hole
Cutout

Grille
Trim Ring

INSTALLATION

Figure 1

Door Mounting with Grille. If mounting behind
factory grilles, omit the trim ring and the grille
screen.