Compact
LED Moving Head
T
WIST-60LED
Order No. 38.8020
INSTRUCTION MANUAL
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
www.monacor.com 01.21.02.2017
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
1.2 Safety Instructions
1. INTRODUCTION
■
1 x TWIST-60LED
■
1 x Power cord
■
1 x Mounting bracket
■
1 x User Manual
!
Warning!!! To reduce the risk of fire, electric shock, or injury to persons,
follow these important safety instructions:
Caution!
Avoid looking directly into the LED light beam at a close distance!
1
Thank you for selecting this product. Equipped with a 60W white LED
engine, this LED Moving Head is compact, light weight but powerful. It offers
DMX, Auto, Sound, Master/Slave. Ideal for small clubs, bars, parties, etc. To
optimize the performance of this product, please read the user manual carefully
before use.
1.1 Unpacking
The following items are included in the box:
1.3 Features
▪
LED Spot moving head
▪
4-button OLED display
▪
1 color wheel: 7 colors + white, rainbow
▪
1 Gobo wheel: 5 gobos + open, shaking
▪
3-facet prism
▪
Motorized focus
▪
4 working modes: DMX, Auto, Sound, Master/Slave
▪
DMX modes: 15/10 channels
▪
Pan : 540° Tilt: 270°
▪
The product is for indoor use only.
▪
Always turn off, unplug power and allow fixture to cool before servicing.
▪
Ensure that fixture is properly grounded.
▪
Please keep this User Guide for future consultation.
▪
Always make sure that you are connecting to the proper voltage and that the line
voltage you are connecting to is not higher than that stated on decal or rear panel
of the fixture.
▪
Always disconnect from power before servicing or replacing fuse.
▪
Make sure power cord is never crimped or damaged.
0-100% linear dimmer
1-25 fps strobe
Carefully unpack the carton, check the
contents to ensure that all parts are
present, and have been received in good
condition. Contact your supplier
immediately and retain packing material
for inspection if any part is missing or
damaged.
▪
▪
1.4 Product overview
2. SETUP
2
2.1 Mounting
The Moving Head is fully operational in any mounting position, hanging upsidedown, side mounted, or set on a flat llevel surface, etc.
IMPORTANT!!! Safety cables must always
be used when unit is celling or truss
mounted. The safety cable must be
capable of holding 10 times the weight of
the fixture.
2.3 AC Power
The fixture is designed to work on
AC 230V 50Hz. All units must be powered
directly from a switched circuit.
This unit cannot be run on a rheostat or
dimmer circuit even if used solely for a
0% to 100% switching.
WARNING!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
Control Panel DMX In/Out
3. OPERATION INSTRUCTIONS
3
4
3.2 DMX Channels
1
2
3
4
5
Open
1
2
34
5
6
7
10Ch 15Ch DMX Value Funcon
1 1 000 - 255 Pan
2 000-255 Pan Fine
2 3 000 - 255 Tilt
4 000-255 Tilt Fine
5 000 - 255 XY Speed from fast to slow
3 6 000-255 Dimmer 0-100%
000-004 Strobe closed
005-250 Strobe from slow to fast
251-255 Strobe open
000-013 White (Open)
014-031 Color1
032-049 Color2
050-067 Color3
068-085 Color4
086-103 Color5
104-121 Color6
122-130 Color7
131-139 White (Open)
140-195 Forward color wheel rotaon from fast to slow
196-199 No rotaon
200-255 Backward color wheel rotaon from slow to fast
000-008 Open(White)
009-034 Gobo1
027-043 Gobo2
044-060 Gobo3
061-077 Gobo4
078-094 Gobo5
095-114 Gobo1 Shaking
115-134 Gobo2 Shaking
135-154 Gobo3 Shaking
155-174 Gobo4 Shaking
175-194 Gobo5 Shaking
195-224 Forward Gobo wheel rotaon from fast to slow
225-255 Backward Gobo wheel rotaon from slow to fast
9
4
5
6
7
8
3.1 Menu Map
5
000-009 No funcon
010-129 Forward Gobo rotaon from fast to slow
130-134 No rotaon
135-255 Backward Gobo rotaon from slow to fast
8 11 000-255 Focus 0 - 100%
000-127 No funcon
128-255 Prism on
000-007 No funcon
008-047 Auto program 1
048-087 Auto program 2
088-127 Auto program 3
128-167 Auto program 4
168-207 Auto program 5
208-247 Auto program 6
248-255 Color & Gobo run to Sound
000-007 No funcon
008-032 X/Y auto run 1
033-058 X/Y auto run 2
059-084 X/Y auto run 3
085-110 X/Y auto run 4
111-136 X/Y auto run 5
137-162 X/Y auto run 6
163-188 X/Y auto run 7
189-240 X/Y auto run 8
241-255 X/Y auto run to sound
51-100 6S for High speed mode
151-200 6S for Low speed mode
251-255 6S to RESET the fixture
10
12
13
10 15
14
9
7
6
I
MPORTANT INFORMATION!
In order to optimize the recovery and recycling of the materials that old
appliances contain and reduce the impact on human health and the
environment, ensure that this product is recycled at the end of its life.
5. Specifications
Source: 1 x 60W white LED
Beam angle: 13°
Power consumption: 220VA
Fuse: F2AL/250V
Power supply: AC 230V, 50Hz
Dimensions: 200 x 335 x 150 mm
Weight: 4.5 kg
4. General Maintenance
a.
Unscrew the fuse holder and remove the damaged fuse.
b.
Replace with exact same type fuse and screw the fuse holder back in its place.
4.1 Fuse Replacement
Loading...