Image 831285780 Owner’s Manual

Patent Pending

Model No. 831.285780 Serial No.

Write the serial number inthe space above for future reference.

Serial

/ t_,_Number

.1.j_ Decal

EXERC|S _-

EO u I PM E NT

H ELPLIIN E!

1-800-736-6879

CAUTION

Read all precautions and instruc- tions in this manual before using this equipment. Keep this

manual for future reference.

ER'S ANLIAL

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, tL 60179

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ................................................................ 2

BEFORE YOU BEGIN ....................................................................... 3

ASSEMBLY ............................................................................... 4

HOW TO USE THE IMAGE ®7.0 STEPPER ...................................................... 6

TROUBLE-SHOOTING AND MAINTENANCE .................................................... 8

CONDITIONING GUIDELINES ................................................................ 9

PART LIST .............................................................................. 10

EXPLODED DRAWING .................................................................... 11

ORDERING REPLACEMENT PARTS .................................................. Back Cover

FULL 90 DAY WARRANTY .......................................................... Back Cover

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before

using the stepper.

1. Read all instructions in this manual before using the stepper.

2. It is the responsibility of the owner to ensure 7. Wear appropriate clothing when using the

that all users of the stepper are adequately stepper. Do not wear loose clothing that

informed of all precautions, could become caught on the stepper. Always

3. Place the stepper on a level surface. Place a mat under the stepper to protect the floor or 8. If you feel pain or dizziness at any time while

carpet. Keep the stepper indoors, away from exercising, stop immediately and begin moisture and dust. cooling down.

4. Inspect and tighten all parts of the stepper regularly. Replace any worn parts

immediately.

5. Keep children under 12 and pets away from 10. Use the stepper only as described in this

the stepper at all times, manual.

6. The stepper should not be used by persons

weighing more than 250 pounds.

wear athletic shoes for foot protection.

9. The stepper is intended for in-home use only. Do not use the stepper in any

commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for selecting the new IMAGE '_'7.0 stepper. Stepping is one of the most effective exercises known

for increasing cardiovascular fitness, building endurance, and toning the entire body. The IMAGE ®

7.0 stepper blends advanced engineering with innovative styling to let you enjoy this invigorating

exercise in the comfort and privacy of your own home. Feel better, look better, and be healthier in just a few

minutes a day.

For your benefit, read this manual carefully before using the IMAGE 's7.0 stepper. If you have questions

after reading the manual, call our toll-free HELPLINE at

Console

Handlebars

1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To help

us assist you, please note the product model number and serial number before calling. The model number is

831.285780. The serial number can be found on a decal attached to the stepper (see the front cover of this

manual for the location).

Before reading further, please review the drawing below and familiarize yourself with the parts that are

labeled.

Remote Control Holder

Water Bottle Holder

(Water Bottle is

not included)

Pedals

Stabilizer

Side Shield

FRONT

Wheels

RIGHT SIDE

BACK

ASSEMBLY

Assembly requires two people. Place all parts of the stepper in a cleared area and remove the packing materials.

Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning.

THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The included allen wrench

screwdriver ___, and a rubber mallet _-......................

Feed the end of the console wire harness down through the Upright (2). Attach the Console (50) to the Upright with four #8

x 1/2" Screws (25). Be careful to avoid pinching the console wire harness,

Remove the five indicated #8 x 1/2" Screws (25) from the Right Side Shield (55). Remove the five corresponding #8 x

1/2" Screws from the Left Side Shield (62). Do not remove the Side Shields,

, a phillips

Console Wire Harness

While another person holds the Upright (2), connect the console wire harness to the Lower Wire Harness (32). Refer to

the inset drawing. If the Wire Harnesses do not fit together easily, turn them--do not force them together,

Tip the Side Shields (55, 62) forward. If the three MlOx 25mm Button Screws (49) and MIO Lock Washers (20) are in the

Frame (1), remove them. Feed the Wire Harness (32) into the Frame, and slide the Upright (2) onto the Frame. Loosely

thread the three MIO x 25mm Button Screws with MIO Lock Washers into the Upright and the Frame. After you have

threaded all three Button Screws into the Upright and the

Frame, firmly tighten them.

Tip the Side Shields (55, 62) back and reattach them with the ten #8 x 1/2" Screws (25) removed in step 2. Install the bottom

Screws first.

Console Wire

+ 8 hidden pages