Image 831.100430 User Manual

USER’S MANUAL
QUESTIONS?
As a manufacturer, we are com­mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee complete satis­faction through direct assistance from our factory.
TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained techni­cians on our customer hot line will provide immediate assis­tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Thu., 8:00 am—6:30 pm; Fri., 8:00 am—6:00 pm EST
Model No. 831.100430 Serial No.
Write the serial number in the space above for reference.
Patent Pending
CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Save this manual for future reference.
Serial Number Decal
®
SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CHOOSING A LOCATION FOR THE RENEW 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
USING THE RENEW 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Note: A PART LIST and an EXPLODED DRAWING are attached to the center of this manual.
2
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the RENEW 900.
READ AND FOLLOW ALL INSTRUCTIONS
1. It is the responsibility of the owner to ensure that all users of the RENEW 900 are ade­quately informed of all precautions.
2. Use the RENEW 900 only as described in this manual.
3. The RENEW 900 is intended for home use only. Do not use the RENEW 900 in any com­mercial, rental, or institutional setting.
4. Use the RENEW 900 only on a level surface. Do not use the RENEW 900 on carpet or other materials that could be damaged by moisture. Do not use the RENEW 900 on rough or sharp surfaces such as gravel or wood chips.
5. The RENEW 900 will weigh approximately 2400 pounds when it is assembled and filled with water. Be sure that the location you select for the RENEW 900 will support this weight, plus the weight of the occupants.
6. Inspect and tighten all parts regularly. Replace any worn parts immediately.
7. DANGER—Risk of injury: Do not remove or alter the covers on the suction fittings. Never operate the RENEW 900 if the suction guard is missing or broken. Keep hair and body away from the suction guard. If you need to replace a suction fitting, be sure that the flow rate of the replacement is compatible.
8. Do not bring any object into the RENEW 900 that could puncture the liner.
9. Never insert any object into any opening.
10. Do not sit on the spa cover or place objects on it. It is not designed to support weight.
11. Remove any water which may collect on the spa cover.
12. Keep children and pets away from the RENEW 900 when it is not in use.
13. Keep all chemicals away from children and pets.
14. The pH and chemical balance of the water must be maintained as explained in this man­ual (see page 13). Failure to do so may cause injury to users or damage to the spa jet unit, and will void the warranty.
15. The water pump in the spa jet unit must be primed before you use the RENEW 900 the first time. You must also prime the pump before using the unit each time you re-fill the spa. The spa jet unit may be seriously dam­aged if the pump is not properly primed (see PRIMING THE SPA JET UNIT on page 10).
16. DANGER—When connecting the power cord (see PLUGGING IN THE RENEW 900 on page
10), plug the power cord directly into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Replace the power cord immediately if damaged.
17. Do not use an extension cord with the RENEW 900. This could damage the motor and will void the warranty.
18. DANGER—If you will be using the RENEW 900 outside, do not bury the power cord; you should also keep the power cord away from lawn mowers, hedge trimmers, and other similar equipment.
19. WARNING—The power cord is equipped with a Ground Fault Circuit Interrupter (GFCI), located at the end of the power cord. The GFCI must be tested before each use. To test the GFCI, press the “test” button while the spa jet unit is running. The spa jet unit should shut off. Press the “reset” button. The spa jet unit should resume normal oper­ation. If the spa jet unit continues to run after the “test” button is pressed, then the GFCI is damaged. Do not use the RENEW 900 until the GFCI has been repaired or replaced by a qualified electrician.
4
20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.52 meters) away from the water.
21. A wire connector is provided on the pump motor of this unit to connect a minimum No. 8 AWG (804 mm
2
) solid copper conductor between this unit and any metal equipment, electrical enclosure made of metal, metal water pipes, or conduit within five feet (1.52m) of the unit.
22. DANGER—Risk of electric shock: Do not set up the RENEW 900 within five feet of any metal objects or surfaces. As an alternative, you may use the RENEW 900 within five feet of metal objects if each metal object is per­manently connected to the wire connector on the pump motor of this unit by a minimum No. 8 AWG (804 mm
2
) solid copper conductor
(see instruction 21).
23. DANGER—Risk of drowning: Exercise extreme caution to prevent unauthorized and unsupervised use of the RENEW 900 by chil­dren. Children must always be supervised.
24. DANGER—To reduce the risk of drowning:
• Never use the RENEW 900 alone;
• Children should not use the RENEW 900
unless they are supervised by an adult;
• Keep pets away from the RENEW 900 at all
times;
• Always replace and lock the spa cover
when the RENEW 900 is not in use.
25. WARNING—To reduce the risk of injury: The water temperature should never exceed 104°F (40°C). Temperatures between 100°F (38°C) and 104°F (40°C) are considered to be safe for healthy adults. However, if you plan to remain in the RENEW 900 for more than 10 to 15 minutes, a lower temperature is rec­ommended. Lower temperatures are also rec­ommended for children.
26. WARNING—To reduce the risk of injury: Always use an accurate thermometer to determine the water temperature before using the RENEW 900.
27. WARNING—To reduce the risk of injury: Pregnant women should consult with their physician before using the RENEW 900. Pregnant women should not use the RENEW 900 if the water temperature is above 100°F (38°C); the unborn child could be seriously harmed.
28. DANGER—To reduce the risk of drowning: Prolonged immersion in the RENEW 900 may cause hyperthermia, a dangerous condition which occurs when the internal body temper­ature rises several degrees above the normal body temperature of 98.6°F. The symptoms of hyperthermia are nausea, dizziness, drowsi­ness, and fainting. Effects include: a lack of awareness, inability to perceive heat or dan­ger, and a greater risk of drowning due to a loss of consciousness. Special note:
Individuals suffering from hyperthermia may be unable to realize that they must exit the RENEW 900, and they also may be physically unable to do so.
29. WARNING—To reduce the risk of drowning: Heat from the water, in conjunction with alco­hol or drugs can cause unconsciousness. Do
not use the RENEW 900 if you are under the influence of drugs or alcohol.
30. WARNING—To reduce the risk of injury or drowning: Consult your physician about pos­sible side-effects of any medications you may be taking before using the RENEW 900. Heat from the water, in conjunction with some med­ications may cause drowsiness and increase the risk of drowning. Others can effect blood pressure, heart rate, and circulation.
31. WARNING—To reduce the risk of injury: It is especially important for persons over the age of 35 or persons with pre-existing health problems, such as obesity, heart disease, high or low blood pressure, circulatory prob­lems, or diabetes to consult your physician before using this product.
32. If you feel pain or dizziness at any time while using the RENEW 900, discontinue use and contact a physician.
WARNING: Read all instructions before using the RENEW 900. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
5
WARNING DECAL PLACEMENT
The decals shown below have been placed on the RENEW 900. If a decal is missing, or if it is not legible, please call our Customer Service Department toll-free at 1-888-936-4266, Monday–Thursday, 8:00 am–6:30 pm; Friday, 8:00 am–6:00 pm EST (excluding holidays), to order a replacement decal. Apply the decal in the location shown.
IMAGE®is a registered trademark of ICON Health & Fitness, Inc.
6
BEFORE YOU BEGIN
Thank you for selecting the IMAGE®RENEW 900. The innovative RENEW 900 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RENEW 900 is fully portable, so you can take it wherever there is an electrical outlet. The RENEW 900 allows you to relax and unwind in the comfort of your own home.
For your benefit, read this manual carefully before using the IMAGE
®
RENEW 900. If you have addition-
al questions, please call our Customer Service
Department toll-free at 1-888-936-4266, Monday– Thursday, 8:00 am–6:30 pm; Friday, 8:00 am–6:00 pm EST (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is
831.100430. The serial number can be found on a
decal attached to spa jet unit (see the front cover of this manual).
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
Spa Jet Unit
Inflation Valve
Side Panel
Locking Buckle
Console (Under Spa Cover)
Spa Cover
Power Cord
Ground Fault Circuit Interrupter (GFCI)
7
CHOOSING A LOCATION FOR THE RENEW 900
There are many factors to consider when choosing a location to set up the RENEW 900. These factors vary depending on whether you use the RENEW 900 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RENEW 900.
If you set up the RENEW 900 inside:
1. The RENEW 900 will increase the level of humidi­ty in your home. The location you choose should be well ventilated. You may need to install a venti­lation fan or use a dehumidifier.
2. The location must be close to an electrical outlet.
Do not use an extension cord with the RENEW
900.
3. The RENEW 900 should be close to a source of water.
4. Do not use the RENEW 900 on carpet or other material that may be damaged by moisture. We recommend that you place the RENEW 900 on a water- and stain-resistant, non-slip surface with a floor drain for any water that may splash from the RENEW 900.
5. Be sure that the location you choose is stable. It must be able to support the weight of the RENEW 900 when it is filled with water, plus the weight of the occupants. The RENEW 900 weighs approxi­mately 2400 pounds when filled with water.
6. Do not use the RENEW 900 above a finished liv­ing area, due to the risk of water damage.
7. Be sure that there is room around the RENEW 900 to permit servicing of the unit. The diameter of the tub is 69”. You should allow for this size, plus the size of the spa jet unit, when choosing the location.
8. Be sure to note any other considerations, such as aesthetics or privacy concerns, that may affect the safety or enjoyment of using the RENEW 900.
If you set up the RENEW 900 outside:
1. You should check your local building codes con­cerning the use of outdoor spas.
2. The location must be close to an electrical outlet.
Do not use an extension cord with the RENEW
900.
3. The RENEW 900 should be close to a source of water.
4. We recommend that you place the RENEW 900 on a water- and stain-resistant, non-slip surface.
5. Be sure that the location you choose is stable. It must be able to support the weight of the RENEW 900 when it is filled with water, plus the weight of the occupants. The RENEW 900 weighs approxi­mately 2400 pounds when filled with water.
6. Think about environmental factors, such as rain, wind, shade, sunlight, and so forth.
7. You should be able to monitor the use of the RENEW 900 from your home, to prevent unautho­rized use by children.
8. Be sure that there is room around the RENEW 900 to permit servicing of the unit. The diameter of the tub is 69”. You should allow for this size, plus the size of the spa jet unit, when choosing the location.
9. Be sure to note any other considerations, such as aesthetics or privacy concerns, which may affect the safety or enjoyment of using the RENEW 900.
Loading...
+ 16 hidden pages