Write the serial number in the
space above for reference. The
serial number decal is on the
frame behind the access cover.
QUESTIONS?
PLEASE CALL DIRECT TO OUR
TOLL-FREE CUSTOMER HOT
LINE. The trained technicians
on our customer hot line will
provide immediate assistance,
free of charge to you.
USERʼS MANUAL
CUSTOMER HOT LINE:
1-877-897-7493
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. ICON extends a limited five (5) year warranty on the spa shell structure. ICON also extends a limited two (2) year warranty on the pump and motor. This warranty extends only to the original purchaser.
ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product
through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. This warranty does not extend to any product or damage to a product caused by or
attributable to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by
ICON authorized service personnel, to products used for commercial or rental purposes, or to products
used as store display models. Specifically excluded are damages caused by or attributable to the following incidents: any damage to the wood exterior resulting from improper maintenance, or any damage to
the wood or tile exterior attributable to freight mishandling; damage resulting from improper winterization;
damage to the spa shell resulting from improper chemical treatment, damage to the spa shell resulting
from exposure to extreme temperatures, or damage to the spa shell resulting from exposure to direct sunlight and ultraviolet rays while the spa is empty; damage to the pump, motor, plumbing, and components
due to improper maintenance, chemical treatment, or exposure; damage resulting from failure to properly follow userʼs manual installation, operating, or maintenance instructions. Also excluded are consumable
components, including but not restricted to headrests, filter cartridges, and light bulbs. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of or damage to property including water damage, loss of revenues or profits, loss of enjoyment or use,
costs of removal, installation or other consequential damages of whatsoever nature. Some states do not
allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation
may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to
state.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJURY, READ
HE FOLLOWING IMPORTANT PRECAUTIONS BEFORE USING THE RENEW 515.
T
READ AND FOLLOW ALL INSTRUCTIONS
1. It is the responsibility of the owner to ensure
that all users of the hydrotherapy spa are
adequately informed of all precautions.
2. Use the hydrotherapy spa only as described
in this manual.
3. The hydrotherapy spa is intended for home
use only. Do not use the spa in any commercial, rental, or institutional setting.
4. Use the hydrotherapy spa only on a level
surface. Do not use the spa on carpet or
other materials that could be damaged by
moisture. Do not use the spa on rough or
sharp surfaces such as gravel or wood
chips.
5. The hydrotherapy spa will weigh approximately 2,000 pounds (908 kgs) when it is
filled with water. Be sure that the location
you select for the spa will support this
weight, plus the weight of the occupants.
6. Inspect and tighten all parts regularly; replace
any worn or missing parts immediately.
7. DANGER—Risk of injury: Do not remove or
alter the covers on the suction fittings. Never
operate the hydrotherapy spa if the suction
guard is missing or broken. If you need to
replace a suction fitting, be sure to use only
manufacturer-recommended parts. Keep hair
and body parts away from the suction guard.
Do not allow long hair to float freely in the
water; long hair should be restrained with a
bathing cap.
py spa that could damage the spa shell.
10. Never insert any object into any opening.
11. Do not use breakable containers near or in
the hydrotherapy spa.
12. Do not sit on the spa cover or place objects
on it. It is not designed to support weight.
13. Remove any water or debris that may collect
on the spa cover.
14. Keep children under 12 and pets away from
the hydrotherapy spa when it is not in use.
15. Keep all chemicals away from children and
pets.
16. The pH and chemical balance of the water
must be maintained as explained in this manual (see pages 11 and 16). Failure to do so
may cause injury to users or damage to the
spa, and it will void the warranty.
17. Individuals with infections and open sores or
wounds should not use the hydrotherapy
spa. Bacteria thrive in warm and hot water.
Always keep the spa disinfected and maintain the proper chemical balance.
18. Shower before and after using the hydrotherapy spa. This will remove any deodorant,
perspiration, or body oils that could contaminate the water. Showering after will remove
any residual chemicals and any bacteria that
may have been in the spa.
8. IMPORTANT: Do not allow the hydrotherapy
spa to be exposed to direct sunlight when it
is empty. The surface of the spa shell can
reach temperatures as high as 150°F (65°C)
in a matter of minutes if exposed to the sun
while it is empty. These high temperatures
can cause significant damage, such as blistering of the shell surface and warping of the
spa shell. Any damage caused by sun exposure is not covered under warranty.
9. Do not bring any object into the hydrothera-
19. WARNING—The Ground Fault Circuit
Interrupter (GFCI), must be tested before
each use. To test the GFCI, press the “test”
button while the hydrotherapy spa is running. The spa should shut off. Press the
“reset” button. The spa should resume normal operation. If the spa continues to run
after the “test” button is pressed, then the
GFCI is damaged. Do not use the spa until
the GFCI has been repaired or replaced by a
qualified electrician.
3
20. Keep all electrical appliances such as radios,
telephones, televisions and lights at least
five feet (1.5 m) away from the water.
21. DANGER—Risk of electric shock: Do not set
up the hydrotherapy spa within five feet (1.5
m) of any metal objects or surfaces. As an
alternative, you may use the spa within five
eet (1.5 m) of metal objects if each metal
f
object is permanently connected to the bonding LVG on the controller of this unit by a
minimum No. 6 AWG (1.3 mm
2
) solid copper
conductor. At least two lugs marked “BONDING LUGS” are provided on the external surface or on the inside of the supply terminal
box or compartment. To reduce the risk of
electric shock, connect the local common
bonding grid in the area of the hot tub or spa
to these terminals with an insulated or bare
copper conductor not smaller than 6 AWG.
All field-installed metal components such as
rails, ladders, drains, or other similar hardware within 3 m of the spa or hot tub shall be
bonded to the equipment grounding bus with
copper conductors not smaller than 6 AWG.
22 Do not operate the pump motor when the spa
is empty. The pump motor may be seriously
damaged if it is operated without water circulating. The cut-off valves must always be open
when using the spa (see step 2 on page 8).
23. DANGER—Risk of drowning: Exercise
extreme caution to prevent unauthorized and
unsupervised use of the hydrotherapy spa by
children. Children must always be supervised.
24. DANGER—To reduce the risk of drowning:
• Never use the hydrotherapy spa alone;
• Children should not use the spa unless
they are supervised by an adult;
• Keep pets away from the spa at all times;
• Always replace and lock the spa cover
when the spa is not in use.
26. WARNING—To reduce the risk of injury:
Always use an accurate thermometer to
determine the water temperature before
using the hydrotherapy spa.
27 WARNING—To reduce the risk of injury:
Pregnant women should consult with their
physician before using the hydrotherapy spa.
regnant women should not use the spa if
P
the water temperature is above 100°F (38°C);
the unborn child could be seriously harmed.
This is especially important during the first
90 days of the pregnancy.
28. DANGER—To reduce the risk of drowning:
Prolonged immersion in the hydrotherapy
spa may cause hyperthermia, a dangerous
condition that occurs when the internal body
temperature rises several degrees above the
normal body temperature of 98.6°F (37°C).
The symptoms of hyperthermia include nausea, dizziness, drowsiness, and fainting.
Effects include: a lack of awareness, inability
to perceive heat or danger, and a greater risk
of drowning due to a loss of consciousness.
Special note: Individuals suffering from
hyperthermia may be unable to realize that
they must exit the hydrotherapy spa, and
they also may be physically unable to do so.
29. WARNING—To reduce the risk of drowning:
Do not use the hydrotherapy spa if you are
under the influence of alcohol or drugs. Heat
from the water, in conjunction with alcohol or
drugs can cause loss of consciousness.
30. WARNING—To reduce the risk of injury or
drowning: Consult your physician about possible side-effects of any medications you
may be taking before using the hydrotherapy
spa. Heat from the water, in conjunction with
some medications, may cause drowsiness
and increase the risk of drowning. Others
can effect blood pressure, heart rate, and circulation.
25. WARNING—To reduce the risk of injury: The
water temperature should never exceed
104°F (40°C). Water temperature in excess of
100°F (38°C) may be injurious to your health.
If you plan to remain in the hydrotherapy spa
for more than 10 to 15 minutes, lower the
temperature to 100°F (38°C) or below. Lower
temperatures are also recommended for children. Children should not be allowed to swim
under the surface of the water in the spa.
31. Do not use the hydrotherapy spa immediately after strenuous exercise.
32. To avoid injury, exercise care when entering
or exiting the spa.
33. WARNING—To reduce the risk of injury: It is
especially important for persons over the age
of 35 or persons with pre-existing health
problems, such as obesity, heart disease,
high or low blood pressure, circulatory prob-
4
lems, or diabetes to consult their physician
Continuous exposure of the spa surface to direct
sunlight or ultra-violet rays may cause damage to
the spa’s surface, will void the warranty, and will
result in potentially hazardous surface
temperatures.To avoid sun damage, the cover
should be in place when the spa is not in use.
before using this product.
34. WARNING—The included warning sign must
be posted where all users of the spa can see
and read it (see POSTING THE WARNING
SIGN on page 13).
5. CAUTION—The hydrotherapy spa is not
3
designed for in-ground installation. Do not
install the hydrotherapy spa in-ground.
36. Disconnect the electric power supply before
servicing the spa.
37. If you feel pain or dizziness at any time while
using the hydrotherapy spa, discontinue use
and contact a physician.
38. Minimum Electrical Ratings:
• 240 Volt Minimum Supply Conductor
Ampacity: 40 Amps
• 240 Volt Minimum Breaker/Fuse: 40 Amps
• 120 Volt Minimum Supply Conductor
Ampacity: 15 Amps
• 120 Volt Minimum Breaker/Fuse: 15 Amps
39. A green terminal or a terminalmarked G, GR,
Ground, Grounding, or with the symbol
is located inside the supply terminal box or
compartment. To reduce the risk of electric
shock, this terminal must be connected to
the grounding means provided in the electric
supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment.
40. WARNING DECAL PLACEMENT: Locate the
decals shown at right and familiarize yourself
with this information.
WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility
for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
5
BEFORE YOU BEGIN
hank you for selecting the innovative IMAGE
T
515 hydrotherapy spa. The RENEW 515 offers the
features and quality of a traditional hot tub at an
affordable price. And best of all, the RENEW 515 lets
ou enjoy the benefits of hydrotherapy in the comfort
y
and privacy of your own home.
Hydrotherapy is a proven method for soothing tired
muscles after exercise or for relieving the stress of a
busy life. The warm environment stimulates blood flow,
which is essential in the healing process, and the powerful massage action further eases tension and stress
throughout the body. The RENEW 515 gives you the
specialized treatment you need to feel your best.
Light
Access
Cover
Filter
®
enew
R
Console
or your safety and benefit, read this manual care-
F
fully before using the RENEW 515. If you have addi-
tional questions, please call our Customer Service
Department at 1-877-897-7493, Monday through
riday, 6 a.m. until 6 p.m. Mountain Time (excluding
F
holidays). To help us assist you, please note the product model number and serial number before calling.
The model number is 831.105150. The serial number
can be found on a decal attached to frame inside the
spa (see the front cover of this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Spa Shell
Spa Cover
Wood Panels
Cover Latch
Locking
Buckle
6
CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA
There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary
depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may
wish to consider as you decide where you want to use the hydrotherapy spa.
If you set up the hydrotherapy spa inside:
1. The hydrotherapy spa will increase the level of
humidity in your home. The location you choose
should be well ventilated. You may need to install
a ventilation fan or use a dehumidifier.
2. The hydrotherapy spa should be close to a source
of water.
3. Do not use the hydrotherapy spa on carpet or
other material that may be damaged by moisture.
We recommend that you place the hydrotherapy
spa on a water- and stain-resistant, non-slip surface with a floor drain for any water that may
splash from the hydrotherapy spa.
4. Be sure that the location you choose is stable. It
must be able to support the weight of the
hydrotherapy spa when it is filled with water, plus
the weight of the occupants. The hydrotherapy
spa weighs approximately 2,000 pounds (908 kgs)
when filled with water.
5. Do not use the hydrotherapy spa above a finished
living area, due to the risk of water damage.
6. Make sure that there is enough room around the
hydrotherapy spa to permit servicing. The dimensions of the spa are: 5ʼ 10” W x 6ʼ 4” L x 2ʼ 6” H
(153 cm x 183 cm x 61 cm). Allow for this size
when choosing the location.
7. The hydrotherapy spa is not designed for in-floor
installation. However, it is compatible with a deck
system that is built flush with the top of the spa,
provided you leave access to the motor for servicing.
8. Make sure to note any other considerations, such
as aesthetics or privacy concerns, that may affect
the safety or enjoyment of using the hydrotherapy
spa.
If you set up the hydrotherapy spa outside:
1. Check your local building codes concerning the
use of outdoor spas.
2. The hydrotherapy spa should be close to a source
of water.
3. We recommend that you place the hydrotherapy
spa on a water- and stain-resistant, non-slip surface. Do not use the hydrotherapy spa on rough
or sharp surfaces such as gravel or wood chips.
4. Make sure that the location you choose is stable.
It must be able to support the weight of the
hydrotherapy spa when it is filled with water, plus
the weight of the occupants. The hydrotherapy
spa weighs approximately 2,000 pounds (908 kgs)
when filled with water.
5. Consider environmental factors such as rain, wind,
shade, sunlight, etc.
6. You should be able to monitor the use of the
hydrotherapy spa from your home to prevent
unauthorized use by children. You may want to
enclose the spa with a fence and self-latching
gate to prevent unauthorized use.
7. Make sure that there is enough room around the
hydrotherapy spa to permit servicing. The dimensions of the spa are: 5ʼ 10” W x 6ʼ 4” L x 2ʼ 6” H
(153 cm x 183 cm x 61 cm). Allow for this size
when choosing the location.
8. The hydrotherapy spa is not designed for inground installation. However, it is compatible with
a deck system that is built flush with the top of the
spa, provided you leave access to the motor for
servicing.
9. Make sure to note any other considerations, such
as aesthetics or privacy, that may affect the safety
or enjoyment of using the hydrotherapy spa.
7
SET-UP AND ASSEMBLY
efore beginning assembly, carefully read the
B
following information and instructions:
• Place all parts in a cleared area and remove the
acking materials from the spa shell; do not dis-
p
pose of the packing materials until assembly is
completed and the spa is in operation.
• Assembly requires two people.
• During assembly, make sure that all parts are ori-
ented as shown in the drawings.
1. Before beginning assembly, make sure that you
have read and understand the information on
the previous two pages.
Remove the four cover screws from the access
cover. Remove the access cover from the Spa Unit
(15) by sliding the access cover down and pulling
the bottom of the access cover away from the Spa
Unit. Be careful not to damage the spa shell.
Read each assembly step before you begin.
•
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
ASSEMBLY REQUIRES THE FOLLOWING
TOOLS (NOT INCLUDED):
• One (1) phillips screwdriver
• You may also need a small amount of soap
or wax.
1
Spa
Shell
15
2. Locate and check the positions of the two cut-off
valves. The cut-off valves may have been closed at
the factory during manufacturing. However, the cutoff valves must be open when the spa is operated.
To open the valves, turn the handles and pull them
out to the open position. IMPORTANT: THE
MOTOR WILL BE DAMAGED IF IT IS OPERATED
WITH THE CUT-OFF VALVES CLOSED.
Next, close the valve knob on the drain hose.
Thread the cap onto the drain hose. Thread the
drain plug into the Pump Motor (13). Tighten the
pump fittings.
2
Cap
Cut-off
Valve
Valve
Knob
Access
Cover
Access Cover
Drain
Plug
Screws
Cut-off Valve
13
Drain Hose
Pump
Fittings
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.