Warranty
Contact Information
For Warranty Information and the most up-to-date version of this
User’s Guide, go to: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Website: www.iLiveElectronics.com
Warnings and Precautions
• WARNING: To prevent re or shock hazards,
do not expose this unit to rain or moisture.
• WARNING: Do not place the unit on top of
any soft, porous, or sensitive surfaces to avoid
damaging the surface. Use a protective barrier
between the unit and surface to protect the surface.
• WARNING : Where the mains plug or appliance
coupler is used as the disconnect device, such
disconnect device shall remain readily operable.
• Note : This device uses an internal rechargeable
lithium-ion battery that should last the lifetime
of the device. If you suspect your battery
may be dead after several attempts to charge,
please contact 1-888-999-4215 for support.
• Never disassemble the unit or attempt to
remove the battery as that could cause
leakage of an electrolytic substance.
Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Warnings
Pairing a Bluetooth Device
1. Turn on the unit using the On/O switch. The
Pairing Indicator will ash blue quickly.
2. Press and hold the Pair button until a beep sounds.
When pairing, remain within 3 feet of the unit.
3. Using the native controls on your Bluetooth device,
select the “ISB182” in your Bluetooth settings to pair.
If your device requests a password, enter the default password “ 0 0 0 0 ”. Refer to the user’s
manual for your specic device for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired and connected, the Pairing Indicator
will display a solid blue light and a beep will sound from the unit.
After initial pairing, the unit will stay paired unless unpaired manually by the user.
Playing Audio Wirelessly
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected
Bluetooth device to select a track.
3. To play, pause or skip the selected track, use the
native controls on the connected Bluetooth device
or press the Play/Pause button on the unit.
4. Audio played through the connected Bluetooth
device will now be heard through the speakers.
5. Press and hold the Vol+/Vol- buttons to adjust the volume.
Loading...