ATTENTION
PLEASE READ THESE INSTRUCTIONS BEFORE USING
Important note
While the wireless speakers were paired at the factory to allow for immediate operation, they will
occasionally become un-paired in transit. Un-pairing can also occur in day-to-day operation due to different
environmental inuences. This is normal. Should this occur, please follow the pairing instructions below.
PAIRING THE WIRELESS SPEAKERS WITH THE BASE STATION
What does it mean to pair?
Pairing allows the base station to recognize a wireless speaker. Once a wireless speaker is paired, the base unit will
transmit audio to it.
Pairing
1. Keep the base station and all wireless speakers within
4 feet of each other when you pair them.
2. Plug the base station into a power source and press
the Power button to power the base station on.
The base station Link Indicator will ash when the
base station is powered on.
3. Plug the wireless speaker into a power source or
insert 6 D batteries (not included) and press the
Power button to power the wireless speaker on.
The wireless speaker Link Indicator will ash when
the wireless speaker is powered on.
4. Adjust the Volume on the wireless speaker to
approximately half-way between min. and max. volume.
5. Simultaneously press and hold the Pair button on
the base station and the Pair button on the wireless
speaker for 5 seconds.
6. The wireless speaker will emit a long beep when it is
paired with the base station.
After pairing, the speaker may take up to 30 seconds
to begin playing audio from the base station.
Base Station
Link Indicator Pair Button Power Button
Wireless Speaker
Pair ButtonVolume ControlLink Indicator Power Button
If the wireless speaker emits short repeating beeps,
it was not able to pair with the base station. Repeat
steps 1-5 until you hear the long beep.
Repeat steps 1-5 for each additional wireless speaker.
Additional information
Once paired, the wireless speaker can be moved up to 200ft (line-of-site) or up to
90ft (indoors) depending on environmental conditions. Should the sound drop or
become garbled it will be necessary to move the speaker to another location in order
to receive the signal clearly.
Up to 20 wireless speakers can be paired with one base station. Additional speakers
sold separately.
CUSTOMER HELPLINE | 1-314-621-2881 www.iLive.net iLive | IS819B
Front Back
Link Indicator System Status
O Powered o
Slow Flashes Standby mode
Quick Flashes Attempting to pair
Solid Light Paired and playing