ikan V17 User Manual

QUICK START GUIDE / V17 LCD MONITOR

INTRODUCTION

Thank you for purchasing the ikan V17 LCD Monitor. We know that you will be satisfied with our “V” series monitors.
Please visit www.ikancorp.com for more information on our current and future products including our award-winning
fluorescent studio lights and light accessories.

PACKAGE INCLUDES

 V17 LCD Monitor
 AC Power Adapter

GETTING STARTED

1. Powering The Monitor. To do this, you have two options.
a) You can plug the AC power cord into the power input jack located on the right side of the rear of the monitor.
b) You can connect a pro battery using the optional pro battery plate and then plugging that plate into the DC-In
connector. The pro battery plate kits (PBPK-S or PBPK-A) allow you to go into the field using standard V-Mount
or Gold-Mount batteries.

2. Connecting The Video Source
The V17 allows you to connect to your source feed, using any of the following connections: S-Video (Y/C),
SD/HD Component, Composite (A/V), and HDMI Inputs/Outputs.

MONITOR DIAGRAMS

Checked by

12v-24v

DC IN

2

9

V17

1. POWER Power switch (I = AC On, O = Off, II = DC On)

2. LAMP Power signal indicator

3. GUIDES On-screen guide: 4:3 or 16:9

4. ASPECT Aspect ratio: 4:3 or 16:9

5. INPUT A/V (Composite), S-Video, SD/HD Component, HDMI

6. > While in MENU mode, toggle as up adjust setting

7. MENU Access to all monitor settings: Brightness, Hue, etc.

8. < While in MENU mode, toggle as down adjust setting

9. LAMP Tally Lights

[ Labeling Box ]

< MENU > INPUT ASPECT GUIDE

AC In

345678

1

2

8

DC In

1. AC 110V-220V Power Connection

2. DC 12V-24V Power Connection

9

9

9

IN OUT

3
4

5

6

COMPONENT

HDMI

VIDEO

S-VIDEO

7

RED

YELLOW

GREEN

5

4

3 2 1

9 8 7 6

GND

GND

GND

TALLY

110~220v

Y

Pb

AC IN

Pr

1

3. HDMI Input

4. A/V - I/O for standard definition composite signal

5. S-Video - I/O for standard definition S-Video signal

6. Component - I/O for standard definition, 720p, and 1080i HD signals

7. Tally

8. Handle

9. 100mm Holes for Vesa Mount / Pro Battery Mounting Plates

Tally Light - Pin Configurations

RED

GREEN

GND

3

YELLOW

2 1

7 6

GND

5

4

9 8

GND

Tally Light Operation

• Do not provide power to tally connections.

• Tally light system is unpowered and works by closing

the contact between any of the grounding pins and the
pin for the desired LED color.

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

• The components and maintenance service fee will be charged if the warranty period has expired.

Free Service will not be Provided in the Following Situations: (

** Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.

V17-031909-03

3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822. [e-mail] © 2009 ikan Corporation. All right reserved. www.ikancorp.com